COBISS Kooperativni online bibliografski sistem in servisi COBISS

Lucijano Berus

Osebna bibliografija za obdobje 2014-2026

2014

1. BERUS, Lucijano. CAE analiza profila letalskega krila : diplomska naloga visokošolskega strokovnega študija. Novo mesto: [L. Berus], 2014. X, 48 f., ilustr. [COBISS.SI-ID 514086519]

2017

2. BERUS, Lucijano. Razvrščanje vzorcev z uporabo inteligentnih metod : magistrsko delo. Maribor: [L. Berus], 2017. X, 49 f., ilustr. Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 21149974]

2018

3. HERNAVS, Jernej, FICKO, Mirko, BERUS, Lucijano, RUDOLF, Rebeka, KLANČNIK, Simon. Deep learning in industry 4.0 - brief overview. Journal of production engineering. 2018, vol. 21, no. 2, str. 1-5. ISSN 1821-4932. http://www.jpe.ftn.uns.ac.rs/papers/2018/no2/1-Hernavs_JPE_21_No2.pdf, DOI: 10.24867/JPE-2018-02-001. [COBISS.SI-ID 21998870]
4. BERUS, Lucijano, KLANČNIK, Simon, KARNER, Timi, FICKO, Mirko. Development of a self-optimizing baking system. Advanced technologies and materials. 2018, vol. 43, no. 1, str. 27-32. ISSN 2620-0325. http://journal-atm.org/archive/vol-43-no-1-2018, DOI: 10.24867/ATM-2018-1-006. [COBISS.SI-ID 21879830]
5. GOTLIH, Janez, BERUS, Lucijano, RAZBORŠEK, Boštjan, KARNER, Timi, BREZOČNIK, Miran. Experimental evaluation of influence factors on robot machining accuracy. V: NOVAK, Nejc (ur.), et al. Book of abstracts. 1st Joint Conference of Postgraduate Students, DrLMZ 2018, Maribor, Slovenia, June 28-29, 2018. Maribor: University of Maribor, 2018. Str. 10. [COBISS.SI-ID 21636886]
6. BERUS, Lucijano, KLANČNIK, Simon, GOTLIH, Janez, FICKO, Mirko. Optimization of heating conditions inside oven with use of artificial intelligence. V: NOVAK, Nejc (ur.), et al. Book of abstracts. 1st Joint Conference of Postgraduate Students, DrLMZ 2018, Maribor, Slovenia, June 28-29, 2018. Maribor: University of Maribor, 2018. Str. 3. [COBISS.SI-ID 21634838]

2019

7. BERUS, Lucijano, KLANČNIK, Simon, HERNAVS, Jernej, FICKO, Mirko. Artificial neural networks in wind energy systems: a brief overview. V: NYERS, Jozsef (ur.). EXPRES 2019 : 11th International Symposium on Exploitation of Renewable Energy Sources and Efficiency : Subotica, Serbia, April 11-13, 2019 : proceedings. Subotica: Inženjersko-tehničko udruženje vojvođanskih Mađara, 2019. Str. 86-89, ilustr. ISBN 978-86-919769-4-1. [COBISS.SI-ID 26210563]
8. BERUS, Lucijano, KLANČNIK, Simon, BREZOČNIK, Miran, FICKO, Mirko. Classifying Parkinson's disease based on acoustic measures using artificial neural networks. Sensors. 2019, vol. 19, no. 1, str. 1-15, ilustr. ISSN 1424-8220. https://dk.um.si/Dokument.php?id=132026, Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/s19010016. [COBISS.SI-ID 21997846]
9. KARNER, Timi, GOTLIH, Janez, RAZBORŠEK, Boštjan, VUHERER, Tomaž, BERUS, Lucijano, GOTLIH, Karl. Use of single and double fractional Kelvin-Voigt model on viscoelastic elastomer. Smart materials and structures. [Print ed.]. 2019, vol. 29, no. 1, str. 1-11. ISSN 0964-1726. DOI: 10.1088/1361-665X/ab5337. [COBISS.SI-ID 22775574]

