COBISS Co-operative Online Bibliographic system & services COBISS
Péter Göncz
Personal bibliography for the period 2008-2021
2008
1.
GÖNCZ, Péter. Računski model za preračun prednapetih vijačnih zvez pri velikih aksialnih ležajih
: diplomsko delo. Maribor: [P. Göncz], 2008. XIII, 76 f., ilustr. [COBISS.SI-ID 12815894]
2009
2.
GLODEŽ, Srečko, GUBELJAK, Nenad, GÖNCZ, Péter. 2D numerical analysis of stress concentration around surface crack due to contact
loading. [Maribor: Faculty of Natural Science and Mathmatics: Faculty of Mechanical Engineering,
2009]. 7 f., ilustr. [COBISS.SI-ID 16711688]
3.
GÖNCZ, Péter, GLODEŽ, Srečko. Calculation model for pre-stressed bolted joints of
slewing bearings. Advanced engineering. 2009, year 3, no. 2, str. 175-186, ilustr. ISSN 1846-5900. [COBISS.SI-ID 17136136]
4.
GÖNCZ, Péter, GLODEŽ, Srečko. Calculation model for pre-stressed bolted joints of
slewing bearings. In: OBSIEGER, Boris (ed.). CADAM 2009 : proceedings. 7th International Conference on Computer Aided Design and Manufacturing, September
22nd-26th 2009, Hvar, Croatia. Rijeka: Zigo, 2009. Str. 17-18, ilustr. ISBN 978-953-7142-38-4.
[COBISS.SI-ID 17139464]
5.
REN, Zoran, GLODEŽ, Srečko, GÖNCZ, Péter. Preračun revizijskih odprtin tlačnega cevovoda. Maribor: Fakulteta za strojništvo, 2009. 19 f., ilustr. [COBISS.SI-ID 13083926]
6.
KRAMBERGER, Janez, GÖNCZ, Péter, VUHERER, Tomaž, GLODEŽ, Srečko. Structural analysis of the torsional spring in a car seat. Maribor: Faculty of Mechanical Engineering, Institute of Structures and Design,
2009. III, 18 str., graf. prikazi. [COBISS.SI-ID 13574422]
2010
7.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Experimental determination of fatigue
crack growth parameters for 42CrMo4 steel. In: OBSIEGER, Boris (ed.). CADAM 2010 : proceedings. 8th International Scientific Conference on Advanced Engineering Computer Aided Design
and Manufacturing, September 21st-25th 2010, Gradac, Croatia. Rijeka: Zigo, 2010.
Str. 19-20, ilustr. ISBN 978-953-7142-52-0. [COBISS.SI-ID 17897992]
8.
KRAMBERGER, Janez, JEZERNIK, Niko, GÖNCZ, Péter, GLODEŽ, Srečko. Extension of the
Tanaka-Mura model for fatigue crack initiation in thermally cut martensitic steels.
In: ATZORI, Bruno (ed.). International Conference on Crack Paths 2009. [S. l.]: Elsevier, cop. 2010. Vol. 77, iss. 11, str. 2040-2050. Engineering Fracture
Mechanics, Vol. 77, Iss. 11 (July 2010). ISSN 0013-7944. DOI: 10.1016/j.engfracmech.2009.12.003. [COBISS.SI-ID 13864982]
9.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Fatigue behaviour of 42CrMo4 steel under
contact loading. In: LUKÁŠ, Petr (ed.), KUNZ, Ludvík (ed.), HUTAŘ, Pavel (ed.). Fatigue 2010 : 10th International Fatigue Congress, [June 6-11, 2010, Prague : book
of abstracts]. Brno: Ústav fyzyku materiálů AV ČR, 2010. Str. 229. ISBN 978-80-87434-00-0. [COBISS.SI-ID
17701896]
10.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Fatigue behaviour of 42CrMo4 steel under
contact loading. Procedia engineering. 2010, vol. 2, no. 1, str. 1991-1999, ilustr. ISSN 1877-7058. http://dx.doi.org/10.1016/j.proeng.2010.03.214, DOI: 10.1016/j.proeng.2010.03.214. [COBISS.SI-ID 17612552]
11.
