Iñigo Rodriguez

1. RODRIGUEZ, I., SORIANO, D., ORTIZ-DE-ZARATE, G., CUESTA, M., PUŠAVEC, Franci, ARRAZOLA, P. J. Effect of tool geometry and LCO2 cooling on cutting forces and delamination when drilling CFRP composites using PCD tools. In: RECH, Joël (ed.), OUTEIRO, J.C. (ed.). 6th CIRP Conference on Surface Integrity, 8th - 10th June 2022, Lyon, France. 6th CIRP Conference on Surface Integrity, 8th - 10th June 2022, Lyon, France. [S. l.]: Elsevier, 2022. Vol. 108, str. 752-757, ilustr. Procedia CIRP, Vol. 108. ISSN 2212-8271. https://www.sciencedirect.com/science/article/pii/S2212827122006084, Repository of the University of Ljubljana – RUL , DOI: 10.1016/j.procir.2022.03.116. [COBISS.SI-ID 113755139]

2. RODRIGUEZ, Iñigo, ARRAZOLA, Pedro J., CUESTA, Mikel, STERLE, Luka, PUŠAVEC, Franci. Improving surface integrity when drilling CFRPs and Ti-6Al-4V using sustainable lubricated liquid carbon dioxide. Chinese journal of aeronautics. Jul. 2023, vol. 36, iss. 7, str. 129-146, ilustr. ISSN 1000-9361. https://www.sciencedirect.com/science/article/pii/S1000936122001960, DOI: 10.1016/j.cja.2022.09.004. [COBISS.SI-ID 135011843]

3. RODRIGUEZ, Iñigo, ARRAZOLA, P. J., CUESTA, Mikel, PUŠAVEC, Franci. Hole quality improvement in CFRP/Ti6Al4V stacks using optimised flow rates for ▫$LCO_2$▫ and MQL sustainable cooling/lubrication. Composite structures. Feb. 2024, vol. 329, [article no.] 117687, str. 1-17, ilustr. ISSN 1879-1085. https://www.sciencedirect.com/science/article/pii/S0263822323010334, Repository of the University of Ljubljana – RUL , DOI: 10.1016/j.compstruct.2023.117687. [COBISS.SI-ID 192029443]

4. RODRIGUEZ, Iñigo, ARRAZOLA, Pedro J., PUŠAVEC, Franci. The impact of airborne emissions from coolants and lubricants on machining costs. CIRP annals. 2024, vol. 73, iss. 1, str. 77-80, ilustr. ISSN 0007-8506. https://www.sciencedirect.com/science/article/pii/S0007850624000659, Repository of the University of Ljubljana – RUL , DOI: 10.1016/j.cirp.2024.04.056. [COBISS.SI-ID 201346819]

5. RODRIGUEZ, Iñigo, SORIANO, D., CUESTA, Mikel, PUŠAVEC, Franci, ARRAZOLA, P. J. Tool geometry optimisation for LCO▫$_{2}$▫ assisted milling of Ti6Al4V. In: MEYER, Daniel (ed.). 7th CIRP Conference on Surface Integrity : [15th-17th May 2024, Bremen, Germany]. [Amsterdam]: Elsevier, 2024. Vol. 123, str. 95-100, ilustr. Procedia CIRP, vol. 123. ISSN 2212-8271. https://www.sciencedirect.com/science/article/pii/S2212827124002233, DOI: 10.1016/j.procir.2024.05.019. [COBISS.SI-ID 275138051]
project: CRYOMACH project (INNO-20182049)