2020

10. Brain sciences. BERUS, Lucijano (recenzent 2020). Basel: MDPI AG, 2011-. ISSN 2076-3425. https://www.mdpi.com/journal/brainsci/about. [COBISS.SI-ID 519954201]
11. FICKO, Mirko, BERUS, Lucijano, PALČIČ, Iztok, KLANČNIK, Simon. Design of facility layout for Industry 4.0. V: KARABEGOVIĆ, Isak (ur.), et al. Handbook of research on integrating Industry 4.0 in business and manufacturing. Hershey: IGI Global, 2020. Str. 101-126. Advances in business information systems and analytics book series (Print), Advances in business information systems and analytics book series (Online). ISBN 978-1799-827-26-9. ISSN 2327-3275, ISSN 2327-3283. DOI: 10.4018/978-1-7998-2725-2.ch005. [COBISS.SI-ID 23122198]
12. BERUS, Lucijano, SKAKUN, Plavka, RAJNOVIĆ, Dragan, JANJATOVIC, Petar, ŠIĐANIN, Leposava P., FICKO, Mirko. Determination of the grain size in single-phase materials by edge detection and concatenation. Metals. Oct. 2020, vol. 10, iss. 10, str. 1-13. ISSN 2075-4701. DOI: 10.3390/met10101381. [COBISS.SI-ID 33011459]
13. HRIBERŠEK, Matija, BERUS, Lucijano, PUŠAVEC, Franci, KLANČNIK, Simon. Empirical modeling of liquefied nitrogen cooling impact during machining Inconel 718. Applied sciences. May 2020, vol. 10, iss. 10, str. 1-16, ilustr. ISSN 2076-3417. Repozitorij Univerze v Ljubljani – RUL, Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/app10103603. [COBISS.SI-ID 16781315]
14. RUTNIK, Rok. Napovedovanje intervencij z uporabo umetne inteligence : magistrsko delo. Maribor: [R. Rutnik], 2020. XII, 80 str., ilustr. https://dk.um.si/IzpisGradiva.php?lang=slv&id=77888, Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 38183427]
15. POTOČNIK, David, BERUS, Lucijano, FICKO, Mirko. Overview of grain size determination in metallography. V: JANKOVIĆ, Predrag (ur.). MASING 2020 ; The Fifth International Conference "Mechanical Engineering in XXI Century" : proceedings : Niš, December 09-10, 2020. Niš: Faculty of Mechanical Engineering, 2020. Str. 235-240, ilustr. "Mechanical Engineering in XXI Century". ISBN 978-86-6055-139-1. ISSN 2738-103X. [COBISS.SI-ID 46159107]