POTOČNIK, Rok, GÖNCZ, Péter, FLAŠKER, Jože, GLODEŽ, Srečko. Fatigue life of double
row slewing ball bearing with irregular geometry. In: LUKÁŠ, Petr (ed.), KUNZ, Ludvík
(ed.), HUTAŘ, Pavel (ed.). Fatigue 2010 : 10th International Fatigue Congress, [June 6-11, 2010, Prague : book
of abstracts]. Brno: Ústav fyzyku materiálů AV ČR, 2010. Str. 149. ISBN 978-80-87434-00-0. [COBISS.SI-ID
17701384]
12.
POTOČNIK, Rok, GÖNCZ, Péter, FLAŠKER, Jože, GLODEŽ, Srečko. Fatigue life of double
row slewing ball bearing with irregular geometry. Procedia engineering. 2010, vol. 2, no. 1, str. 1878-1886, ilustr. ISSN 1877-7058. http://dx.doi.org/10.1016/j.proeng.2010.03.202, DOI: 10.1016/j.proeng.2010.03.202. [COBISS.SI-ID 17582344]
13.
GÖNCZ, Péter, POTOČNIK, Rok, GUBELJAK, Nenad, GLODEŽ, Srečko. Fracture mechanics model
for fatigue behavior of slewing bearings. In: Fracture of materials and structures from micro to macro scale. 18th European Conference on Fracture, ECF18, 30th August to 3rd September 2010,
Dresden, Germany. Dresden: Conwerk, cop. 2010. 8 str., ilustr. [COBISS.SI-ID 17894152]
14.
GÖNCZ, Péter, GUBELJAK, Nenad, POTOČNIK, Rok, GLODEŽ, Srečko. Fracture mechanics parameters
of 42CrMo4 steel. Advanced engineering. 2010, year 4, no. 1, str. 9-16, ilustr. ISSN 1846-5900. [COBISS.SI-ID 17893896]
15.
DROBNE, Matej, GÖNCZ, Péter, GLODEŽ, Srečko. MKE - analiza napetostno-deformacijskega
stanja na valju pri grobem vročem valjanju = FEM - determination of stress-strain
state of rolls at hot roughing mills. In: ŠIROK, Brane (ed.), EBERLINC, Matjaž (ed.).
Zbornik del. Kuhljevi dnevi, 23. september 2010, Ljubljana. Ljubljana: SDM - Slovensko društvo
za mehaniko, 2010. Str. 25-32, ilustr. ISBN 978-961-91659-5-9. [COBISS.SI-ID 17897480]
16.
POTOČNIK, Rok, FLAŠKER, Jože, GÖNCZ, Péter, GLODEŽ, Srečko. Numerical analysis of
3D surface crack propagation in a large slewing bearing. In: Fracture of materials and structures from micro to macro scale. 18th European Conference on Fracture, ECF18, 30th August to 3rd September 2010,
Dresden, Germany. Dresden: Conwerk, cop. 2010. 8 str., ilustr. [COBISS.SI-ID 17894408]
2011
17.
GÖNCZ, Péter. Contact problems in large slewing bearings : seminar lecture presented at the Department
of Mechanical and Industrial Engineering of University of Brescia, on April 8th, 2011. Brescia, 2011. [COBISS.SI-ID 18368008]
18.
DROBNE, Matej, GÖNCZ, Péter, GLODEŽ, Srečko. Fatigue behavior of high chromium steel
for rolls. In: GUAGLIANO, Mario (ed.), VERGANI, Laura (ed.). Proceedings of 11th International Conference On The Mechanical Behavior Of Materials,
Villa Erba, Como, Italy 2011, June 5-9, 2011. 11th International Conference on the Mechanical Behavior of Materials, Como, 5-9
june 2011. Amsterdam: Elsevier, 2011. Str. 1202-1207. Procedia Engineering, Vol. 10,
2011. ISSN 1877-7058. DOI: 10.1016/j.proeng.2011.04.200. [COBISS.SI-ID 18469896]
19.
