Igor Đukić

1. RADMANOVIĆ, Kristijan. Utjecaj mehaničkih svojstava drva na snagu potrebnu za odvajanje čestice pri ortogonalnom rezanju : doktorski rad = Effect of mechanical properties of wood on power consumption in orthogonal cutting : doctoral thesis. Zagreb: [K. Radmanović], 2015. 154 str., 17 str. pril., ilustr. [COBISS.SI-ID 2443657]

2. RADMANOVIĆ, Kristijan, ĐUKIĆ, Igor, MERHAR, Miran, ŠAFRAN, Branimir, JUG, Matija, BELJO LUČIĆ, Ružica. Chip plastic deformation in orthogonal wood cutting. In: 23rd International wood machining seminar : proceedings : 28. - 31. 5. 2017, Warsaw, Poland. Warsaw: Warsaw university of life sciences, 2017. Str. 222-231. ISBN 978-83-948046-0-2. [COBISS.SI-ID 2786185]

3. RADMANOVIĆ, Kristijan, ĐUKIĆ, Igor, MERHAR, Miran, ŠAFRAN, Branimir, JUG, Matija, BELJO LUČIĆ, Ružica. Longitudinal and tangential coefficient chip compression in orthogonal wood cutting. Bioresources. 2018, vol. 13, iss. 4, str. 7998-8011. ISSN 1930-2126. https://bioresources.cnr.ncsu.edu/wp-content/uploads/2018/09/BioRes_13_4_7998_Radmanovic_DMSTL_Longitud_Tangential_Coeff_Chip_Compression_Orthog_Wood_Cutting_13626.pdf, DOI: 10.15376/biores.13.4.7998-8011. [COBISS.SI-ID 2974857]

4. ĐUKIĆ, Igor, MERHAR, Miran, JOVANOVIĆ, Juraj, HERCEG, Darko. Analysis of circular saw tooth marks profile on material machined surface after filtering with fast Fourier transform (FFT) = Analiza profila kinematičkih tragova zubi lista kružne pile na obrađenoj površini materijala provedena filtriranjem na načelu brze Fourierove transformacije (FFT). Drvna industrija : Znanstveno stručni časopis za pitanja drvne tehnologije. 2022, vol. 73, iss. 2, str. 151-162, ilustr. ISSN 0012-6772. https://hrcak.srce.hr/278438, Repository of the University of Ljubljana – RUL , DOI: 10.5552/drvind.2022.0011. [COBISS.SI-ID 110948611]

5. GRUBOR, Mateja, BILANDŽIJA, Nikola, FILIPOVIĆ, Dubrovko, KOVAČEV, Igor, ČOPEC, Krešimir, ĐUKIĆ, Igor, DUBROVIĆ, Kristijan, ŠKET, Branko, SITO, Stjepan. Utjecaj vrste pogona na stvaranje vibracija i buke kod trimera. In: GOBEC, Katja (ed.). Sodobni izzivi v prehranski verigi : mednarodna konferenca : zbornik konference = Contemporary Challenges in the Food Supply Chain : international conference : conference proceedings : Šentjur, 26. in 27. januar 2022. Šentjur: Šolski center, 2022. Str. 82-97, ilustr. ISBN 978-961-6622-25-7. [COBISS.SI-ID 129730051]

6. ĐUKIĆ, Igor, MERHAR, Miran, JOVANOVIĆ, Juraj. Analysis of theoretical machined surface roughness profile after sawing solid oak wood (Quercus robur L.) along the grain with a circular saw. Wood material science & engineering. 2023, vol. 18, no. 4, str. 1534-1544, ilustr. ISSN 1748-0280. https://www.tandfonline.com/doi/full/10.1080/17480272.2022.2158130, DOI: 10.1080/17480272.2022.2158130. [COBISS.SI-ID 138347779]

7. MERHAR, Miran, ĐUKIĆ, Igor, KRŽIŠNIK, Davor, GORNIK BUČAR, Dominika. Thermal treatment, moisture content, and vibration direction’s effect on dynamic properties of spruce wood (Picea abies) for musical instruments. Bioresources. 2025, vol. 20, iss. 4, str. 9857-9876, ilustr. ISSN 1930-2126. https://bioresources.cnr.ncsu.edu/resources/thermal-treatment-moisture-content-and-vibration-directions-effect-on-dynamic-properties-of-spruce-wood-picea-abies-for-musical-instruments/, Repository of the University of Ljubljana – RUL , DOI: 10.15376/biores.20.4.9857-9876. [COBISS.SI-ID 252010755]