Marin Gostimirović

1. ŠKORIĆ, Branko, KAKAŠ, Damir, GOSTIMIROVIĆ, Marin, MILETIĆ, Aleksandar R. Nanoscale modification of hard coatings with ion implantation = Nanovelikostna modifikacija trdnih prekritij z ionsko implantacijo. Materiali in tehnologije. [Tiskana izd.]. 2011, letn. 45, št. 5, str. 447-450. ISSN 1580-2949. http://www.dlib.si/details/URN:NBN:SI:DOC-WCKWVXKO. [COBISS.SI-ID 881066]

2. GOSTIMIROVIĆ, Marin, SEKULIĆ, Milenko, KOPAČ, Janez, KOVAČ, Pavel. Optimal control of workpiece thermal state in creep-feed grinding using inverse heat conduction analysis. Strojniški vestnik. 2011, vol. 57, no. 10, str. 730-738, ilustr. ISSN 0039-2480. http://www.dlib.si/details/URN:NBN:SI:DOC-BXY0LRJ5, DOI: 10.5545/sv-jme.2010.075. [COBISS.SI-ID 12068635]

3. SEKULIĆ, Milenko, KRAMAR, Davorin, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin, KOPAČ, Janez. Application of Taguchi method in the optimization of high-pressure jet assisted turning parameters. In: ÇOLAK, Oğuz (ed.), KOPAČ, Janez (ed.). Proceeding of the 3rd International Conference on Sustainable Life in Manufacturing SLIM 2012, October 2nd-5th, 2012, Istanbul, Turkey. [S. l.]: Süleyman Demirel University, Cad/CAD Research and Application Center; Ljubljana: University of Ljubljana, Laboratory for Cutting, 2012. Str. 7-10, ilustr. [COBISS.SI-ID 12525595]

4. KRAMAR, Davorin, SEKULIĆ, Milenko, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin, KOPAČ, Janez. The implementation of Taguchi method for quality improvement in high-pressure jet assisted turning process. In: ĆOSIĆ, Ilija (ed.). Proceedings. 11th International Scientific Conference MMA 2012 - Advanced Production Technologies, Novi Sad, 20-21 September, 2012. Novi Sad: Faculty of Technical Sciences, Department for Production Engineering, 2012. Str. 37-40, ilustr. ISBN 978-86-7892-429-3. [COBISS.SI-ID 12449563]

5. KRAMAR, Davorin, SEKULIĆ, Milenko, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin, KOPAČ, Janez. The implementation of Taguchi method for quality improvement in high-pressure jet assisted turning process. Journal of production engineering. 2012, vol. 15, no. 2, str. 23-26, ilustr. ISSN 1821-4932. [COBISS.SI-ID 12630043]

6. SEKULIĆ, Milenko, HADŽISTEVIĆ, Miodrag, GOSTIMIROVIĆ, Marin, TURISOVA, Renata, PEJIĆ, Vlastimir. Influence of material properties on the machinability in face milling = Vpliv lastnosti materiala na obdelovalnost pri čelnem rezkanju. Materiali in tehnologije. [Tiskana izd.]. nov.-dec. 2012, letn. 46, št. 6, str. 601-606. ISSN 1580-2949. http://www.imt.si/Revija/, http://www.dlib.si/details/URN:NBN:SI:DOC-87R0PJRI. [COBISS.SI-ID 955818]

7. SEKULIĆ, Milenko, KRAMAR, Davorin, KOPAČ, Janez, GOSTIMIROVIĆ, Marin, KOVAČ, Pavel. Optimization cutting parameters based on cutting temperature in HPJA turning process using taguchi's method. In: GOLUBOVIĆ BUGARSKI, Valentina (ed.). Proceedings = Zbornik radova. 11th International conference on accomplishments in electrical and mechanical engineering and information technology DEMI 2013, Banja Luka, 30th May - 1st June 2013. Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 2013. Str. 487-492. ISBN 978-99938-39-46-0. [COBISS.SI-ID 12932635]

8. SEKULIĆ, Milenko, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin, KRAMAR, Davorin. Optimization of high-pressure jet assisted turning process by Taguchi method. Advances in production engineering & management. 2013, vol. 8, no. 1, str. 5-12, ilustr. ISSN 1854-6250. [COBISS.SI-ID 12994843]

