Raúl Bermejo

1. AMBROŽIČ, Milan, BERMEJO, Raúl, SUPANCIC, Peter, KOSMAČ, Tomaž. Monte Carlo simulation of Weibull distribution of ceramic strength values. In: Proceedings of the 2008. SEM XI International Congress and Exposition on Experimental and Applied Mechanics, June 2-5, 2008, Orlando, Florida, USA. [S. l.]: Society for Experimental Mechanics, 2008. 8 str. ISBN 0-912053-99-2. [COBISS.SI-ID 21775655]

2. BERMEJO, Raúl. Mechanical properties of low temperature co-fired ceramics : testing methodologies for strength characterization = Mehanske lastnosti keramike z nizko temperaturo žganja : metodologije testiranja trdnosti. Informacije MIDEM : časopis za mikroelektroniko, elektronske sestavne dele in materiale. [Tiskana izd.]. dec. 2012, letn. 42, št. 4, str. 254-259, ilustr. ISSN 0352-9045. http://www.midem-drustvo.si/Journal%20papers/MIDEM_42(2012)4p254.pdf, http://www.dlib.si/details/URN:NBN:SI:doc-MEU59SNW. [COBISS.SI-ID 9977684]

3. MAKAROVIČ, Kostja, BERMEJO, Raúl, KRALEVA, Irina, HOLC, Janez, HROVAT, Marko, BENČAN, Andreja, SANTO-ZARNIK, Marina, BELAVIČ, Darko, KOSEC, Marija. Mechanical properties of low-temperature Co-fired ceramics fired at different temperatures. In: BELAVIČ, Darko (ed.), ŠORLI, Iztok (ed.). Proceedings. 48th International Conference on Microelectronics, Devices and Materials & theWorkshop on Ceramic Microsystems, September 19 - September 21, 2012, Otočec, Slovenia. Ljubljana: MIDEM - Society for Microelectronics, Electronic Components and Materials, 2012. Str. 297-301. ISBN 978-961-92933-2-4. [COBISS.SI-ID 26116391]

4. MAKAROVIČ, Kostja, BENČAN, Andreja, HROVAT, Marko, HOLC, Janez, MALIČ, Barbara, KOSEC, Marija, BERMEJO, Raúl, KRALEVA, Irina. The effect of phase composition on the mechanical properties of LTCC material. International journal of applied ceramic technology. 2013, vol. 10, issue 3, str. 449-457. ISSN 1546-542X. DOI: 10.1111/ijac.12030. [COBISS.SI-ID 26548263]

5. MAKAROVIČ, Kostja, BENČAN, Andreja, HROVAT, Marko, HOLC, Janez, MALIČ, Barbara, KOSEC, Marija, BERMEJO, Raúl, KRALEVA, Irina. The evolution of the mechanical properties of low temperature co-fired ceramics fired at different temperatures. In: Book of abstracts. 13th Conference of the European Ceramic Society, ECERS XIII, June 23-27, 2013, Limoges, France. [S. l.]: ECERS, 2013. Str. 80. [COBISS.SI-ID 26846247]

6. MACAN, Jelena, DUTOUR SIKIRIĆ, Maja, DELUCA, Marco, BERMEJO, Raúl, BAUDIN, Carmen, PLODINEC, Milivoj, SALAMON, Krešimir, ČEH, Miran, GAJOVIĆ, Andreja. Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite. Journal of the mechanical behavior of biomedical materials. 2020, vol. 111, str. 104006-1-104006-12. ISSN 1751-6161. DOI: 10.1016/j.jmbbm.2020.104006. [COBISS.SI-ID 26158851]

7. KOCJAN, Andraž, MIRT, Tadej, SCHWENTENWEIN, Martin, HOFER, Anna-Katharina, BERMEJO, Raúl, JEVNIKAR, Peter. Dental zirconia ceramics : challenges and opportunities. In: a32nd Symposium and Annual Meeting of the International Society for Ceramics in Medicine, Bioceramics 32, September 20-23, 2022, Venice Italy : abstracts. Str. 98. https://bioceramics32.org/wp-content/uploads/2022/09/AbstractBook.pdf. [COBISS.SI-ID 122553603]

8. MIRT, Tadej, KOCJAN, Andraž, BERMEJO, Raúl, JEVNIKAR, Peter. Effect of air-particle abrasion on reliability of additively-manufactured zirconia ceramics. In: PER-IADR : Pan European region of the international association for dental research congress, September 15-17, 2022, Marseille : abstract book. [S. l.: s.n., 2022]. Str. 36. https://www.per-iadr2020.com/docs/Abstract_Book.pdf. [COBISS.SI-ID 136923651]
award: Delo nagrajeno z mednarodno nagrado Senior Robert Frank Award 2022 (Clinical Research 2nd prize)

9. MIRT, Tadej, ABRAM, Anže, VAN DE VELDE, Nigel Willy, JERMAN, Ivan, BERMEJO, Raúl, KOCJAN, Andraž, JEVNIKAR, Peter. Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing. Journal of the European ceramic society. [Print ed.]. 2022, vol. 42, no. 12, str. 5035-5044. ISSN 0955-2219. DOI: 10.1016/j.jeurceramsoc.2022.05.010. [COBISS.SI-ID 107110659]