DROBNE, Matej, GÖNCZ, Péter, GLODEŽ, Srečko. High cycle fatigue parameters of high
chromium steel. In: TONKOVIĆ, Zdenko (ed.), ALIABADI, M. H. (ed.). Advances in fracture and damage mechanics X : selected, peer reviewed papers from
the 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September
19-21, 2011, Dubrovnik, Croatia. 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September
19-21, 2011, Dubrovnik, Croatia. Zurich: Trans Tech Publications. 2011, str. 299-302.
Key engineering materials, Vols. 488-489, 2012. ISBN 978-3-03785-218-7. ISSN 1013-9826.
DOI: 10.4028/www.scientific.net/KEM.488-489.299. [COBISS.SI-ID 18667016]
20.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Lifetime determination of the raceway
of a large three-row roller slewing bearing. In: TONKOVIĆ, Zdenko (ed.), ALIABADI,
M. H. (ed.). Advances in fracture and damage mechanics X : selected, peer reviewed papers from
the 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September
19-21, 2011, Dubrovnik, Croatia. 10th International Conference on Fracture and Damage Mechanics (FDM 2011), September
19-21, 2011, Dubrovnik, Croatia. Zurich: Trans Tech Publications. 2011, str. 113-116.
Key engineering materials, Vols. 488-489, 2012. ISBN 978-3-03785-218-7. ISSN 1013-9826.
DOI: 10.4028/www.scientific.net/KEM.488-489.113. [COBISS.SI-ID 18666760]
21.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Load capacity of a three-row roller slewing
bearing raceway. In: GUAGLIANO, Mario (ed.), VERGANI, Laura (ed.). Proceedings of 11th International Conference On The Mechanical Behavior Of Materials,
Villa Erba, Como, Italy 2011, June 5-9, 2011. 11th International Conference on the Mechanical Behavior of Materials, Como, 5-9
june 2011. Amsterdam: Elsevier, 2011. Str. 1196-1201. Procedia Engineering, Vol. 10,
2011. ISSN 1877-7058. DOI: 10.1016/j.proeng.2011.04.199. [COBISS.SI-ID 18469128]
22.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Numerical model for determination of
the internal contact force distribution in three-row roller slewing bearing. Advanced engineering. 2011, year 5, no 2, str. 163-168, ilustr. ISSN 1846-5900. [COBISS.SI-ID 16278294]
2012
23.
DROBNE, Matej, GÖNCZ, Péter, GLODEŽ, Srečko. Contact fatigue analysis of a hot strip
mill working roll. In: Abstract CD ROM. International Conference on Fatigue Damage of Structural Materials IX, 16-21 September
2012, The Resort and Conference Center at Hyannis, MA, USA. [Hyannis: s. n.], 2012.
1 str. [COBISS.SI-ID 19473416]
24.
GÖNCZ, Péter, DROBNE, Matej, GLODEŽ, Srečko. Influence of roller profile on the contact
fatigue lifetime of a large three-row roller slewing bearing. In: Abstract CD ROM. International Conference on Fatigue Damage of Structural Materials IX, 16-21 September
2012, The Resort and Conference Center at Hyannis, MA, USA. [Hyannis: s. n.], 2012.
1 str. [COBISS.SI-ID 19473672]
2013
25.
GÖNCZ, Péter, DROBNE, Matej, GLODEŽ, Srečko. Computational model for determination
of dynamic load capacity of large three-row roller slewing bearings. Engineering failure analysis. Sep. 2013, vol. 32, str. 44-53. ISSN 1350-6307. DOI: 10.1016/j.engfailanal.2013.02.030. [COBISS.SI-ID 16792342]
26.