9. GOLUBOVIĆ, Dušan, KOVAČ, Pavel, SAVKOVIĆ, Borislav, JEŠIĆ, Dušan, GOSTIMIROVIĆ, Marin. Testing the tribological characteristics of nodular cast iron austempered by a conventional and an isothermal procedure = Preizkušanje triboloških lastnosti nodularne litine, medfazno kaljenje po konvencionalnem in izotermičnem postopku. Materiali in tehnologije. [Tiskana izd.]. mar.-apr. 2014, letn. 48, št. 2, str. 293-298, ilustr. ISSN 1580-2949. http://mit.imt.si/Revija/izvodi/mit142/golubovic.pdf, http://www.dlib.si/details/URN:NBN:SI:doc-JREUY8PZ. [COBISS.SI-ID 278670848]

10. MUŽENIČ, David, KRAMAR, Davorin, SEKULIĆ, Milenko, GOSTIMIROVIĆ, Marin, KOPAČ, Janez. Hybrid manufacturing : cutting processes with laser assistance. In: DOROSLOVAČKI, Rade (ed.). MMA 2015 Flexible technologies : proceedings. 12th International Scientific Conference MMA 2015 - Flexible Technologies, Novi Sad, 25-26 September 2015. Novi Sad: Faculty of Technical Sciences, 2015. Str. 1-4, ilustr. ISBN 978-86-7892-722-5. [COBISS.SI-ID 14231323]

11. PUCOVSKI, V., SEKULIĆ, Milenko, KRAMAR, Davorin, GOSTIMIROVIĆ, Marin, KOPAČ, Janez. Ultrasonic assisted turning. In: DOROSLOVAČKI, Rade (ed.). MMA 2015 Flexible technologies : proceedings. 12th International Scientific Conference MMA 2015 - Flexible Technologies, Novi Sad, 25-26 September 2015. Novi Sad: Faculty of Technical Sciences, 2015. Str. 29-32, ilustr. ISBN 978-86-7892-722-5. [COBISS.SI-ID 14232091]

12. DJURICA, Danijel, SEKULIĆ, Milenko, KRAMAR, Davorin, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin. Using advanced CAM system in modern machining. Key engineering materials. 2016, vol. 686, str. 27-32, ilustr. ISSN 1662-9795. http://www.scientific.net/KEM.686.27, DOI: 10.4028/www.scientific.net/KEM.686.27. [COBISS.SI-ID 14567451]

13. SEKULIĆ, Milenko, PEJIĆ, Vlastimir, BREZOČNIK, Miran, GOSTIMIROVIĆ, Marin, HADŽISTEVIĆ, Miodrag. Prediction of surface roughness in the ball-end milling process using response surface methodology, genetic algorithms, and grey wolf optimizer algorithm. Advances in production engineering & management. Mar. 2018, vol. 13, no. 1, str. 18-30, ilustr. ISSN 1854-6250. http://apem-journal.org/Archives/2018/APEM13-1_018-030.pdf, http://www.dlib.si/details/URN:NBN:SI:doc-2G82AZIJ, DOI: 10.14743/apem2018.1.270. [COBISS.SI-ID 21315094]

14. RODIĆ, Dragan, SEKULIĆ, Milenko, GOSTIMIROVIĆ, Marin, PUCOVSKY, Vladimir, KRAMAR, Davorin. Fuzzy logic and sub-clustering approaches to predict main cutting force in high-pressure jet assisted turning. Journal of intelligent manufacturing. Jan. 2021, vol. 32, iss. 1, str. 21-36, ilustr. ISSN 0956-5515. https://link.springer.com/article/10.1007/s10845-020-01555-4, DOI: 10.1007/s10845-020-01555-4. [COBISS.SI-ID 17169691]

15. RODIĆ, Dragan, GOSTIMIROVIĆ, Marin, SEKULIĆ, Milenko, SAVKOVIĆ, Borislav, ALEKSIĆ, Andjelko. Fuzzy logic approach to predict surface roughness in powder mixed electric discharge machining of titanium alloy. Strojniški vestnik. Sept./Oct. 2023, vol. 69, no. 9/10, str. 376-387, si 42, ilustr. ISSN 0039-2480. https://www.sv-jme.eu/sl/article/fuzzy-logic-approach-to-predict-surface-roughness-in-powder-mixed-electric-discharge-machining-of-titanium-alloy/, Repository of the University of Ljubljana – RUL , http://www.dlib.si/details/URN:NBN:SI:DOC-MXEV260A, DOI: 10.5545/sv-jme.2023.561. [COBISS.SI-ID 168505859]