2021

16. HERNAVS, Jernej, BERUS, Lucijano, PERŠAK, Tadej, FICKO, Mirko, BREZOČNIK, Miran, KLANČNIK, Simon. Computer vision in manufacturing environment : chapter 6. V: KARABEGOVIĆ, Isak (ur.), BANJANOVIĆ-MEHMEDOVIĆ, Lejla (ur.). Service robots : advances in research and applications. New York: Nova Science Publishers, cop. 2021. Str. 99-111, ilustr. Robotics Research and Technology. ISBN 978-1-53619-573-6, ISBN 978-1-53619-643-6. [COBISS.SI-ID 73248259]
17. PALČIČ, Iztok, BERUS, Lucijano, FICKO, Mirko, KLANČNIK, Simon. Design of facility layout for Industry 4.0. V: KHOSROWPOUR, Mehdi (ur.). Research anthology on cross-industry challenges of Industry 4.0. Hershey: IGI Global, 2021. Str. 219-244. ISBN 978-1799-886-07-5. DOI: 10.4018/978-1-7998-8548-1.ch012. [COBISS.SI-ID 61692675]
18. FICKO, Mirko, BEGIĆ-HAJDAREVIĆ, Đerzija, COHODAR HUSIC, Maida, BERUS, Lucijano, ČEKIĆ, Ahmet, KLANČNIK, Simon. Prediction of surface roughness of an abrasive water jet cut using an artificial neural network. Materials. 5 June 2021, vol. 14, iss. 11, str. 1-16. ISSN 1996-1944. DOI: 10.3390/ma14113108. [COBISS.SI-ID 66209795]
19. FICKO, Mirko, BERUS, Lucijano, POTOČNIK, David. Tehnologija numerično krmiljenih stružnic z gnanimi orodji : univerzitetni učbenik. 1. izd. Maribor: Univerza v Mariboru, Univerzitetna založba, 2021. 1 spletni vir (1 datoteka PDF (V, 161 str.)), ilustr. ISBN 978-961-286-520-7. https://press.um.si/index.php/ump/catalog/view/613/807/1836-1, Digitalna knjižnica Univerze v Mariboru – DKUM, http://www.dlib.si/details/URN:NBN:SI:DOC-S0FD9KXM, DOI: 10.18690/978-961-286-520-7. [COBISS.SI-ID 77892355]

2022

20. MUHAMEDAGIC, Kenan, BERUS, Lucijano, POTOČNIK, David, ČEKIĆ, Ahmet, BEGIĆ-HAJDAREVIĆ, Đerzija, COHODAR HUSIC, Maida, FICKO, Mirko. Effect of process parameters on tensile strength of FDM printed carbon fiber reinforced polyamide parts. Applied sciences. June 2022, vol. 12, iss. 12 (6028), 19 str., ilustr. ISSN 2076-3417. DOI: 10.3390/app12126028. [COBISS.SI-ID 112573443]
21. BERUS, Lucijano, FICKO, Mirko. Sistem in metoda za ocenjevanje naleganja orodja za preoblikovanje pločevine. Maribor: Univerza v Mariboru, 2022. 11 str. [COBISS.SI-ID 138200579]
22. BERUS, Lucijano. Sistem za podporo postopka tuširanja orodij za globoki vlek : doktorska disertacija. Maribor: [L. Berus], 2022. X, 92 str., ilustr. Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 119314179]

