Boštjan Bezenšek

1. BEZENŠEK, Boštjan. Flaw recharacterisation : a presentation delivered at the Euromech/ESIS conference at the University of Reading on March 23rd 2000. Reading, 2000. [COBISS.SI-ID 6443798]

2. BEZENŠEK, Boštjan. A numerical and experimental study of constraint and stability effects in the assessment of coplanar flaws under elastic-plastic conditions : diploma work. Glasgow: [B. Bezensek], 2000. XVII, 109 f., graf. prikazi. [COBISS.SI-ID 5950230]

3. BEZENŠEK, Boštjan. Recharacterisation of complex defects : a presentation delivered at the British Energy Generation on March 13th 2000 [Glasgow]. Glasgow, 2000. [COBISS.SI-ID 6444054]

4. BEZENŠEK, Boštjan, HANCOCK, John W. Brittle fracture from interacting surface breaking defects. In: LIDBURY, David P. G. (ed.), SCARTH, Douglas Arthur (ed.). Fracture and fitness : presented at the 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 23-26, 2001. The 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 23-26, 2001. New York, N.Y.: American Society of Mechanical Engineers, cop. 2001. Str. 25-31. PVP, Vol. 423. ISBN 0-7918-1678-8. [COBISS.SI-ID 7072022]

5. BEZENŠEK, Boštjan, HANCOCK, J. W. Ductile tearing from interacting surface breaking defects. In: RAVI-CHANDLAR, K... (ed.), et al. Advances in fracture research : proceedings of ICF10, Honolulu 2001. Advances in fracture research, proceedings of ICF10, Honolulu 2001. Oxford: Pergamon: Elsevier Science, 2001. 6 str. ISBN 0-08-0440-428. [COBISS.SI-ID 6916886]

6. BEZENŠEK, Boštjan, HANCOCK, John W. The non-coplanar coalescence of interacting defects in fatigue. In: MATTOS PIMENTA, Paulo de (ed.), RICARDO, Luiz Carlos H. (ed.), CAMARÃO, Arnaldo Freitas (ed.). Modern trends on fatigue : proceedings. First SAE Brasil International Conference on Fatigue, 11-14 December 2001, São Paulo, Brasil. [São Paulo: SAE Brasil], 2001. Str. 151-159/2001-01-4052. [COBISS.SI-ID 7070742]

7. FLAŠKER, Jože, ABERŠEK, Boris, BELŠAK, Aleš, BEZENŠEK, Boštjan, ERŽEN, Simon, FAJDIGA, Gorazd, GLODEŽ, Srečko, GRBIČ, Nebojša, LERHER, Tone, PEHAN, Stanislav, REN, Zoran, TAŠNER, Frančišek, ULAGA, Samo, ULBIN, Miran, VIDOVIČ, Janez, ZAFOŠNIK, Boštjan, KRAMBERGER, Janez, POTRČ, Iztok, ŠADL, Rudolf, ŠRAML, Matjaž, ZIERER, Janko, BADER, Silvester, ČEP, Janez, DOLŠAK, Bojan, GOLOB, Borut, HREN, Gorazd, JEZERNIK, Anton, NOVAK, Marina. Računalniško konstruiranje in transport : letno poročilo o rezultatih raziskovalnega programa za leto 2000 [za MŠZŠ]. Maribor: Fakulteta za strojništvo, 2001. 8 f. [COBISS.SI-ID 6247958]

8. BEZENŠEK, Boštjan. The re-characterisation of interacting defects : a presentation delivered at the Research Colloquium at the University of Glasgow on June 12th 2001. Glasgow, 2001. [COBISS.SI-ID 7071510]

9. BEZENŠEK, Boštjan, REN, Zoran, HANCOCK, John W. A study of complex defects failing by fatigue, ductile tearing and cleavage. In: JENČIČ, Igor (ed.), GLUMAC, Bogdan (ed.). Proceedings. International Conference Nuclear Energy in Central Europe 2001, Portorož, Slovenia, September 10-13, 2001. Ljubljana: Nuclear Society of Slovenia, cop. 2001. Str. 402.1-9. ISBN 961-6207-17-2. [COBISS.SI-ID 7072278]

