John. W. Hancock

1. HANCOCK, John. W. (urednik). Second Symposium on Herbicides in British Fruit Growing : papers presented at a meeting held on 13th March, 1973 at the Mount Royal Hotel, Marble Arch, London. London: British Crop Protection Council. IV, 97 str., tabele, graf. prikazi. Monograph (British Crop Protection Council), 7. ISSN 0306-3941. [COBISS.SI-ID 3092328]

2. BEZENŠEK, Boštjan. Elastic-plastic crack problems in the ductile-brittle transition : a thesis submitted for the degree of Doctor of Philosophy (Ph.D.) to the Department of Mechanical Engineering, Faculty of Engineering, University of Glasgow. Glasgow: [B. Bezenšek], October 2003. XXX, 182 f., ilustr. [COBISS.SI-ID 8506390]

3. BEZENŠEK, Boštjan, HANCOCK, John. W. Increased temperature margins due to constraint loss. V: LAM, Poh-Sang (ur.). Application of fracture mechanics in failure assessment - 2003 -. The 2003 ASME Pressure Vessel and Piping Conference, Cleveland, Ohio, July 20-24, 2003. New York: The American Society of Mechanical Engineers, cop. 2003. Str. 49-56, pvp2003-2007. PVP, Vol. 462. ISBN 0-7918-4153-7. [COBISS.SI-ID 8102678]

4. BEZENŠEK, Boštjan, HANCOCK, John. W. Fracture toughness and crack path deviations in laser welded joints. V: LAM, Poh-Sang (ur.). Fracture methodologies and manufacturing processes : PVP-Vol. 474. The 2004 ASME/JSME Pressure Vessels and Piping Conference, San Diego, California, USA, July 25-29, 2004. New York: The American Society of Mechanical Engineers, 2004. Str. 9-15, pvp2004-2295. PVP, Vol. 474. ISBN 0-7918-4669-5. [COBISS.SI-ID 8935190]

5. BEZENŠEK, Boštjan, LI, J., HANCOCK, John. W. Homogeneous and interfacial crack tip fields unified by constraint. V: ICEFA-I 2004 : programme and abstracts. [Amsterdam]: Elsevier, 2004. Str. p1.31. [COBISS.SI-ID 8917014]

6. BEZENŠEK, Boštjan, HANCOCK, John. W. Mode I and mixed mode I/II crack tip fields unified by constraint. V: Advanced fracture mechanics for life and safety assessments : proceedings. The 15th Europen Conference of Fracture ECF 15, August 11-13, 2004, Stockholm, Sweden. [S.l.: s.n.], 2004. 8 f. [COBISS.SI-ID 8936982]

7. BEZENŠEK, Boštjan, HANCOCK, John. W. The re-characterisation of complex defects. Part I, Fatigue and ductile tearing. Engineering fracture mechanics. [Print ed.]. 2004, vol. 71, issue 7/8, str. 1001-1020. ISSN 0013-7944. http://dx.doi.org/10.1016/S0013-7944(03)00155-3, Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 8460822]

8. BEZENŠEK, Boštjan, HANCOCK, John. W. The re-characterisation of complex defects. Part II, Cleavage. Engineering fracture mechanics. [Print ed.]. 2004, vol. 71, issue 7/8, str. 1021-1039. ISSN 0013-7944. http://dx.doi.org/10.1016/S0013-7944(03)00156-5, Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID 8461078]

9. BEZENŠEK, Boštjan, FLAŠKER, Jože, HANCOCK, John. W. Statistični model krhkega loma nehomogenih materialov. V: KORELC, Jože (ur.), ZUPAN, Dejan (ur.). Zbornik del. Kuhljevi dnevi 2004, Otočec, 30. september - 1. oktober 2004. Ljubljana: Slovensko društvo za mehaniko, 2004. Str. 25-33. ISBN 961-90000-9-9. [COBISS.SI-ID 9064470]

10. BEZENŠEK, Boštjan, REN, Zoran, FLAŠKER, Jože, HANCOCK, John. W. Eksperimentalno ovrednotenje novega statističnega modela krhkega loma nehomogenih materialov. V: KORELC, Jože (ur.), ZUPAN, Dejan (ur.). Zbornik del. Kuhljevi dnevi 2005, Podčetrtek, 22.-23. september 2005. Ljubljana: Slovensko društvo za mehaniko, 2005. Str. 25-31. ISBN 961-91659-0-X. [COBISS.SI-ID 9903894]

11. BEZENŠEK, Boštjan, HANCOCK, John. W. Increased temperature margins due to constraint loss. Journal of pressure vessel technology : Transactions of the ASME. May 2005, vol. 127, no. 2, str. 173-178. ISSN 0094-9930. [COBISS.SI-ID 9762326]

12. BEZENŠEK, Boštjan, BANERJEE, Anuradha, HANCOCK, John. W., 2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado, USA. A statistical model for brittle fracture of functionally graded materials. V: Proceedings of PVP2005. 2005 ASME Pressure vessels and piping conference, July 17-21, 2005, Denver, Colorado, USA. [S.l.]: ASME, 2005. Str. pvp2005-71152/1-7. ISBN 0-7918-3763-7. [COBISS.SI-ID 9763350]