COBISS Kooperativni online bibliografski sistem in servisi COBISS
Aljaž Pogačnik
Osebna bibliografija za obdobje 2009-2025
2009
1.
POGAČNIK, Aljaž. Analiza pogonskega sklopa za novo generacijo avtomobilskih luči = [Analysis of an
actuator for a new generation of car headlamps] : diplomska naloga. Ljubljana: [A. Pogačnik], 2009. 80 f., barvne ilustr. [COBISS.SI-ID 11082011]
2010
2.
POGAČNIK, Aljaž, KALIN, Mitjan. Plastični materiali za zobnike. V: VIŽINTIN, Jože
(ur.), VELKAVRH, Igor (ur.), PODGORNIK, Bojan (ur.). Zbornik predavanj Posvetovanja o tribologiji, mazivih in alternativnih gorivih = Proceedings
of the Conference on Tribology, Lubricants and Alternative Fuels. Ljubljana: Slovensko društvo za tribologijo: = Slovenian Society for Tribology,
2010. Str. 203-211, ilustr. ISBN 978-961-92950-0-7. [COBISS.SI-ID 11654171]
2011
3.
POGAČNIK, Aljaž, KALIN, Mitjan. The running in phase of polymer materials for gears.
V: FRANEK, Friedrich (ur.), VIŽINTIN, Jože (ur.). ECOTRIB 2011 : proceedings. Wien: The Austrian Tribology Society: = Österreichische Tribologische Gesellschaft,
2011. Str. 701-702. ISBN 978-3-901657-38-2. [COBISS.SI-ID 11862811]
4.
POGAČNIK, Aljaž, KALIN, Mitjan, TAVČAR, Jože. Testiranje ustreznosti plastičnih materialov
za zobniške dvojice. V: PERME, Tomaž (ur.), ŠVETAK, Darko (ur.). Vir znanja in izkušenj za stroko : zbornik foruma. Industrijski forum IRT, Portorož, 6. in 7. junij 2011. Škofljica: Profidtp, 2011.
Str. 181-186, ilustr. ISBN 978-961-92659-2-5. [COBISS.SI-ID 11906587]
5.
POGAČNIK, Aljaž, KALIN, Mitjan. Tribological characterization of plastic materials
for gears. V: GOLOBIČ, Iztok (ur.), CIMERMAN, Franc (ur.). Development and implementation of enhanced technologies 2011 : proceedings of the
3rd AMES International Conference, Ljubljana, Slovenia, November 29th-30th, 2011. 1st ed. Ljubljana: Association of Mechanical Engineers of Slovenia - AMES, 2011.
Str. 166-175. ISBN 978-961-91393-7-0. [COBISS.SI-ID 12105243]
2012
6.
POGAČNIK, Aljaž, KALIN, Mitjan. How to determine surface asperities for real contact
area calculations using deterministic approach. V: Great challenges in tribology. Leeds-Lyon Symposium on Tribology, 4th-7th September 2012, Leeds. Leeds: Trinity
University College, 2012. Str. [62]. [COBISS.SI-ID 12434203]
7.
POGAČNIK, Aljaž, KALIN, Mitjan. Identifikacija vršičkov na površini za izračun realne
kontaktne površine. V: VIŽINTIN, Jože (ur.), SEDLAČEK, Marko (ur.). Zbornik predavanj Posvetovanja o tribologiji, hladilno mazalnih sredstvih in tehnični
diagnostiki = Proceedings of the Conference on Tribology, Coolants and Technical Diagnostics. Posvetovanje o tribologiji, hladilno mazalnih sredstvih in tehnični diagnostiki
= Conference on Tribology, Metal Working Fluids and Technical Diagnostics [tudi] SLOTRIB
2012, Ljubljana, Slovenija, 15. november 2012. Ljubljana: Slovensko društvo za tribologijo:
= Slovenian Society for Tribology, 2012. Str. 121-128, ilustr. ISBN 978-961-92950-2-1.
[COBISS.SI-ID 12560923]
8.