2023

23. GOTLIH, Janez, KARNER, Timi, BELŠAK, Rok, FICKO, Mirko, BERUS, Lucijano, BRAJLIH, Tomaž, PAL, Snehashis, BREZOČNIK, Miran. Design and manufacturing of conformal cooling channels for injection molding: A review. V: KARABEGOVIĆ, Isak (ur.), KOVAČEVIĆ, Ahmed (ur.), MANDŽUKA, Sadko (ur.). New technologies, development and application VI : [International Conference New Technologies, Development and Application, Sarajevo, Bosnia and Herzegovina in Sarajevo, on 22nd-24th June 2023]. Vol 1. Cham: Springer Natur, cop. 2023. Vol. 687, str. 156-169. Lecture notes in networks and systems, Vol. 687. ISBN 978-3-031-31066-9, ISBN 978-3-031-31065-2. ISSN 2367-3370. DOI: 10.1007/978-3-031-31066-9_17. [COBISS.SI-ID 154554627]
projekt: P2-0157 Tehnološki sistemi za pametno proizvodnjo; financer: Slovenian Ministry of Higher Education, Science and Technology and the Slovenian Research Agency
24. BELŠAK, Rok, GOTLIH, Janez, BERUS, Lucijano, KARNER, Timi. Kinesthetic trajectory learning of a collaborative robot UR 10e with APLC S7-1500. V: KARABEGOVIĆ, Isak (ur.), KOVAČEVIĆ, Ahmed (ur.), MANDŽUKA, Sadko (ur.). New technologies, development and application VI : [International Conference New Technologies, Development and Application, Sarajevo, Bosnia and Herzegovina in Sarajevo, on 22nd-24th June 2023]. Vol 1. Cham: Springer Natur, cop. 2023. Vol. 687, str. 19-26. Lecture notes in networks and systems, Vol. 687. ISBN 978-3-031-31066-9, ISBN 978-3-031-31065-2. ISSN 2367-3370. DOI: 10.1007/978-3-031-31066-9_2. [COBISS.SI-ID 154491139]
25. BERUS, Lucijano, HERNAVS, Jernej, PERŠAK, Tadej, POTOČNIK, David, KLANČNIK, Simon, GOTLIH, Janez, KARNER, Timi, FICKO, Mirko. A new hybrid PSO-JAYA algorithm for function optimization. V: KARABEGOVIĆ, Isak (ur.), KOVAČEVIĆ, Ahmed (ur.), MANDŽUKA, Sadko (ur.). New technologies, development and application VI : [International Conference New Technologies, Development and Application, Sarajevo, Bosnia and Herzegovina in Sarajevo, on 22nd-24th June 2023]. Vol 1. Cham: Springer Natur, cop. 2023. Vol. 687, str. 62-68. Lecture notes in networks and systems, Vol. 687. ISBN 978-3-031-31066-9, ISBN 978-3-031-31065-2. ISSN 2367-3370. [COBISS.SI-ID 154512387]
26. BERUS, Lucijano, FICKO, Mirko. Sistem in metoda za ocenjevanje naleganja orodja za preoblikovanje pločevine : patent SI 26353 A, 2023-11-30. Ljubljana: Urad RS za intelektualno lastnino, 2023. [15] str. https://www2.uil-sipo.si/s/ds.dll/00?A=103018c0c00119d1df0000011400, https://worldwide.espacenet.com/patent/search/family/086378474/publication/SI26353A?q=pn%3DSI26353A. [COBISS.SI-ID 160682243]
patentna družina: P-202200075, 2022-05-12; EP4276749A1, 2023-11-15; SI26353A, 2023-11-30; 23172981.5, 2023-05-11

2024

27. BERUS, Lucijano, HERNAVS, Jernej, POTOČNIK, David, ŠKET, Kristijan, FICKO, Mirko. Enhancing manufacturing precision: Leveraging motor currents data of computer numerical control machines for geometrical accuracy prediction through machine learning. Sensors. Dec. 2024, vol. 25, iss. 1, [article no.] 169, 19 str. ISSN 1424-8220. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/s25010169. [COBISS.SI-ID 225665795]
projekt: This research was financially supported by the Slovenian Research and Innovation Agency by research core funding No. P2-0157 and research project L2-3167—cognitive geometrical control of machined forged parts based on big data from the manufacturing process. Additional technical and financial supporters were companies Marovt d.o.o. and Inkolteh d.o.o.
28. SKAKUN, Plavka, RAJNOVIĆ, Dragan, JANJATOVIC, Petar, MOVRIN, Dejan, DRAMIĆANIN, Miroslav D., BERUS, Lucijano, FICKO, Mirko. Experimental determination of a strain state in a bulk forming of a low carbon steel. Medžiagotyra. 2024, vol. 30, no. 1, str. 40-46, ilustr., graf. prikazi. ISSN 2029-7289. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.5755/j02.ms.34605. [COBISS.SI-ID 267805187]
projekt: This research has been supported by the Ministry of Science, Technological Development and Innovation through project no. 451-03-47/2023-01/200156 “Innovative scientific and artistic research from the Faculty of Technical Sciences, Novi Sad, Serbia, activity domain”.
29. PERŠAK, Tadej, HERNAVS, Jernej, BERUS, Lucijano, POTOČNIK, David, ŠKET, Kristijan, FICKO, Mirko, KLANČNIK, Simon. Napovedovanje oblike kaljenih kovinskih obdelovancev z globokimi nevronskimi mrežami. V: ŠVETAK, Darko (ur.). Vir znanja in izkušenj za stroko : 15. industrijski forum IRT 2024 : zbornik foruma : Portorož, 10. in 11. junij 2024. Škofljica: Profidtp, 2024. Str. 75-78, ilustr. ISBN 978-961-95800-4-2. https://www.forum-irt.si/o-forumu/arhiv-zbornikov/2024061317440620/zbornik-2024/. [COBISS.SI-ID 203473923]

