Zdenko Tonković

1. TONKOVIĆ, Zdenko (urednik), ALIABADI, M. H. (urednik), 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September 19-21, 2011, Dubrovnik, Croatia. Advances in fracture and damage mechanics X : selected, peer reviewed papers from the 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September 19-21, 2011, Dubrovnik, Croatia. Zurich: Trans Tech Publications, 2011, cop. 2012. XX, 816 str., ilustr. Key engineering materials, Vols. 488-489, 2012. ISBN 978-3-03785-218-7. ISSN 1013-9826. DOI: 10.4028/www.scientific.net/KEM.488-489. [COBISS.SI-ID 15361046]

2. SKOZRIT, Ivica. Numeričko modeliranje pukotina u metalnim i polimernim materijalima : doktorski rad. Zagreb: [I. Skozrit], 2011. XLII, 193 str., ilustr. [COBISS.SI-ID 19275798]

3. KRSTULOVIĆ-OPARA, Lovre, SURJAK, Martin, VESENJAK, Matej, TONKOVIĆ, Zdenko, KODVANJ, Janos, DOMAZET, Željko. Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials. V: Danubia-Adria : proceedings. 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, September 24-27, 2014 - Kempten (Allgäu), Germany. Düsseldorf: VDI - Verein Deutscher Ingenieure, 2014. Str. 232-233, ilustr. ISBN 978-3-00-046740-0. [COBISS.SI-ID 18307606]

4. FRANČESKI, Joško, TONKOVIĆ, Zdenko, SKOZRIT, Ivica, SURJAK, Martin, KRSTULOVIĆ-OPARA, Lovre, VESENJAK, Matej, KODVANJ, Janos, DOMAZET, Željko. Validacija numeričkog modela primjenom metoda digitalne korelacije slike I termografije. V: JELENIĆ, Gordan (ur.), GAĆEŠA, Maja (ur.). Zbornik radova Šestoga susreta Hrvatskoga društva za mehaniku, Rijeka, 29.-30. svibnja 2014. Rijeka: Hrvatsko društvo za mehaniku, 2014. Str. 61-66. ISBN 978-953-7539-19-1. [COBISS.SI-ID 18282006]

5. KRSTULOVIĆ-OPARA, Lovre, SURJAK, Martin, VESENJAK, Matej, TONKOVIĆ, Zdenko, KODVANJ, Janos, DOMAZET, Željko. Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials. Infrared physics & technology. [Print ed.]. November 2015, vol. 73, str. 166-174, ilustr. ISSN 1350-4495. DOI: 10.1016/j.infrared.2015.09.014. [COBISS.SI-ID 18988054]

6. SKOZRIT, Ivica, TONKOVIĆ, Zdenko, KRSTULOVIĆ-OPARA, Lovre, SURJAK, Martin, VESENJAK, Matej, ČANŽAR, Predrag. Damage initiation and evolution in nodular cast iron for wind turbine components. V: KOŽAR, Ivica (ur.). Proceedings : organized by Croatian Society of Mechanics under the auspices of Central European Association for Computational Mechanics University of Rijeka. 8th International Congress of Croatian Society of Mechanics, Opatija, Croatia, september 29-October 2, 2015. Zagreb: Croatian Society of Mechanics, cop. 2015. Str. 91. ISBN 978-953-7539-20-7. [COBISS.SI-ID 19007254]

7. KRSTULOVIĆ-OPARA, Lovre, SURJAK, Martin, VESENJAK, Matej, TONKOVIĆ, Zdenko, FRANČESKI, Joško, KODVANJ, Janos, DOMAZET, Željko. Determination of material properties using dynamic tests supported by thermograpy, digital image correlation and numerical simulation. V: KOŽAR, Ivica (ur.). Proceedings : organized by Croatian Society of Mechanics under the auspices of Central European Association for Computational Mechanics University of Rijeka. 8th International Congress of Croatian Society of Mechanics, Opatija, Croatia, september 29-October 2, 2015. Zagreb: Croatian Society of Mechanics, cop. 2015. Str. 1-8, ilustr. ISBN 978-953-7539-20-7. [COBISS.SI-ID 19005974]