POGAČNIK, Aljaž, POŽAR, Tomaž, MOŽINA, Janez, KALIN, Mitjan. Merjenje kolektivne deformacije
mikro-vršičkov s homodinskim kvadraturnim laserskim interferometrom. V: VIŽINTIN,
Jože (ur.), SEDLAČEK, Marko (ur.). Zbornik predavanj Posvetovanja o tribologiji, hladilno mazalnih sredstvih in tehnični
diagnostiki = Proceedings of the Conference on Tribology, Coolants and Technical Diagnostics. Posvetovanje o tribologiji, hladilno mazalnih sredstvih in tehnični diagnostiki
= Conference on Tribology, Metal Working Fluids and Technical Diagnostics [tudi] SLOTRIB
2012, Ljubljana, Slovenija, 15. november 2012. Ljubljana: Slovensko društvo za tribologijo:
= Slovenian Society for Tribology, 2012. Str. 273. ISBN 978-961-92950-2-1. [COBISS.SI-ID
12562971]
9.
POGAČNIK, Aljaž, KALIN, Mitjan. Parameters influencing the running-in and long-term
tribological behaviour of polyamide (PA) against polyacetal (POM) and steel. Wear. [Print ed.]. 2012, vol. 290-291, str. 140-148, ilustr. ISSN 0043-1648. DOI: 10.1016/j.wear.2012.04.017. [COBISS.SI-ID 12348699]
2013
10.
KALIN, Mitjan, POGAČNIK, Aljaž. Criteria and properties of the asperity peaks on 3D
engineering surfaces. Wear. [Print ed.]. Nov. 2013, vol. 308, iss. 1/2, str. 95-104, ilustr. ISSN 0043-1648.
DOI: 10.1016/j.wear.2013.09.010. [COBISS.SI-ID 13208603]
11.
POGAČNIK, Aljaž, TAVČAR, Jože. The effect of speed and torque on the lifetime of injection
moulded polymer gears. V: International Conference on Gears, October 7th to 9th, 2013, Garching (near Munich),
Germany : Europe invites the world. Düsseldorf: VDI-Verlag, cop. 2013. Str. 1189-1198, ilustr. VDI-Berichte, 2199. ISBN
978-3-18-092199-0. ISSN 0083-5560. [COBISS.SI-ID 13172763]
12.
POGAČNIK, Aljaž, POŽAR, Tomaž, KALIN, Mitjan, MOŽINA, Janez. A homodyne quadrature
laser interferometer for micro-asperity deformation analysis. Sensors. 2013, vol. 13, iss. 1, str. 703-720, ilustr. ISSN 1424-8220. Repozitorij Univerze v Ljubljani – RUL, DOI: 10.3390/s130100703. [COBISS.SI-ID 12590619]
13.
POGAČNIK, Aljaž, KALIN, Mitjan. How to determine the number of asperity peaks, their
radii and their heights for engineering surfaces : a critical appraisal. Wear. [Print ed.]. 2013, vol. 300, iss. 1/2, str. 143-154, ilustr. ISSN 0043-1648. DOI:
10.1016/j.wear.2013.01.105. [COBISS.SI-ID 12768795]
14.
POGAČNIK, Aljaž. Vpliv fizikalnih parametrov na tribološke lastnosti polimerov za zobnike : doktorsko
delo. Ljubljana: [A. Pogačnik], 2013. [8],129 str., ilustr. [COBISS.SI-ID 13191195]
2014
15.
TAVČAR, Jože, POGAČNIK, Aljaž. Lifetime testing of polymer gears. V: Polytrib 2014 : proceeding. 1st International Conference on Polymer Tribology, 11th - 12th September 2014, Bled,
Slovenia. Ljubljana: Slovenian Society for Tribology, 2014. Datoteka session i,3_pogacnik_lifetime
testing of polymer gears.pdf (2 f.), ilustr. [COBISS.SI-ID 13687835]
16.
ŠKOFIC, Jan, POGAČNIK, Aljaž. Measurement of transmission error on polymer gears.
V: Polytrib 2014 : proceeding. 1st International Conference on Polymer Tribology, 11th - 12th September 2014, Bled,
Slovenia. Ljubljana: Slovenian Society for Tribology, 2014. Datoteka posters/2_skofic_measurement
of transmission error on polymer gears.pdf (2 f.), ilustr. [COBISS.SI-ID 13692187]
17.
KALIN, Mitjan, POGAČNIK, Aljaž. PolyTrib 2014. IRT 3000 : inovacije, razvoj, tehnologije. okt. 2014, letn. 9, št. 5, str. 12, ilustr. ISSN 1854-3669. [COBISS.SI-ID 13762331]
18.
