Filip Jerenec

1. JERENEC, Filip. Konstrukcija orodja za preoblikovanje cevi : diplomsko delo. [F. Jerenec]; Maribor, 2018. VII, 31 f., ilustr. https://dk.um.si/IzpisGradiva.php?lang=slv&id=71961, Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 22231574]

2. JERENEC, Filip. Simuliranje duktilnega loma s pomočjo GTN mikromehanskega poškodbenega modela : magistrsko delo. Maribor: [F. Jerenec], 2020. X, 56 f., ilustr. https://dk.um.si/IzpisGradiva.php?lang=slv&id=78351, Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 47255555]

3. GUBELJAK, Nenad, JERENEC, Filip. Fracture toughness testing report for material KATO1 ESU. Maribor: Faculty of Mechanical Engineering, 2021. 21 f., ilustr. [COBISS.SI-ID 67255299]

4. GUBELJAK, Nenad, JERENEC, Filip. Fracture toughness testing report for material KATO1 ESU "Breech block". Maribor: Faculty of Mechanical Engineering, 2021. 20 f., ilustr. [COBISS.SI-ID 67117059]

5. GUBELJAK, Nenad, JERENEC, Filip. Fracture toughness testing report for material KATO1 ESU "Breech ring". Maribor: Faculty of Mechanical Engineering, 2021. 18 f., ilustr. [COBISS.SI-ID 67115267]

6. JURKO, Lucija, BRAČIČ, Matej, HRIBERNIK, Silvo, MAKUC, Damjan, PLAVEC, Janez, JERENEC, Filip, ŽABKAR, Sonja, GUBELJAK, Nenad, ŠTERN, Alja, KARGL, Rupert. Succinylation of polyallylamine: influence on biological efficacy and the formation of electrospun fibers. Polymers. Avg. 2021, vol. 13, iss. 17, str. 1-13, ilustr. ISSN 2073-4360. https://www.mdpi.com/2073-4360/13/17/2840, DiRROS - Digitalni repozitorij raziskovalnih organizacij Slovenije, DOI: 10.3390/polym13172840. [COBISS.SI-ID 73979907]

7. DOMITNER, Josef, SILVAYEH, Zahra, PREDAN, Jožef, JERENEC, Filip, AUER, Peter, STIPPICH, Jennifer, FERLIČ, Luka, ŠTEFANE, Primož, SOMMITSCH, Christof, GUBELJAK, Nenad. Influence of the sheet edge condition on the fracture behavior of riv-bonded aluminum-magnesium joints. V: VINCZE, Gabriela (ur.), BARLAT, Frederic (ur.). Achievements and trends in material forming : peer-reviewed extended papers selected from the 25th International Conference on Material Forming (ESAFORM 2022) : April 27-29, 2022, Portugal. Zurich: Trans Tech Publications: Scientific.Net, cop. 2022. Vol. 926, str. 1541-1548, ilustr. Key engineering materials, Vol. 926. ISSN 1662-9795, ISSN 1013-9826. https://www.scientific.net/KEM.926.1541, https://main.scientific.net/book/achievements-and-trends-in-material-forming/978-3-0357-3750-9/ebook, DOI: 10.4028/p-001s3t. [COBISS.SI-ID 140518659]

8. BRAČKO, Brin. Vpliv oslabitve in ojačitve natezno obremenjene komponente iz materiala AISI 316L na nastanek in rast razpok : diplomsko delo. Maribor: [B. Bračko], 2023. 1 spletni vir (1 datoteka PDF (VIII, 38 f.)), ilustr. Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 187630339]

9. FERLIČ, Luka, JERENEC, Filip, ŠERCER, Mario, DRSTVENŠEK, Igor, GUBELJAK, Nenad. The influence of the ratio of circumference to cross-sectional area of tensile bars on the fatigue life of additive manufactured AISI 316L steel. Metals. Nov. 2024, vol. 14, iss. 11, [article no.] 1246, 28 str., ilustr. ISSN 2075-4701. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/met14111246. [COBISS.SI-ID 214295555]
projekt: Slovenian Agency for Research and Development ARIS for funding Research Program P2-0137 “Numerical and Experimental Analysis Mechanical Systems” and Metal Centre Čakovec in Croatia under the project KK.01.1.1.02.0023.

10. JERENEC, Filip, ZHANG, Yanan, FERLIČ, Luka, GUBELJAK, Nenad, MADENCI, Erdogan. A new calibration approach of kinetic theory of fracture for fatigue life prediction in a peridynamic/finite element framework. Engineering with computers. [Online ed.]. Dec. 2024, [14] str., ilustr. ISSN 1435-5663. DOI: 10.1007/s00366-024-02097-6. [COBISS.SI-ID 219856643]
projekt: This work was supported by Javna Agencija za Raziskovalno Dejavnost RS.

11. SIMONOVIĆ, Vojislav, VEG, Emil, MILOŠEVIĆ, Miloš, MILKOVIĆ, Dragan, JERENEC, Filip, GUBELJAK, Nenad. Simple method for measuring and mapping of site-specific draft force during plowing : Elektronski vir. Tehnički vjesnik. 2024, vol. 31, no. 6, str. 1923-1929. ISSN 1848-6339. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.17559/TV-20240419001474. [COBISS.SI-ID 229235971]
projekt: This work was supported by the National Research Projects of the Republic of Serbia Ministry of Education, Science, and Technological Development, Project of Technological Development under Grant (Contract number 451-03-65/2024-03/200105 from 05.02.2024).