8. SKOZRIT, Ivica, FRANČESKI, Joško, TONKOVIĆ, Zdenko, SURJAK, Martin, KRSTULOVIĆ-OPARA, Lovre, VESENJAK, Matej, KODVANJ, Janos, GUNJEVIĆ, Bojan, LONČARIĆ, Damir. Validation of numerical model by means of digital image correlation and thermography. V: PAPUGA, Jan (ur.), RŮŽIČKA, Milan (ur.). VAL 2015. 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, 23-26 March, 2015, Czech Republic, Prague. [S.l.]: Elsevier, 2015. Vol. 101, str. 450-458, ilustr. Procedia engineering, Vol. 101. ISSN 1877-7058. http://ac.els-cdn.com/S1877705815006529/1-s2.0-S1877705815006529-main.pdf?_tid=e7f45844-e1b4-11e4-b765-00000aab0f02&acdnat=1428912963_c6d48cd5645fdf906a775712546ffa7a. [COBISS.SI-ID 18605846]

9. BAJIĆ, Darko (urednik), TONKOVIĆ, Zdenko (urednik), ALIABADI, M. H. (urednik), 14th International Conference on Fracture and Damage Mechanics (FDM 2015), September 21-23, 2015, Budva, Montenegro. Advances in fracture and damage mechanics XIV : selected, peer reviewed papers from the 14th International Conference on Fracture and Damage Mechanics (FDM 2015), September 21-23, 2015, Budva, Montenegro. Zurich: Trans Tech Publications, cop. 2016. XIII, 295 str., ilustr. Key engineering materials, Vol. 665. ISBN 978-3-03835-541-0. ISSN 1013-9826. [COBISS.SI-ID 19041558]

10. SKOZRIT, Ivica, ČANŽAR, Predrag, TONKOVIĆ, Zdenko, KRSTULOVIĆ-OPARA, Lovre, SURJAK, Martin, VESENJAK, Matej, SORIĆ, Jurica. Damage initiation and evolution in nodular cast iron for wind turbine components : lecture at the Special workshop in scope of the project Multiscale numerical modeling of material deformation responses from macro- to nanolevel, Zagreb, May 9, 2016. [COBISS.SI-ID 19542038]

11. PERIĆ, Mato, GARAŠIĆ, Ivica, TONKOVIĆ, Zdenko, VUHERER, Tomaž, NIŽETIĆ, Sandro, DEDIĆ-JANDREK, Hrvoje. Numerical prediction and experimental validation of temperature and residual stress distributions in buried-arc welded thick plates. International journal of energy research. June 2019, vol. 43, iss. 8, str. 3590-3600. ISSN 0363-907X. DOI: 10.1002/er.4506. [COBISS.SI-ID 22456854]

12. PERIĆ, Mato, NIŽETIĆ, Sandro, GARAŠIĆ, Ivica, GUBELJAK, Nenad, VUHERER, Tomaž, TONKOVIĆ, Zdenko. Numerical calculation and experimental measurement of temperatures and welding residual stresses in a thick-walled T-joint structure. Journal of thermal analysis and calorimetry. [Print ed.]. Jan. 2020, vol. 141, str. 313-322, ilustr. ISSN 1388-6150. DOI: 10.1007/s10973-019-09231-3. [COBISS.SI-ID 22921494]

13. SKOZRIT, Ivica (urednik), SORIĆ, Jurica (urednik), TONKOVIĆ, Zdenko (urednik). 10th ICCSM : book of abstracts of the 10th International Congress of Croatian Society of Mechanics : Pula, Croatia, September 28 – 30, 2022. Zagreb [etc.]: CSM, 2022. XXII, 297 str., ilustr. Book of abstracts (International Congress of Croatian Society of Mechanics). ISSN 2584-7716. [COBISS.SI-ID 125596675]

14. SKOZRIT, Ivica (urednik), SORIĆ, Jurica (urednik), TONKOVIĆ, Zdenko (urednik). 10th ICCSM : proceedings of the 10th International Congress of Croatian Society of Mechanics : Pula, Croatia, September 28 – 30, 2022. Zagreb [etc.]: CSM, 2022. 1 USB ključ (1 datoteka PDF (297 str.)), ilustr. Proceedings of the ... International Congress of Croatian Society of Mechanics (USB). ISSN 2623-6133. [COBISS.SI-ID 123907843]

15. ČULAR, Ivan, VUČKOVIĆ, Krešimir, GLODEŽ, Srečko, TONKOVIĆ, Zdenko. Computational model for bending fatigue prediction of surface hardened spur gears based on the multilayer method. International journal of fatigue. Aug. 2022, vol. 161 (106892), 16 str. ISSN 0142-1123. DOI: 10.1016/j.ijfatigue.2022.106892. [COBISS.SI-ID 104392195]