GÖNCZ, Péter, POTOČNIK, Rok, GLODEŽ, Srečko. Computational model for determination
of static load capacity of three-row roller slewing bearings with arbitrary clearances
and predefined raceway deformations. International journal of mechanical sciences. Aug. 2013, vol. 73, str. 82-92, graf. prikazi. ISSN 0020-7403. DOI: 10.1016/j.ijmecsci.2013.04.012. [COBISS.SI-ID 16877078]
27.
GLODEŽ, Srečko, ŠORI, Marko, GÖNCZ, Péter. Določitev nosilnosti vijačnih zvez HSX-1, HSX-2 in HSX-3. Maribor: Fakulteta za strojništvo, Laboratorij za vrednotenje konstrukcij, Inštitut
za konstrukterstvo in oblikovanje, 2013. 15 str., graf. prikazi. [COBISS.SI-ID 17190422]
28.
Mechanism and machine theory. GÖNCZ, Péter (reviewer 2013). New York; Oxford: Pergamon, 1972-. ISSN 0094-114X.
https://www.sciencedirect.com/journal/mechanism-and-machine-theory. [COBISS.SI-ID 5762311]
29.
KRAMBERGER, Janez, LASSEN, Tom, GLIHA, Vladimir, VUHERER, Tomaž, GLODEŽ, Srečko, GÖNCZ,
Péter. Nosilnost zvarov iz jekla in Al-Mg zlitin = Strength of weld in steel and Al-Mg alloys
: končno poročilo o izvajanju slovensko-norveškega bilateralnega projekta za obdobje
2011-2012. Maribor: Fakulteta za strojništvo; Grimstad, Norway: University of Agder, Faculty
of Technology and Science, 2013. [2] f. [COBISS.SI-ID 16786710]
30.
GÖNCZ, Péter. Računski model za določitev nosilnosti velikih aksialnih trirednih valjčnih ležajev
: doktorska disertacija. [Maribor: P. Göncz], 2013. XII, 110 str., ilustr. Digital Library of the University of Maribor – DLUM, http://www.dlib.si/details/URN:NBN:SI:doc-RA84LPQ9. [COBISS.SI-ID 270578176]
31.
POTOČNIK, Rok, GÖNCZ, Péter, GLODEŽ, Srečko. Static capacity of a large double row
slewing ball bearing with predefined irregular geometry. Mechanism and machine theory. June 2013, vol. 64, str. 67-79. ISSN 0094-114X. DOI: 10.1016/j.mechmachtheory.2013.01.010. [COBISS.SI-ID 16705046]
2014
32.
ŠAFARIČ, Riko, BRATINA, Božidar, ŽILIČ FIŠER, Suzana, KRAMBERGER, Janez, GÖNCZ, Péter,
TAŠNER, Frančišek, ŠORGO, Andrej, TRČEK, Janja, SKOK, Barbara, EKART, Janez, et al.
Analiza vzorcev mulja - eksperimentalni del : projekt Izgradnja pilotskega reaktorja
sušenja in razkuževanja komunalnega in/ali industrijskega mulja iz čistilnih naprav. Maribor: [s. n.], 2014. 37 f., ilustr. [COBISS.SI-ID 18471958]
33.
GLODEŽ, Srečko, KRAMBERGER, Janez, GÖNCZ, Péter. Dimenzioniranje prototipa gozdarske prikolice. Maribor: Fakulteta za strojništvo, Laboratorij za vrednotenje konstrukcij, Inštitut
za konstrukterstvo in oblikovanje, 2014. 35 str., ilustr., graf. prikazi. [COBISS.SI-ID
17582102]
34.
GÖNCZ, Péter, GLODEŽ, Srečko. Rolling contact fatigue life assessment of induction
hardened raceway. In: GUAGLIANO, Mario (ed.), VERGANI, Laura (ed.). XVII International Colloquium on Mechanical Fatigue of Metals (ICMFM17). [S. l.]: Elsevier, 2014. Str. 392-396. Procedia engineering, Vol. 74. ISSN 1877-7058.
http://ac.els-cdn.com/S187770581400856X/1-s2.0-S187770581400856X-main.pdf?_tid=0a9f611e-0118-11e4-9e33-00000aab0f02&acdnat=1404216529_46b784cb8c535863f72cc03a481d56fe. [COBISS.SI-ID 17932054]
2015
35.