12. JERENEC, Filip, ZHANG, Yanan, FERLIČ, Luka, GUBELJAK, Nenad, MADENCI, Erdogan. Simuliranje utrujenostne rasti razpoke z uporabo KTF modela in Peridinamičnih simulacij = Simulating fatigue crack growth using the KTF model in Peridynamic simulations. V: HARL, Boštjan (ur.), GUBELJAK, Nenad (ur.). Kuhljevi dnevi 2024 : Ptuj, 19. - 20. september 2024 : zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2024. Str. 132-141, ilustr. ISBN 978-961-93859-9-9. http://www.drustvozamehaniko.si/zbornik/ZbornikKD2024.pdf. [COBISS.SI-ID 211252483]
projekt: Posebna zahvala gre Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije (ARIS) za njihovo finančno podporo raziskovalnim dejavnostim na Fakulteti za strojništvo Univerze v Mariboru. Prav tako še iskrena zahvala ARRS za financiranje bilateralnega projekta med Univerzo v Mariboru in Univerzo v Arizoni, ki je pomembno izboljšalo sodelovalna prizadevanja med tema institucijama.

13. JERENEC, Filip. Peridynamic modeling of fatigue in layered metal composites : doctoral dissertation. Maribor: [F. Jerenec], 2025. XVI, 185 str., ilustr. Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 266349827]

14. JERENEC, Filip, NISHI, Masatoshi, NOVAK, Nejc, REN, Zoran. Demonstracija postopka analize eksplozijskega vala pri avksetični zaščitni strukturi z uporabo Viper::Blast in LS-DYNA = Demonstration of a blast-analysis workflow for auxetic protective structures using Viper::Blast and LS-DYNA. V: HARL, Boštjan (ur.), GUBELJAK, Nenad (ur.). Kuhljevi dnevi 2026 : zbornik del : Čatež, 16.-18. september 2026. Ljubljana: Slovensko društvo za mehaniko, 2026. Str. 193-202, ilustr. ISBN 978-961-97116-1-3. http://drustvozamehaniko.si/zbornik/ZbornikKD2026.pdf. [COBISS.SI-ID 292621827]

15. JERENEC, Filip, GUBELJAK, Nenad, MADENCI, Erdogan, FERLIČ, Luka. Fatigue crack growth prediction in AISI 316L using a peridynamic KTF approach. V: ICFC14 : 14th International Fatigue Congress : 28 June-3 July 2026, Funchal, Madeira, Portugal. [S. l.: s. n., 2026]. Str. 411, ilustr. https://ifc14.tecnico.ulisboa.pt/assets/files/Book_of_Abstracts.pdf. [COBISS.SI-ID 287807235]

16. JERENEC, Filip, NISHI, Masatoshi, REN, Zoran, NOVAK, Nejc. Numerical investigation of auxetic sandwich structures under realistic urban blast loading. V: DOKTOR, Tomáš (ur.), JIROUŠEK, Ondřej (ur.), ZLÁMAL, Petr (ur.). ISIE 2026 ; 12th International Symposium on Impact Engineering : book of abstracts : 2-4 september 2026, Prague, Czech Republic. Prague: Czech Technical University, 2026. Str. 41. ISBN 978-80-01-07588-3. https://isie2026.fd.cvut.cz/abstract-submission. [COBISS.SI-ID 290246147]

17. JERENEC, Filip, ZHANG, Yanan, FERLIČ, Luka, GUBELJAK, Nenad, MADENCI, Erdogan. Peridynamics as a framework for fatigue crack growth prediction in metallic components. V: KYTÝŘ, Daniel (ur.), ZLÁMAL, Petr (ur.), ZAPLATIĆ, Andrija (ur.). IMEKO TC15 Collegium 2026 : book of abstracts : June 10-12 2026, Prague, Czech Republic. Prague: Czech Academy of Sciences, Institute of Theoretical and Applied Mechanics, [CAS], 2026. Str. 15. ISBN 978-80-53071-01-7. https://tc15collegium2026.itam.cas.cz/BofA.php. [COBISS.SI-ID 284907011]
projekt: The authors acknowledge the support of the Slovenian Research and Innovation Agency (ARIS) within programme P2-0137 and the bilateral collaboration between the University of Maribor and the University of Arizona.

18. FERLIČ, Luka, GUBELJAK, Nenad, MADENCI, Erdogan, CHAPETTI, Mirco Daniel, JERENEC, Filip. Prediction of critical defect size in additively manufactured AISI 316L using a coupled peridynamic – Chappetti fatigue model. V: ICFC14 : 14th International Fatigue Congress : 28 June-3 July 2026, Funchal, Madeira, Portugal. [S. l.: s. n., 2026]. Str. 410, ilustr. https://ifc14.tecnico.ulisboa.pt/assets/files/Book_of_Abstracts.pdf. [COBISS.SI-ID 287806211]

19. DONIK, Žiga, JERENEC, Filip. Zasnova pacientu prilagojene nepokrite žilne opornice na podlagi geometrijske karakterizacije aorte = Design of a patient-specific bare metal stent based on geometric characterization of the aorta. V: HARL, Boštjan (ur.), GUBELJAK, Nenad (ur.). Kuhljevi dnevi 2026 : zbornik del : Čatež, 16.-18. september 2026. Ljubljana: Slovensko društvo za mehaniko, 2026. Str. 226-234, ilustr. ISBN 978-961-97116-1-3. http://drustvozamehaniko.si/zbornik/ZbornikKD2026.pdf. [COBISS.SI-ID 292624643]
projekt: P2-0063; financer: ARIS
projekt: J7-60120; financer: ARIS