COBISS Co-operative Online Bibliographic system & services COBISS
Giuliano Bissacco
Personal bibliography for the period 2007-2021
2007
1.
BISSACCO, G., VALENTINČIČ, Joško, WIWE, B.D., HANSEN, H.N. Characterization of pulses
in micro EDM milling based on wear and material removal. In: DIMOV, Stefan (ed.),
MENZ, Wolfgang (ed.), TOSHEV, Yuli (ed.). Third International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria,
October 3-5, 2007 : 4M2007 : proceedings. Dunbeath: Whittless, 2007. Str. 297-300. ISBN 978-1-904445-53-1. [COBISS.SI-ID 10222619]
2009
2.
VALENTINČIČ, Joško, BISSACCO, G., BIGOT, S. Snapshot of micro EDM technology for industry.
In: 4M/ICOMM 2009. Cardiff: University, 2009. Str. 415-418. [COBISS.SI-ID 11110427]
2010
3.
BISSACCO, Giuliano, TRISTO, Gianluca, VALENTINČIČ, Joško. Assessment of electrode
wear measurement in micro EDM milling. In: FILLON, Bertrand (ed.), KHAN MALEK, Chantal
G. (ed.), DIMOV, Stefan (ed.). Proceedings of the 7th International Conference on Multi-Material Micro Manufacture,
17-19 November 2010, Bourg en Bresse and Oyonnax, France. Singapore: Research Publishing, 2010. Str. 155-158. ISBN 978-981-08-6555-9, ISBN
981-08-6555-4. [COBISS.SI-ID 11649051]
4.
VALENTINČIČ, Joško, SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano. DFM approach
to custom made micromixer. In: JUNKAR, Mihael (ed.), VALENTINČIČ, Joško (ed.), SABOTIN,
Izidor (ed.). Microreactor Technology for Healthcare Applications, Fiesa, Slovenia, September 26th-28th
2010 : book of abstract of the ESF exploratory workshop. Ljubljana: Laboratory for Alternative Technologies, Faculty of Mechanical Engineering,
2010. Str. 11. ISBN 978-961-6536-43-1. [COBISS.SI-ID 11592987]
5.
VALENTINČIČ, Joško, SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano. DFM approach to custom made micromixer : an invited presentation at Microreactor Technology
for Healthcare Applications, Fiesa, 26th-28th of September 2010. Fiesa, 2010. [COBISS.SI-ID 11799835]
6.
VALENTINČIČ, Joško, BISSACCO, G., TRISTO, G. On machine measurements of electrode
wear in micro EDM milling. In: KUDLÁČEK, Jan (ed.), BARIŠIĆ, Branimir (ed.). CEEPUS workshop, Prague, September 2010. [S. l.: J. Kudláček], 2010. Str. [1-6]. ISBN 978-80-904502-3-3. [COBISS.SI-ID 11558171]
7.
VALENTINČIČ, Joško, BISSACCO, G., TRISTO, G. On machine measurements of electrode
wear in micro EDM milling. In: IN-TECH 2010 : proceedings. International Conference on Innovative Technologies, 14. 09. 2010 to 16. 09. 2010,
Prague, Czech Republic. [S. l.: s. n.], 2010. Str. 346-349. ISBN 978-80-904502-2-6.
[COBISS.SI-ID 11556379]
8.
SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano, JUNKAR, Mihael, VALENTINČIČ,
Joško. Staggered herringbone mixer designed for micro EDM milling. In: ŽNIDARŠIČ PLAZL,
Polona (ed.), et al. IMTB 2010 : [proceedings CD]. International Thematic Conference Implementation of Microreactor Technology into
Biotechnology, Ljubljana, September 29-30, 2010. Ljubljana: Faculty of Chemistry and
Chemical Technology, 2010. Str. [1-6]. ISBN 978-961-6756-20-4. [COBISS.SI-ID 11592475]
9.
BISSACCO, G., VALENTINČIČ, Joško, HANSEN, H.N., WIWE, B.D. Towards the effective tool
wear control in micro-EDM milling. International journal of advanced manufacturing technology. Mar. 2010, vol. 47, no. 1-4, str. 3-9. ISSN 0268-3768. DOI: 10.1007/s00170-009-2057-0. [COBISS.SI-ID 11316507]
2011
10.
BIGOT, S., BISSACCO, Giuliano, VALENTINČIČ, Joško. Die-sinking micro EDM for complex
3D structuring - research directions. In: KÜCK, Heinz (ed.), REINECKE, Holger (ed.),
DIMOV, Stefan (ed.). 4M 2011 : proceedings of the 8th International Conference on Multi-Material Micro
Manufacture, 8-10 November 2011, Stuttgart, Germany. Singapore: Research Publishing, 2011. Str. 100-104. ISBN 978-981-07-0319-6, ISBN
981-07-0319-8. DOI: 10.3850/978-981-07-0319-6_232. [COBISS.SI-ID 12120603]
11.
