COBISS Co-operative Online Bibliographic system & services COBISS
Uroš Župerl
Personal bibliography for the period 1988-2024
1988
1.
LIPUŠ, Tomaž, ŽUPERL, Uroš, SCHROLL, Matjaž.
Možnost izgradnje majhne hidroelektrarne na reki Savinji. Celje: Osnovna šola Ivan Kovačič-Efenka, 1988. 11 f. + pril., ilustr. [COBISS.SI-ID
4599861]
1998
2.
ŽUPERL, Uroš.
Sistemizacija merilnih sredstev in nalog v tehniki merjenja dimenzij : diplomsko delo
visokošolskega študija. Maribor: [U. Župerl], 1998. V, 146 f., ilustr. Fakulteta za strojništvo, Diplomska
dela visokošolskega študija.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
3849238]
2000
3.
ŽUPERL, Uroš. Development of systems for computer-aided design of modular fixtures.
In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2000 & Proceedings of the 11th International DAAAM symposium "Intelligent
Manufacturing & Automation: Man - Machine - Nature", University of Rijeka, 19-21st
October 2000, Opatija, Croatia. Vienna: DAAAM International, 2000. Str. 505-506. ISBN 3-901509-13-5. [COBISS.SI-ID
5756950]
2001
4.
ŽUPERL, Uroš, ČUŠ, Franc. Analytical model for analysis of fixtures for clamping thin-wall
workpieces. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium "Intelligent
Manufacturing & Automation: Focus on Precision Engineering" : Jena University of Applied
Sciences, 24-27 October 2001, Jena, Germany. Vienna: DAAAM International, 2001. Str. 527-528. ISBN 3-901509-19-4. [COBISS.SI-ID
6705686]
5.
ŽUPERL, Uroš.
FIXAN (FIXture ANalysis) : programski paket za analizo in optimiranje vpenjalnih priprav
za vpenjanje tankostenskih prizmatičnih in rotacijskih obdelovancev. Maribor: Fakulteta za strojništvo, Laboratorij za odrezavanje, 2001. [COBISS.SI-ID
10663958]
6.
ŽUPERL, Uroš, ČUŠ, Franc. Neural network model for analysis and rationalization of
fixtures. In: KATALINIĆ, Branko (ed.), WESSELY, Emil (ed.).
Proceedings of the 3rd Workshop "Intelligent Manufacturing Systems", 29th November
2001, Wien - Kosice, Slovakia. Wien: DAAAM International; Kosice: DAAAM Slovakia, 2001. Str. 89-90. ISBN 3-901509-31-3.
[COBISS.SI-ID
6847510]
7.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Neural network model for analysis of fixtures.
In: TORRALBA, José M. (ed.).
Proccedings [!] of the International Conference on Advanced Materials Processing Technologies
(AMPT'01), 18-21 September, Universidad Carlos III de Madrid, Leganés, [Madrid], Spain.
Vol. 2, New developments on modelling and manufacturing process control. [Madrid]: Universidad Carlos III de Madrid, 2001. Str. 1125-1131. ISBN 84-95821-05-2,
ISBN 84-95821-07-9. [COBISS.SI-ID
6688790]
8.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. System for optimization of modular fixtures.
In: DOBRZAŃSKI, Leszek A. (ed.).
Proceedings of the 10th Jubilee International Scientific Conference Achievements in
Mechanical & Materials Engineering AMME'2001, Gliwice-Cracow-Zakopane, Poland, December
9-13, 2001. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, cop. 2001. Str. 85-88. ISBN 83-914458-4-4. [COBISS.SI-ID
6835222]
9.
ŽUPERL, Uroš, ČUŠ, Franc. Systems for computer-aided design of fixtures. In: BALIČ,
Jože.
Manufacturing systems for the third millenium. Maribor: Faculty of Mechanical Engineering, 2001. Str. 223-235. ISBN 86-435-0402-5.
[COBISS.SI-ID
6373398]
2002
10.
ČUŠ, Franc, ŽUPERL, Uroš. Algorithm for automated fixture design verification.
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 2002, vol. 9, no. 3/4, str. 17-26. ISSN 1330-3651. [COBISS.SI-ID
7814422]
11.
ČUŠ, Franc, ŽUPERL, Uroš. Algorithm for optimization of modular fixtures. In: KATALINIĆ,
Branko (ed.), KLJAJIN, Milan (ed.).
Proceedings of the 1st DAAAM international conference on Advanced technologies for
developing countries, september 12-14, Slavonski Brod. Osijek: University of Josip Juraj Strossmayer; Slavonski Brod: Mechanical engineering
faculty, 2002. Str. 269-274. ISBN 3-901509-32-1. [COBISS.SI-ID
7363606]
13.
ŽUPERL, Uroš.
Analiza, napoved in optimiranje rezalnih veličin z nevronskimi mrežami : magistrska
naloga. Maribor: [U. Župerl], 2002. XIV, 100 f., ilustr. [COBISS.SI-ID
7205398]
14.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Analytical model for optimization of fixtures.
In: WALICKA, Anna (ed.), WALICKI, Edward (ed.).
Second international tribology conference [also] SITC 2002, Zielona Góra, August 25-28,
2002, [Poland]. Zielona Góra: Technical University Press, [2002]. Str. 305-310. Applied mechanics
and engineering, Vol. 7, special issue "SITC 2002". ISSN 1425-1655. [COBISS.SI-ID
48980993]
15.
ŽUPERL, Uroš, ČUŠ, Franc. A complete algorithm for analysis and optimization of fixtures.
In: BRDAREVIĆ, Safet (ed.), et al.