10. BEZENŠEK, Boštjan, HANCOCK, J.W. A constraint based statistical approach to failure from complex defects. In: Fracture mechanics beyond 2000 : proceedings of the 14th Bienniel Conference on Fracture - ECF 14 - held in Cracow, Poland, 8-13 September, 2002. Vol. 1/3. 14th European Conference on Fracture, 8-13 September, Cracow, Poland. Sheffield: EMAS Publications, cop. 2002. Str. 249-256. ISBN 83-88906-07-0. [COBISS.SI-ID 7607062]

11. FLAŠKER, Jože, ABERŠEK, Boris, BADER, Silvester, BELŠAK, Aleš, BEZENŠEK, Boštjan, ČEP, Janez, DOLŠAK, Bojan, ERŽEN, Simon, GRBIČ, Nebojša, GLODEŽ, Srečko, GOLOB, Borut, HREN, Gorazd, JEZERNIK, Anton, KRAMBERGER, Janez, LERHER, Tone, NOVAK, Marina, PEHAN, Stanislav, POTRČ, Iztok, REN, Zoran, ŠRAML, Matjaž, TAŠNER, Frančišek, ULAGA, Samo, ULBIN, Miran, VIDOVIČ, Janez, ZAFOŠNIK, Boštjan, ZIERER, Janko. Računalniško konstruiranje in transport : letno poročilo o rezultatih raziskovalnega programa za leto 2001 [za MŠZŠ] : osnovni podatki raziskovalnega programa. Maribor: Fakulteta za strojništvo, 2002. 1 mapa (loč. pag.). [COBISS.SI-ID 7036950]

12. BEZENŠEK, Boštjan, HANCOCK, J.W. A statistical fracture mechanics analysis of crack path deviations in strength mis-matched joints. In: FLEWITT, P.E.J. (ed.). Engineering structural integrity assessment: needs and provision : proceedings of the Sixth International conference on engineering structural integrity assessment, held at the Manchester Conference Centre, UMIST, 8-9 October 2002. 6th International Conference on Engineering Structural Assessmant, Manchester, 8-9 October, 2002. Sheffield: EMAS, 2002. Str. 281-300. [COBISS.SI-ID 7607574]

13. BEZENŠEK, Boštjan. Application of linear graph theory in designing fracture mechanics experiments. In: AED 2003. 3rd International Conference on Advanced Engineering Design, 1-4 June 2003, Prague, Czech Republic. Prague, 2003. [6 str.]. [COBISS.SI-ID 8103190]

14. BEZENŠEK, Boštjan. Elastic-plastic crack problems in the ductile-brittle transition : a thesis submitted for the degree of Doctor of Philosophy (Ph.D.) to the Department of Mechanical Engineering, Faculty of Engineering, University of Glasgow. Glasgow: [B. Bezenšek], October 2003. XXX, 182 f., ilustr. [COBISS.SI-ID 8506390]

15. BEZENŠEK, Boštjan, HANCOCK, John. W. Increased temperature margins due to constraint loss. In: LAM, Poh-Sang (ed.). Application of fracture mechanics in failure assessment - 2003 -. The 2003 ASME Pressure Vessel and Piping Conference, Cleveland, Ohio, July 20-24, 2003. New York: The American Society of Mechanical Engineers, cop. 2003. Str. 49-56, pvp2003-2007. PVP, Vol. 462. ISBN 0-7918-4153-7. [COBISS.SI-ID 8102678]

16. REN, Zoran, BEZENŠEK, Boštjan. Analiza stabilnosti dogradne plošče rezervoarja. Maribor: Fakulteta za strojništvo, 2004. 11 f., graf. prikazi. [COBISS.SI-ID 8932630]