2025

30. BERUS, Lucijano, PUNGERČAR, Vesna. Cultural Heritage analysis with YOLO based object detection. V: GORIŠEK, Maruša (ur.), GOLOB, Tea (ur.), ŠTREMPFEL, Teja (ur.). 16th International Conference on Information Technologies and Information Society : ITIS 2025 : conference proceedings : November 12-13, 2025, Otočec, Slovenia. 1st corrected ed. In Novo mesto: Faculty of Information Studies, 2025. Str. [217], ilustr. ISBN 978-961-96549-3-4. https://itis.fis.unm.si/wp-content/uploads/2026/03/ITIS-2025-Proceedings_FINAL-1.pdf, DiRROS - Digitalni repozitorij raziskovalnih organizacij Slovenije. [COBISS.SI-ID 265308675]
31. SIMONIČ, Marko, HERNAVS, Jernej, BERUS, Lucijano, POTOČNIK, David, PERŠAK, Tadej, KLANČNIK, Simon. Intelligent corn moisture prediction for continuous drying systems: a GRU time-series approach in the era of Industry 4.0. V: KARABEGOVIĆ, Isak (ur.), KOVAČEVIĆ, Ahmed (ur.), MANDŽUKA, Sadko (ur.). New Technologies, Development and Application VIII : Advanced Technologies in Mechanical Design, Materials, Robotics, Mechatronics, Production Technologies. Vol 1. Cham: Springer Nature, cop. 2025. Str. 433-443, ilustr. Lecture notes in networks and systems (Online), Vol. 1482. ISBN 978-3-031-95193-0, ISBN 978-3-031-95194-7. ISSN 2367-3370, ISSN 2367-3389. DOI: 10.1007/978-3-031-95194-7_44. [COBISS.SI-ID 242144259]
32. ŠKET, Kristijan, POTOČNIK, David, BERUS, Lucijano, HERNAVS, Jernej, FICKO, Mirko. Optimizing laser cutting of stainless steel using latin hypercube sampling and neural networks. Optics and laser technology. [Print ed.]. Apr. 2025, vol. 182, pt. b, [article no.] 112220, str. 1-10, ilustr. ISSN 0030-3992. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.1016/j.optlastec.2024.112220. [COBISS.SI-ID 220295427]
projekt: The authors acknowledge the financial support from the Slovenian Research and Innovation Agency (research core funding No. P2-0157).

2026

33. MEDVEŠEK, Matic, BERUS, Lucijano, TOPIĆ BOŽIČ, Jelena, MUHIČ, Simon. Integrating artificial intelligence with physics-based simulations : a review of methods and applications. V: Razvoj industrijskega inženiringa: priložnosti, potenciali in izzivi za zeleni prehod z uporabo umetne inteligence = Development of industrial engineering: opportunities, potentials and challenges for green transition through the use of artificial intelligence : zbornik recenziranih prispevkov 10. mednarodne znanstvene konference = proceedings of reviewed papers of 10th International Scientific Conference : Novo mesto, 14. maj 2026. Novo mesto: Fakulteta za industrijski inženiring: = Faculty of Industrial Engineering, 2026. Str. 72-76, ilustr. ISBN 978-961-7097-15-3. [COBISS.SI-ID 278639107]
Izbrani format bibliografske enote: ISO 690
Razvrščanje bibliografskih enot: leto - naraščajoče, naslov

Vir bibliografskih zapisov: vzajemna baza podatkov COBISS.SI/COBIB.SI, 30. 9. 2026