Marko Dunđer

1. SAMARDŽIĆ, Ivan, GLIHA, Vladimir, VUHERER, Tomaž, DUNĐER, Marko. Problematika reparaturnog zavarivanja čelika povišene čvrstoće. In: Zbornik radova = proceedings. 3. Međunarodno savjetovanje Zavarivanje u pomorstvu = 3rd International Conference Welding in Maritime Engineering, Hvar, Croatia, June 02. do 05., 2004. [Zagreb]: Hrvatsko društvo za tehniku zavarivanja, 2004. Str. 409-418. ISBN 953-96454-6-8. [COBISS.SI-ID 8783638]

2. DUNĐER, Marko, VUHERER, Tomaž, KLADARIĆ, Ivica. Weldability investigation of TStE 420 after weld thermal cycle simulation. Strojarstvo : časopis za teoriju i praksu u strojarstvu. 2010, vol. 52, no. 2, str. 97-104, ilustr. ISSN 0562-1887. http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=86058, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 14454038]

3. KOLUMBIĆ, Zvonimir, DUNĐER, Marko. Materijali. Rijeka: Alfa: Sveučilište u Rijeci, Filozofski fakultet, Odsjek za politehniku, 2011. 247 str., ilustr. Udžbenici Sveučilišta u Rijeci. ISBN 978-953-6104-85-7. [COBISS.SI-ID 15973403]

4. VUHERER, Tomaž, GLIHA, Vladimir, MILOVIĆ, Ljubica, DUNĐER, Marko, SAMARDŽIĆ, Ivan. Upute za zavarivanje i pregled čelika za opremu energetskih postrojenja te mogućnosti korištenja simulacija u ZUT-u za unaprjeđenje kvalitete zavara = Instruction of welding and review of steels for power plant equipment and possibility of using HAZ simulation in order to improve weld joint quality. In: SAMARDŽIĆ, Ivan (ed.), DESPOTOVIĆ, Božo (ed.). Suvremene tehnologije i postupci pri izradi tlačne opreme, zavarenih metalnih konstrukcija i proizvoda : zbornik radova = Modern technologies and processes in production of pressure equipment, welded metal constructions and products : conference proceedings. 6. Međunarodno znanstveno-stručno savjetovanje SBZ 2011, Slavonski Brod, 26.-28. listopad 2011 = The 6th International scientific-professional conference SBW 2011, Slavonski Brod, 26-28 October, 2011. Slavonski Brod: Strojarski fakultet, 2011. Str. 1-13. ISBN 978-953-6048-66-3. [COBISS.SI-ID 15485462]

5. VUHERER, Tomaž, DUNĐER, Marko, MILOVIĆ, Ljubica, SAMARDŽIĆ, Ivan, GLIHA, Vladimir. Jekla in varivost nekaterih jekel za termoelektrarne. In: VUHERER, Tomaž (ed.). Zbornik prispevkov. Dan varilne tehnike, industrijske robotike in transporta v industriji 2013, Lendava, 30. maj 2013. [Lendava]: Arma, 2013. Str. 59-66. ISBN 978-961-248-393-7, ISBN 978-961-248-392-0. [COBISS.SI-ID 17045014]

6. VUHERER, Tomaž, DUNĐER, Marko, MILOVIĆ, Ljubica, ZRILIĆ, Milorad, SAMARDŽIĆ, Ivan. Microstructural investigation of the heat-affected zone of simulated welded joint of P91 steel. Metalurgija. 2013, vol. 52, iss. 3, str. 317-320, ilustr. ISSN 0543-5846. http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=140931, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 16609814]

7. VUHERER, Tomaž, GERJEVIČ, Benjamin, MILOVIĆ, Ljubica, DUNĐER, Marko, SAMARDŽIĆ, Ivan. Svojstva sučeono zavarenog spoja korozijski otpornog nehrđajućeg čelika 316 L = Properties of butt weld joint made on corrosion resistant stainless steel 316 L. In: SAMARDŽIĆ, Ivan (ed.), DESPOTOVIĆ, Božo (ed.). "Suvremeni proizvodni postupci, oprema i materiali za zavarene konstrukcije i proizvode" : zbornik radova = "Contemporary production processes, equipment and materials for welded constructions and products" = conference proceedings. 7. Međunarodno znanstveno-stručno savjetovanje SBZ, Slavonski Brod, 23.-25. 10. 2013 = 7th International scientific-professional Conference SB, Slavonski Brod, 23.-25. 10. 2013. Slavonski Brod: Strojarski fakultet, 2013. Str. 11-18. ISBN 978-953-6048-72-4. [COBISS.SI-ID 17276950]