GÖNCZ, Péter, ULBIN, Miran, GLODEŽ, Srečko. Computational assessment of the allowable
static contact loading of a roller-slewing bearing's case-hardened raceway. International journal of mechanical sciences. May 2015, vol. 94/95, str. 174-184, ilustr. ISSN 0020-7403. [COBISS.SI-ID 18574102]
36.
GÖNCZ, Péter, GLODEŽ, Srečko, POTOČNIK, Rok, PETROGALLI, Candida, MAZZÙ, Angelo, DONZELLA,
Giorgio. Experimental rolling contact fatigue assessment of surface hardened 42CrMo4 steel
specimen : technical report. Maribor: Faculty of mechanical engineering; Trzin: Rotis d.o.o.; Brescia: University
of Brescia, Department of mechanical and industrial engineering, 2014. 14 str., [5]
str. pril., ilustr. [COBISS.SI-ID 18788630]
37.
BRATINA, Božidar, ŠAFARIČ, Riko, KRAMBERGER, Janez, GÖNCZ, Péter, ŠORGO, Andrej, ŽILIČ
FIŠER, Suzana, ROTOVNIK, Milan, BRUMEC, Vilijana, EKART, Janez, KROŠLIN, Tadej. Napredno
vodenje pilotne naprave za sušenje nestabiliziranega komunalnega mulja čistilnih naprav
= Advanced control of a pilot plant for drying of non-stabilized municipal sludge.
In: MUŠKINJA, Nenad (ed.), ROTOVNIK, Milan (ed.). Zbornik devete konference Avtomatizacija v industriji in gospodarstvu - AIG'15, [9.
in 10. april 2015, Maribor, Slovenija]. Maribor: Društvo avtomatikov Slovenije, 2015. Str. 1-7. ISBN 978-961-93818-1-6.
http://www.aig.si/15/zbornik/clanki/Bratina.pdf. [COBISS.SI-ID 18611734]
38.
Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical
engineering science. GÖNCZ, Péter (reviewer 2015). London; Birmingham, Ala.: Mechanical Engineering Publications,
1989-. ISSN 0954-4062. [COBISS.SI-ID 26744320]
39.
KREŽE, Tatjana, MARN, Jure, VUJICA-HERZOG, Nataša, KOSI-ULBL, Irena, KRAMBERGER, Janez,
GÖNCZ, Péter, NOVAK, Mateja, OPRČKAL, Andrej, JELEN, Mitja. Samoevalvacijsko poročilo Fakultete za strojništvo Univerze v Mariboru za študijsko
leto 2013/2014. Maribor: Fakulteta za strojništvo, 2015. 125 str. [COBISS.SI-ID 18456342]
40.
GLODEŽ, Srečko, PAHOLE, Ivo, KRAMBERGER, Janez, BELŠAK, Aleš, GÖNCZ, Péter, TAŠNER,
Frančišek. Snovanje valjastega zalogovnika drv z vrtečim dnom. Maribor: Fakulteta za strojništvo, Laboratorij za vrednotenje konstrukcij, Inštitut
za konstrukterstvo in oblikovanje, 2015. 6 f., ilustr. [COBISS.SI-ID 18574614]
2016
41.
GÖNCZ, Péter, GANTAR, Gašper. Analiza postopka montaže z vtiskavanjem : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 13 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024169686]
42.
GÖNCZ, Péter, GANTAR, Gašper. Analiza postopka protismernega iztiskavanja tube : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 12 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024168662]
43.
GÖNCZ, Péter, GANTAR, Gašper. Analiza tehnologije izdelave toplotnega izmenjevalca : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 13 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024169430]
44.
GÖNCZ, Péter, GANTAR, Gašper. Konstruiranje vpenjalnih orodij za robotsko celico : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 9 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024168918]
45.