POGAČNIK, Aljaž, KALIN, Mitjan. Tribological properties of polymers for gears. V:
Polytrib 2014 : proceeding. 1st International Conference on Polymer Tribology, 11th - 12th September 2014, Bled,
Slovenia. Ljubljana: Slovenian Society for Tribology, 2014. Datoteka posters/3_pogacnik_tribological
characterization of plastic materials for gears.pdf (1 f.), ilustr. [COBISS.SI-ID
13692443]
19.
POGAČNIK, Aljaž, KALIN, Mitjan. Wear maps for PA, POM and steel material combinations.
V: Polytrib 2014 : proceeding. 1st International Conference on Polymer Tribology, 11th - 12th September 2014, Bled,
Slovenia. Ljubljana: Slovenian Society for Tribology, 2014. Datoteka session v/4_pogacnik_wear
maps for pa, pom and steel material combinations.pdf (2 f.), ilustr. [COBISS.SI-ID
13690907]
2015
20.
POGAČNIK, Aljaž, TAVČAR, Jože. An accelerated multilevel test and design procedure
for polymer gears. Materials & design. Jan. 2015, vol. 65, str. 961-973, ilustr. ISSN 0264-1275. DOI: 10.1016/j.matdes.2014.10.016. [COBISS.SI-ID 13733915]
21.
POGAČNIK, Aljaž, TAVČAR, Jože. Accelerated testing method for polymer gears : review
of gear body temperature calculation according to VDI 2736. V: International Conference on Gears 2015 [and] International Conference on High Performance
Plastic Gears 2015 [and] International Conference on Gear Production 2015, October
5th to 7th, 2015, Garching/Munich, Germany : Europe invites the world. Düsseldorf: VDI, 2015. Zv. 2, str. 1283-1294, ilustr. VDI-Berichte, 2255. ISBN 978-3-18-092255-3.
ISSN 0083-5560. [COBISS.SI-ID 14243867]
22.
POGAČNIK, Aljaž, KALIN, Mitjan. Evaluating tribological properties of polymer materials
for gears in tribological and gear tests. V: GOLOBIČ, Iztok (ur.), CIMERMAN, Franc
(ur.). Engineering - development and innovations for new employments 2014 : proceedings of
the 4th AMES International Conference, Ljubljana, Slovenia, October 23th, 2014. 1st ed. Ljubljana: Association of Mechanical Engineers of Slovenia - AMES, 2015.
Str. 125-134, ilustr. ISBN 978-961-91393-8-7. [COBISS.SI-ID 14133787]
2016
23.
POGAČNIK, Aljaž, TAVČAR, Jože. Accelerated testing and temperature calculation of
plastic gears. Gear solutions. [Online ed.]. Dec. 2016, f. 34-40, ilustr. ISSN 1933-7507. http://www.gearsolutions.com/media/uploads/assets/Digital_Editions/201612/1216-KISSsoft.pdf. [COBISS.SI-ID 15209243]
24.
KALIN, Mitjan, POGAČNIK, Aljaž, ETSION, I., RAEYMAEKERS, Bart. Comparing surface topography
parameters of rough surfaces obtained with spectral moments and deterministic methods.
Tribology international. Jan. 2016, vol. 93, pt. a, str. 137-141, ilustr. ISSN 0301-679X. https://www.sciencedirect.com/science/article/pii/S0301679X15004156?via%3Dihub, Repozitorij Univerze v Ljubljani – RUL, DOI: 10.1016/j.triboint.2015.09.013. [COBISS.SI-ID 14288923]
25.
POGAČNIK, Aljaž. Vpliv fizikalnih parametrov na tribološke lastnosti polimerov za zobnike. Ponatis doktorskega dela. Ljubljana: Fakulteta za strojništvo, Laboratorij za tribologijo
in površinsko nanotehnologijo, 2016. XV, 131 str., ilustr. ISBN 978-961-6536-92-9.
[COBISS.SI-ID 284722432]
2017
26.
KUPEC, Alja, POGAČNIK, Aljaž, KALIN, Mitjan. The Influence of contact configuration
on tribological properties of polyamide (PA6). V: ECOTRIB 2017. 6th European COnference on TRIBology, 7th-9th June 2017, Ljubljana, Slovenia. Ljubljana:
Slovenian society for tribology & TINT, 2017. Pdf datoteka (1 f.). [COBISS.SI-ID 15588635]
27.