8. SAMARDŽIĆ, Ivan, DUNĐER, Marko, VUHERER, Tomaž. Dependence of hardness and impact energy on cooling time ▫$\Deltat_{8/5}$▫ and temperature for S960QL. Metalurgija. 2014, vol. 54, no. 2, str. 403-406, ilustr. ISSN 0543-5846. Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 18218518]

9. DUNĐER, Marko, VUHERER, Tomaž, SAMARDŽIĆ, Ivan. Impact energy analysis of quenched and tempered fine grain structural steel specimens after weld thermal cycle simulation. Metalurgija. 2014, vol. 53, no. 4, str. 637-640, ilustr. ISSN 0543-5846. http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=180690, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 17884182]

10. VUHERER, Tomaž, FEKONJA, Luka, BAJIĆ, Darko, DUNĐER, Marko, BURZIĆ, Zijah, GOTLIH, Karl. Vpliv prenizke toplotne obdelave po varjenju na žilavost TVP pri jeklu P91/T91. In: POLAJNAR, Ivan (ed.), SUBAN, Marjan (ed.). Avtomatizacija in robotizacija v varilni tehniki : zbornik predavanj. Dan varilne tehnike 2014, Novo mesto, 11. september 2014. Novo mesto: Šolski center, 2014. Str. 113-121, ilustr. ISBN 978-961-6496-32-2. [COBISS.SI-ID 18088982]

11. DUNĐER, Marko, VUHERER, Tomaž, SAMARDŽIĆ, Ivan. Weldability of microalloyed high strength steels TStE 420 and S960QL. Metalurgija. 2014, vol. 53, iss. 3, str. 335-338, ilustr. ISSN 0543-5846. Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 17756182]

12. DUNĐER, Marko, VUHERER, Tomaž, SAMARDŽIĆ, Ivan. Weldability prediction of high strength steel S960QL after weld thermal cycle simulation. Metalurgija. 2014, vol. 53, no. 4, str. 627-630, ilustr. ISSN 0543-5846. http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=180687, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 17830422]

13. VUHERER, Tomaž, DUNĐER, Marko, BAJIĆ, Darko, SAMARDŽIĆ, Ivan. Influence of post weld heat treatment on the HAZ impact toughness on P91 steel. In: SAMARDŽIĆ, Ivan (ed.), DESPOTOVIĆ, Božo (ed.). Zbornik radova = Proceedings of full paper. 8. Međunarodno znanstveno-stručno savjetovanje SBZ 2015, "Projektiranje, izrada i održavanje zavarenih konstrukcija i proizvoda, SBZ 2015" = 8th International scientific-professional Conference SBZ 2015, "Design, production and service of welded constructions and products, SBZ 2015", Slavonski Brod, 21.-23. 10. 2015. Slavonski Brod: Strojarski fakultet, 2015. Str. 259-267. ISBN 978-953-6048-80-9. [COBISS.SI-ID 19061270]

14. DUNĐER, Marko, SAMARDŽIĆ, Ivan, VUHERER, Tomaž. Weldability investigation steel P 91 by weld thermal cycle simulation. Metalurgija. 2015, vol. 54, iss. 3, str. 539-542, ilustr. ISSN 0543-5846. http://hrcak.srce.hr/index.php?show=toc&id_broj=10657, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 18359062]

15. DUNĐER, Marko, VUHERER, Tomaž, SAMARDŽIĆ, Ivan, MARIĆ, Dejan. Analysis of heat-affected zone microstructures of steel P92 after welding and after post-weld heat treatment. International journal of advanced manufacturing technology. June 2019, vol. 102, no. 9/12, str. 3801-3812. ISSN 0268-3768. DOI: 10.1007/s00170-019-03513-8. [COBISS.SI-ID 22548502]

16. VUHERER, Tomaž, DUNĐER, Marko, SAMARDŽIĆ, Ivan, LOJEN, Gorazd. Post weld heat treatment of a high-temperature steel. In: SAMARDŽIĆ, Ivan (ed.), DUSPARA, Miroslav (ed.), MARIĆ, Dejan (ed.). Zbornik radova = Conference proceedings : 11. Međunarodno znanstveno-stručno savjetovanje SBZ 2021, "Strojarske tehnologije u izradi zavarenih konstrukcija i proizvoda, SBZ 2021" = 11. International scientific-professional conference SBW 2021, "Engineering technologies in manufacturing of welded constructions and products, SBW 2021" : Slavnoski Brod, 2021. Slavonski Brod: Strojarski fakultet, 2021. Str. 1-5. [COBISS.SI-ID 87305475]