16. NEČEMER, Branko, TONKOVIĆ, Zdenko, VUHERER, Tomaž, GLODEŽ, Srečko. Computational modelling of fatigue behaviour by using the inelastic energy approach. V: SKOZRIT, Ivica (ur.), SORIĆ, Jurica (ur.), TONKOVIĆ, Zdenko (ur.). 10th ICCSM : book of abstracts of the 10th International Congress of Croatian Society of Mechanics : Pula, Croatia, September 28 – 30, 2022. Zagreb [etc.]: CSM, 2022. Str. 205-206, ilustr. Book of abstracts (International Congress of Croatian Society of Mechanics). ISSN 2584-7716. [COBISS.SI-ID 125945859]

17. TOMIĆ, Zoran, GUBELJAK, Nenad, JARAK, Tomislav, FERLIČ, Luka, TONKOVIĆ, Zdenko. Effect of different porosity of sintered steel on fatigue S-N curves. V: SKOZRIT, Ivica (ur.), SORIĆ, Jurica (ur.), TONKOVIĆ, Zdenko (ur.). 10th ICCSM : book of abstracts of the 10th International Congress of Croatian Society of Mechanics : Pula, Croatia, September 28 – 30, 2022. Zagreb [etc.]: CSM, 2022. Str. 263-264, ilustr. Book of abstracts (International Congress of Croatian Society of Mechanics). ISSN 2584-7716. [COBISS.SI-ID 125966339]

18. NEČEMER, Branko, VUHERER, Tomaž, TONKOVIĆ, Zdenko, GLODEŽ, Srečko. Experimental and computational investigation of fatigue crack propagation using the inelastic energy approach. Theoretical and applied fracture mechanics. [Print ed.]. June 2022, vol. 119 (103362), 9 str. ISSN 0167-8442. DOI: 10.1016/j.tafmec.2022.103362. [COBISS.SI-ID 106544643]

19. TOMIĆ, Zoran, GUBELJAK, Nenad, JARAK, Tomislav, POLANČEC, Tomislav, TONKOVIĆ, Zdenko. Micro - and macromechanical properties of sintered steel with different porosity. Scripta materialia. Aug. 2022, vol. 217, 5 str., ilustr. ISSN 1359-6462. DOI: 10.1016/j.scriptamat.2022.114787. [COBISS.SI-ID 107279363]

20. PERIĆ, Mato, GARAŠIĆ, Ivica, GUBELJAK, Nenad, TONKOVIĆ, Zdenko, NIŽETIĆ, Sandro, OSMAN, Krešimir. Numerical simulation and experimental measurement of residual stresses in a thick-walled buried-arc welded pipe structure. Metals. June 2022, vol. 12, iss. 7 (1102), str. 1-14, ilustr. ISSN 2075-4701. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/met12071102. [COBISS.SI-ID 119786499]

21. LESIČAR, Tomislav, TONKOVIĆ, Zdenko, GLODEŽ, Srečko. Phase field modelling of material fatigue. V: SKOZRIT, Ivica (ur.), SORIĆ, Jurica (ur.), TONKOVIĆ, Zdenko (ur.). 10th ICCSM : book of abstracts of the 10th International Congress of Croatian Society of Mechanics : Pula, Croatia, September 28 – 30, 2022. Zagreb [etc.]: CSM, 2022. Str. 185-186, ilustr. Book of abstracts (International Congress of Croatian Society of Mechanics). ISSN 2584-7716. [COBISS.SI-ID 125942787]

22. TOMIĆ, Zoran, JARAK, Tomislav, LESIČAR, Tomislav, GUBELJAK, Nenad, TONKOVIĆ, Zdenko. Modelling of fatigue microfracture in porous sintered steel using a phase-field method. Materials. June 2023, vol. 16, iss. 11, [article no.] 4174, 22 str., ilustr. ISSN 1996-1944. Digitalna knjižnica Univerze v Mariboru – DKUM, DOI: 10.3390/ma16114174. [COBISS.SI-ID 154724355]
projekt: This work was fully supported by the Croatian Science Foundation under the project “Multiscale Numerical Modelling and Experimental Investigation of Aging Processes in Sintered Structural Components” (MultiSintAge, PZS-1 2019-02-4177).

23. POLANČEC, Tomislav, LESIČAR, Tomislav, TONKOVIĆ, Zdenko, GLODEŽ, Srečko. Modelling of rolling-contact fatigue pitting phenomena by phase field method. Wear. [Online ed.]. 15 November 2023, vol. 532-533, [article no.] 205068, 11 str., ilustr. ISSN 1873-2577. DOI: 10.1016/j.wear.2023.205068. [COBISS.SI-ID 165369603]