10. HOFER, Anna-Katharina, KOCJAN, Andraž, BERMEJO, Raúl. High-strength lithography-based additive manufacturing of ceramic components with rapid sintering. Additive manufacturing. [Print ed.]. 2022, vol. 59, part a, str. 103141-1-103141-8. ISSN 2214-8604. DOI: 10.1016/j.addma.2022.103141. [COBISS.SI-ID 121558531]

11. KOCJAN, Andraž, HOFER, Anna-Katharina, BERMEJO, Raúl. Rapid sintering of ceramics. In: Ceramics in Europe 2022, 10th-14th July, 2022, Kraków, Poland : abstract book. Str. 42. ISBN 978-83-942760-9-6. https://www.ceramicsineurope2022.org/conf-data/icc2022/files/Abstract_Book_12_07.pdf. [COBISS.SI-ID 117737731]

12. KOCJAN, Andraž, MIRT, Tadej, SCHWENTENWEIN, Martin, HOFER, Anna-Katharina, BERMEJO, Raúl, JEVNIKAR, Peter. Translucent zirconia dental ceramics : challenges and opportunities. In: 1st Materials Science Colloquium, 66. Metallkunde-Kolloquium, Lech am Arlberg, 19. - 22. April 2022, Austria : program. Leoben: Department Materials Science, 2022. Str. 18. [COBISS.SI-ID 105612803]

13. KOCJAN, Andraž, MIRT, Tadej, SCHWENTENWEIN, Martin, BERMEJO, Raúl, JEVNIKAR, Peter. Introducing highly translucent grades and additive manufacturing to the dental zirconia workflow. In: MS & T23, Materials Science & Technology, October 3-4, 2023, Columbus, Ohio. 1 str. https://www.programmaster.org/PM/PM.nsf/ViewSessionSheets?OpenAgent&ParentUNID=06E20585BEBA3147852589BA00677803. [COBISS.SI-ID 166971907]

14. MIRT, Tadej, KOCJAN, Andraž, BERMEJO, Raúl, JEVNIKAR, Peter. Mechanical properties of additively-manufactured surface-treated 3Y and 5Y zirconia. In: XVIIIth ECerS conference : Conference & Exhibition of the European Ceramic Society : Lyon-France, 2/6 July 2023. Lyon: ECerS. 2023, str. 1. https://www.ecers2023.org/index.php?langue=en&onglet=34&idUser=&emailUser=&printable=1&paramSearch34-0=tadej%20mirt. [COBISS.SI-ID 164710659]

15. HOFER, Anna-Katharina, KOCJAN, Andraž, BERMEJO, Raúl. Templated grain growth in rapid sintered 3D-printed alumina ceramics. Open ceramics. Sep. 2023, vol. 15, [article no.] 100428, str. 1-7, ilustr. ISSN 2666-5395. https://www.sciencedirect.com/science/article/pii/S2666539523001001?via%3Dihub, DOI: 10.1016/j.oceram.2023.100428. [COBISS.SI-ID 160617987]

16. MIRT, Tadej, KOCJAN, Andraž, HOFER, Anna-Katharina, SCHWENTENWEIN, Martin, IVEKOVIĆ, Aljaž, BERMEJO, Raúl, JEVNIKAR, Peter. Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics. Dental materials. [Print ed.]. Jan. 2024, vol. 40, iss. 1, str. 111-117, ilustr. ISSN 0109-5641. Repository of the University of Ljubljana – RUL , DOI: 10.1016/j.dental.2023.10.025. [COBISS.SI-ID 170710019]

17. JABR, Abdullah, KUZMIĆ, Nina, ŠKAPIN, Srečo D., JANTUNEN, Heli, NELO, Mikko, SPREITZER, Matjaž, BERMEJO, Raúl. Towards high strength ▫$SrTiO_3$▫-based composites fabricated at room temperature. Journal of the European Ceramic Society. [Online ed.]. Dec. 2024, vol. 44, iss. 15, [article no.] 116782, str. 1-12, ilustr. ISSN 1873-619X. https://www.sciencedirect.com/science/article/pii/S0955221924006551?via%3Dihub, DOI: 10.1016/j.jeurceramsoc.2024.116782. [COBISS.SI-ID 205728515]

18. JABR, Abdullah, ŠKAPIN, Srečo D., TOMINC, Sara, DANEU, Nina, KOENIG, Jakob, DUCMAN, Vilma, KORAT BENSA, Lidija, BERMEJO, Raúl, SPREITZER, Matjaž. Enhancing densification of metakaolin-based geopolymers via the cold sintering process. Open ceramics. Dec. 2025, vol. 24, [article no.] 100863, str. 1-10, ilustr. ISSN 2666-5395. https://www.sciencedirect.com/science/article/pii/S2666539525001300, DiRROS - Digital repository of Slovenian research organizations, DOI: 10.1016/j.oceram.2025.100863. [COBISS.SI-ID 253167107]