ŠAFARIČ, Riko, KRAMBERGER, Janez, ŠORGO, Andrej, EKART, Janez, BRATINA, Božidar, KROŠLIN,
Tadej, ŽILIČ FIŠER, Suzana, GÖNCZ, Péter, TAŠNER, Frančišek, TRČEK, Janja, KRAVANJA,
Zdravko, BRUMEC, Vilijana, FIŠER, Jure. Postopek za sušenje komunalnih in industrijskih muljev : patent : SI24964 (A), 2016-10-28. Ljubljana: Urad Republike Slovenije za intelektualno lastnino, 2016. 11 str., 2
str. pril. [COBISS.SI-ID 22798856]
patent family: Št. prijave: 201500083, 1. 4. 2015; Mednarodna klasifikacija: B09B 3/00
patent family: Št. prijave: 201500083, 1. 4. 2015; Mednarodna klasifikacija: B09B 3/00
46.
GÖNCZ, Péter, GANTAR, Gašper. Razvoj in testiranje kompostabilne sveče : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 43 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024168406]
47.
GÖNCZ, Péter, GANTAR, Gašper. Razvoj naprave za merjenje krivulj mejnih deformacij : [končno poročilo projekta]. Celje: Visoka šola za proizvodno inženirstvo, 2016. 19 f., ilustr., graf. prikazi.
[COBISS.SI-ID 1024169174]
48.
BRATINA, Božidar, ŠAFARIČ, Riko, KRAMBERGER, Janez, GÖNCZ, Péter, ŠORGO, Andrej, ŽILIČ
FIŠER, Suzana, EKART, Janez, BRUMEC, Vilijana, KROŠLIN, Tadej, LAKOTA, Miran. Razvoj
vodenja pilotne naprave za sušenje nestabiliziranega mulja čistilnih naprav = Control
design of a pilot plant for drying ofnon-stabilized municipal sludge. In: LIPIČ, Karel
(ed.), RIŽNAR, Klavdija (ed.), NOVAK, Peter (ed.). Gospodarno z viri za sonaravni razvoj Slovenije : strokovno posvetovanje 2016, Moravske
Toplice, Hotel Ajda, 7. in 8. april 2016. Ljubljana: Zveza ekoloških gibanj Slovenije, 2016. Str. 89-97, ilustr. ISBN 978-961-6119-21-4.
[COBISS.SI-ID 19495446]
2017
49.
BRATINA, Božidar, ŠAFARIČ, Riko, KRAMBERGER, Janez, GÖNCZ, Péter, ŠORGO, Andrej, ŽILIČ
FIŠER, Suzana, ROTOVNIK, Milan, BRUMEC, Vilijana, EKART, Janez, KROŠLIN, Tadej. Sušenje
mulja komunalnih čistilnih naprav. Glasilo. dec. 2017, št. 3, str. 43-53. ISSN 2536-1856. http://www.zid-mb.si/index.php/leto-2017. [COBISS.SI-ID 21043222]
2018
50.
TIŠMA, Goran. Topološka optimizacija nosilcev obremenjenih s temperaturno obremenitvijo in temperaturnim
gradientom : magistrsko delo. Maribor: [G. Tišma], 2018. XIV, 75 str., ilustr. https://dk.um.si/IzpisGradiva.php?lang=slv&id=72366, Digital Library of the University of Maribor – DLUM. [COBISS.SI-ID 22259222]
2021
51.
GANTAR, Gašper, GÖNCZ, Péter, KOVAČIČ, Miha. Optimization of press-fit processes =
Optimizacija postopkov montaže z vtiskovanjem. Materiali in tehnologije. [Tiskana izd.]. mar.-apr. 2021, letn. 55, št. 2, str. 207-212, ilustr. ISSN 1580-2949.
https://mater-tehnol.si/index.php/MatTech/article/view/120/35, http://www.dlib.si/details/URN:NBN:SI:doc-HQFDOLJR, DOI: 10.17222/mit.2020.100. [COBISS.SI-ID 60551427]