KUPEC, Alja, POGAČNIK, Aljaž, KALIN, Mitjan. Tribological properties of polyacetal
(POM): the influence of contact configuration. V: ECOTRIB 2017. 6th European COnference on TRIBology, 7th-9th June 2017, Ljubljana, Slovenia. Ljubljana:
Slovenian society for tribology & TINT, 2017. Pdf datoteka (1 f.). [COBISS.SI-ID 15588891]
28.
POGAČNIK, Aljaž, KUPEC, Alja, KALIN, Mitjan. Tribological properties of polyamide
(PA6) in self-mated contacts and against steel as a stationary and moving body. Wear. [Print ed.]. May 2017, vol. 378/379, str. 17-26, ilustr. ISSN 0043-1648. http://www.sciencedirect.com/science/article/pii/S0043164817302752, Repozitorij Univerze v Ljubljani – RUL, DOI: 10.1016/j.wear.2017.01.118. [COBISS.SI-ID 15439643]
2019
29.
MATKOVIČ, Sebastjan, POGAČNIK, Aljaž, KALIN, Mitjan. Comparison between VDI 2736 wear
calculation and experimentally obtained results. V: International Conference on Gears 2019. 3rd International Conference on High Performance Plastic Gears 2019 [and] 3rd International
Conference on Gear Production 2019, Garching/Munich, Germany, September 18 - 20, 2019.
Düsseldorf: VDI, cop. 2019. F. 1311-1321, ilustr. VDI-Berichte, Nr. 2355. ISBN 978-3-18-092355-0.
ISSN 0083-5560. https://drive.google.com/file/d/1dVGooc75nrUEoaBBbh0beSKXc-g9ZrPh/view. [COBISS.SI-ID 16800027]
2021
30.
MATKOVIČ, Sebastjan, POGAČNIK, Aljaž, KALIN, Mitjan. Wear-coefficient analyses for
polymer-gear life-time predictions : a critical appraisal of methodologies. Wear. [Print ed.]. 15. Sep. 2021, vol. 480/481, str. 1-12, ilustr. ISSN 0043-1648. https://www.sciencedirect.com/science/article/pii/S0043164821003331?via%3Dihub#ack0010, DOI: 10.1016/j.wear.2021.203944. [COBISS.SI-ID 65400067]
2022
31.
MATKOVIČ, Sebastjan, KALIN, Mitjan, POGAČNIK, Aljaž. Dimensional stability of moulded
polymer gears under various environmental conditions. V: International conference on gears 2022. International conference on gears 2022, 4th International Conference on High Performance
Plastic Gears 2022, 4th International Conference on Gear Production 2022, Garching/Munich,
Germany, September 12-14, 2022. Düsseldorf: VDI, 2022. Str. 1061-1070, ilustr. VDI-Berichte,
2389. ISBN 978-3-18-092389-5, ISBN 978-3-18-102389-1. ISSN 0083-5560. [COBISS.SI-ID
123974915]
32.
MATKOVIČ, Sebastjan, KALIN, Mitjan, POGAČNIK, Aljaž. Primerjava modelnih triboloških
preizkusov in preizkusov opravljenih na realni zobniški dvojici polimer-jeklo. V:
SLOTRIB 2022 : Posvetovanje o tribologiji, mazivih in zelenih tehnologijah, 7. junij
2022, Portorož. [Ljubljana]: Slovensko društvo za tribologijo, 2022. Str. 1, ilustr. [COBISS.SI-ID
111529731]
2023
33.
SIDDIQUI, M. Shoaib Naseem, POGAČNIK, Aljaž, KALIN, Mitjan. Influence of load, sliding
speed and heat-sink volume on the tribological behaviour of polyoxymethylene (POM)
sliding against steel. Tribology international. Feb. 2023, vol. 178, pt. a, str. 1-12, ilustr. ISSN 0301-679X. https://www.sciencedirect.com/science/article/pii/S0301679X22006004, Repozitorij Univerze v Ljubljani – RUL, DOI: 10.1016/j.triboint.2022.108029. [COBISS.SI-ID 129358083]