BISSACCO, Giuliano, HANSEN, H.N., TRISTO, Gianluca, VALENTINČIČ, Joško. Feasibility
of wear compensation in micro EDM milling based on discharge counting and discharge
population characterization. CIRP annals. 2011, vol. 60, iss. 1, str. 231-234. ISSN 0007-8506. DOI: 10.1016/j.cirp.2011.03.064. [COBISS.SI-ID 11959579]
12.
SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano, VALENTINČIČ, Joško. Optimization
of a bottom grooved micromixer design. In: KÜCK, Heinz (ed.), REINECKE, Holger (ed.),
DIMOV, Stefan (ed.). 4M 2011 : proceedings of the 8th International Conference on Multi-Material Micro
Manufacture, 8-10 November 2011, Stuttgart, Germany. Singapore: Research Publishing, 2011. Str. 196-200. ISBN 978-981-07-0319-6, ISBN
981-07-0319-8. DOI: 10.3850/978-981-07-0319-6_233. [COBISS.SI-ID 12120859]
2012
13.
BIGOT, S., SURLERAUX, A., BISSACCO, Giuliano, VALENTINČIČ, Joško. A new modelling
framework for die-sinking micro EDM. In: NOLL, Humbert (ed.). Proceedings of the 9th International Conference on Multi-Material Micro Manufacture,
9 -11 October 2012, Vienna, Austria. Singapore: Research Publishing, 2012. Str. [1-5], ilustr. ISBN 978-981-07-3354-4,
ISBN 981-07-3354-2. DOI: 10.3850/978-981-07-3353-7_309. [COBISS.SI-ID 12697115]
2013
14.
TRISTO, Gianluca, LEBAR, Andrej, BISSACCO, Giuliano, VALENTINČIČ, Joško. Microcontroller
enabled real time monitoring of energy efficiency in micro EDM milling process. In:
JUNKAR, Mihael (ed.), et al. MIT & SLIM 2013 : proceedings of the 12th International Conference on Management of
Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing,
Fiesa, Slovenia, 22th-24th September 2013. Ljubljana: TAVO - Slovene Society for Abrasive Water Jet Technology: LAT - Laboratory
for Alternative Technologies, Faculty of Mechanical Engineering: LABOD - Laboratory
for Cutting, 2013. Str. 189-196, ilustr. ISBN 978-961-6536-67-7. [COBISS.SI-ID 13138203]
15.
SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano, VALENTINČIČ, Joško. Optimization
of grooved micromixer for microengineering technologies = Optimizacija mikromešalnika
z utori za izdelavo z mikroinženirskimi tehnologijami. Informacije MIDEM : časopis za mikroelektroniko, elektronske sestavne dele in materiale. [Tiskana izd.]. mar. 2013, vol. 43, no. 1, str. 3-13, ilustr. ISSN 0352-9045. http://www.midem-drustvo.si/Journal%20papers/MIDEM_43(2013)1p3.pdf, Digitalna knjižnica Slovenije - dLib.si. [COBISS.SI-ID 13045019]
16.
BISSACCO, Giuliano, TRISTO, Gianluca, HANSEN, H. N., VALENTINČIČ, Joško. Reliability
of electrode wear compensation based on material removal per discharge in micro EDM
milling. CIRP annals. 2013, vol. 62, iss. 1, str. 179-182, ilustr. ISSN 0007-8506. DOI: 10.1016/j.cirp.2013.03.033. [COBISS.SI-ID 13237531]
17.
VALENTINČIČ, Joško, SABOTIN, Izidor, TRISTO, Gianluca, BISSACCO, Giuliano, BIGOT,
S. Tooling and microinjection moulding of bottom grooved micromixers. In: AZCARATE,
Sabino (ed.), DIMOV, Stefan (ed.). Proceedings of the 10th International Conference on Multi-Material Micro Manufacture,
8 - 10 October 2013, San Sebastián, Spain. Singapore: Research Publishing, 2013. Str. [1-4], ilustr. ISBN 978-981-07-7248-2.
http://rpsonline.com.sg/proceedings/9789810772475/html/416.xml, DOI: 10.3850/978-981-07-7247-5_416. [COBISS.SI-ID 13754907]
2015
18.
TRISTO, Gianluca, BISSACCO, Giuliano, LEBAR, Andrej, VALENTINČIČ, Joško. Real time
power consumption monitoring for energy efficiency analysis in micro EDM milling.
International journal of advanced manufacturing technology. Jun. 2015, vol. 78, iss. 9, str. 1511-1521, ilustr. ISSN 0268-3768. DOI: 10.1007/s00170-014-6725-3. [COBISS.SI-ID 13851931]
2021
19.
VALENTINČIČ, Joško, BISSACCO, Giuliano, TRISTO, Gianluca. Uncertainty of the electrode
wear on-machine measurements in micro EDM milling. Journal of manufacturing processes. [Print ed.]. Apr. 2021, vol. 64, str. 153-160, ilustr. ISSN 1526-6125. https://www.sciencedirect.com/science/article/pii/S1526612521000402, Repozitorij Univerze v Ljubljani – RUL, DOI: 10.1016/j.jmapro.2021.01.021. [COBISS.SI-ID 49498115]