17. BEZENŠEK, Boštjan, HANCOCK, John. W. Fracture toughness and crack path deviations in laser welded joints. In: LAM, Poh-Sang (ed.). Fracture methodologies and manufacturing processes : PVP-Vol. 474. The 2004 ASME/JSME Pressure Vessels and Piping Conference, San Diego, California, USA, July 25-29, 2004. New York: The American Society of Mechanical Engineers, 2004. Str. 9-15, pvp2004-2295. PVP, Vol. 474. ISBN 0-7918-4669-5. [COBISS.SI-ID 8935190]

18. BEZENŠEK, Boštjan, LI, J., HANCOCK, John. W. Homogeneous and interfacial crack tip fields unified by constraint. In: ICEFA-I 2004 : programme and abstracts. [Amsterdam]: Elsevier, 2004. Str. p1.31. [COBISS.SI-ID 8917014]

19. BEZENŠEK, Boštjan, HANCOCK, John. W. Mode I and mixed mode I/II crack tip fields unified by constraint. In: Advanced fracture mechanics for life and safety assessments : proceedings. The 15th Europen Conference of Fracture ECF 15, August 11-13, 2004, Stockholm, Sweden. [S.l.: s.n.], 2004. 8 f. [COBISS.SI-ID 8936982]

20. FAJDIGA, Gorazd, ZAFOŠNIK, Boštjan, NOVAK, Marina, BEZENŠEK, Boštjan. Razvoj modela za analizo kontaktnih utrujenostnih poškodb : zaključno poročilo o rezultatih raziskovalnega projekta v letu 2004 : podoktorski projekt. Maribor: Fakulteta za strojništvo, 2004. 12 f. [COBISS.SI-ID 8948758]

21. BEZENŠEK, Boštjan, HANCOCK, John. W. The re-characterisation of complex defects. Part I, Fatigue and ductile tearing. Engineering fracture mechanics. [Print ed.]. 2004, vol. 71, issue 7/8, str. 1001-1020. ISSN 0013-7944. http://dx.doi.org/10.1016/S0013-7944(03)00155-3, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 8460822]

22. BEZENŠEK, Boštjan, HANCOCK, John. W. The re-characterisation of complex defects. Part II, Cleavage. Engineering fracture mechanics. [Print ed.]. 2004, vol. 71, issue 7/8, str. 1021-1039. ISSN 0013-7944. http://dx.doi.org/10.1016/S0013-7944(03)00156-5, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 8461078]

23. BEZENŠEK, Boštjan, FLAŠKER, Jože, HANCOCK, John. W. Statistični model krhkega loma nehomogenih materialov. In: KORELC, Jože (ed.), ZUPAN, Dejan (ed.). Zbornik del. Kuhljevi dnevi 2004, Otočec, 30. september - 1. oktober 2004. Ljubljana: Slovensko društvo za mehaniko, 2004. Str. 25-33. ISBN 961-90000-9-9. [COBISS.SI-ID 9064470]

24. BEZENŠEK, Boštjan, REN, Zoran, FLAŠKER, Jože, HANCOCK, John. W. Eksperimentalno ovrednotenje novega statističnega modela krhkega loma nehomogenih materialov. In: KORELC, Jože (ed.), ZUPAN, Dejan (ed.). Zbornik del. Kuhljevi dnevi 2005, Podčetrtek, 22.-23. september 2005. Ljubljana: Slovensko društvo za mehaniko, 2005. Str. 25-31. ISBN 961-91659-0-X. [COBISS.SI-ID 9903894]

25. BEZENŠEK, Boštjan, HANCOCK, John. W. Increased temperature margins due to constraint loss. Journal of pressure vessel technology : Transactions of the ASME. May 2005, vol. 127, no. 2, str. 173-178. ISSN 0094-9930. [COBISS.SI-ID 9762326]

26. BEZENŠEK, Boštjan, BANERJEE, Anuradha, HANCOCK, John. W., 2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado, USA. A statistical model for brittle fracture of functionally graded materials. In: Proceedings of PVP2005. 2005 ASME Pressure vessels and piping conference, July 17-21, 2005, Denver, Colorado, USA. [S.l.]: ASME, 2005. Str. pvp2005-71152/1-7. ISBN 0-7918-3763-7. [COBISS.SI-ID 9763350]