Proceedings. TMT 2002, 6th International Research/Expert Conference Trends in the Development
Machinery and Associated Technology, Neum, BiH, 18-22 September 2002. Zenica: Faculty
of mechanical engineering, 2002. Str. 103-106. ISBN 9958-617-11-0. [COBISS.SI-ID
7398678]
16.
ČUŠ, Franc, ŽUPERL, Uroš. A complete algorithm for optimization of modular fixtures.
In: KATALINIĆ, Branko (ed.), PAPSTEL, Jyri (ed.).
Proceedings of the 3rd International conference Industrial engineering - New challenges
to SME, 25-27 april 2002, Tallinn, Estonia. Vienna: DAAAM International; Tallinn: DAAAM National Estonia, 2002. Str. 77-80.
[COBISS.SI-ID
7109910]
17.
ŽUPERL, Uroš.
DELNALOG : programski paket za izdelavo in spremljanje delovne dokumentacije v proizvodnji
(orodjarni). Maribor: Fakulteta za strojništvo, Laboratorij za odrezavanje, 2002. [COBISS.SI-ID
10663702]
18.
ŽUPERL, Uroš, ČUŠ, Franc. Fixture analysis model for machining processes. In: KATALINIĆ,
Branko (ed.).
DAAAM International scientific book 2002. Vienna: DAAAM International, 2002. Str. 687-694. ISBN 3-901509-30-5. [COBISS.SI-ID
7353622]
19.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Fixture planning and analysis system for milling
processes. In: FUJII, H. (ed.), MORI, T. (ed.), MEGUID, Shaker A. (ed.).
Mechanics and materials in design : [book of abstracts]. 4th International Conference on M2D-4, Nagoya, Japan, June 5-8, 2002. Gifu: Faculty
of Engineering, Department of Mechanical and Systems Engineering, 2002. Str. 161.
[COBISS.SI-ID
7149334]
20.
ČUŠ, Franc, MURŠEC, Bogomir, PLOJ, T., ŽUPERL, Uroš. A hybrid empirical neural network
approach to the determination of optimal cutting conditions. In: DOBRZAÑSKI, Leszek
A. (ed.).
Proceedings of the 11th International scientific conference Achievements in mechanical
& materials engineering, AMME`2002, Gliwice-Zakopane, Poland, December 15-18, 2002. Gliwice: Organising committee of the International scientific conference, Institute
of Engineering Materials and Biomaterials of the Silesian University of Technology,
2002. Str. 63-66. ISBN 83-914458-7-9. [COBISS.SI-ID
7608854]
21.
BALIČ, Jože, ČUŠ, Franc, PAHOLE, Ivo, LOVREC, Darko, SEMOLIČ, Brane, MILFELNER, Matjaž,
FICKO, Mirko, DRSTVENŠEK, Igor, BREZOČNIK, Miran, KOVAČIČ, Miha, KIKER, Edvard, TUŠEK,
Simona, ŽUPERL, Uroš.
Inteligentni računalniško integrirani obdelovalni sistemi : letno poročilo o rezultatih
raziskovalnega programa za leto 2001 [za MŠZŠ Slovenije] : osnovni podatki raziskovalnega
programa. Maribor: Fakulteta za strojništvo, 2002. 1 mapa (loč. pag.). [COBISS.SI-ID
6995734]
22.
ŽUPERL, Uroš, ČUŠ, Franc. Intelligent fixture planning system for milling process.
In:
Zbornik prednášok. Medzinárodná vedecko-technická konferencia Valivé ložiská a strojárska technologia
2002, 1.-2. 10. 2002, Súl'ov, Slovenská republika. Žilina: Žilinská univerzita, Katedra
technologického inžinierstva, 2002. Str. 155-157. ISBN 80-7135-999-7. [COBISS.SI-ID
7489814]
23.
ŽUPERL, Uroš, ČUŠ, Franc. Model for analysis of fixtures for clamping thin-wall workpieces.
Acta Mechanica Slovaca. 2002, ročnik 6, 2, str. 83-88. ISSN 1335-2393. [COBISS.SI-ID
7165718]
24.
ŽUPERL, Uroš, ČUŠ, Franc. Model za analizo in optimiranje vpenjalnih naprav = A model
for analysing and optimizing fixtures.
Strojniški vestnik. 2002, letn. 48, št. 2, str. 73-86. ISSN 0039-2480. [COBISS.SI-ID
7171094]
25.
ŽUPERL, Uroš, ČUŠ, Franc. Neural network approach to the determination of optimal
cutting conditions. In: KATALINIC, Branko (ed.), WESSELY, Emil (ed.).
Proceedings of the 4th Workshop "Human factor and environmentalist", 5th Decemebr
2002, Vienna-Koscice, Slovakia. Vienna: DAAAM International, cop. 2002. Str. 118-200. ISBN 3-901509-37-2. [COBISS.SI-ID
7704854]
26.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization of cutting conditions by using artificial neural
networks. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Intelligent
Manufacturing & Automation: Learning from nature, Wiena, University of Technology,
23-26th October, 2002. Vienna: DAAAM International, 2002. Str. 623-624. ISBN 3-901509-29-1. [COBISS.SI-ID
7521814]
27.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization of cutting conditions during machining by using
neural networks. In: SULLIVAN, William G. (ed.).
Proceedings of the 12th International conference on flexible automation and intelligent
manufacturing, July 15th - 17th, 2002, Dresden, Germany. München: Oldenbourg Industrieverlag, 2002. Str. 502-511. ISBN 3-486-27036-2. [COBISS.SI-ID
7251478]
28.
ŽUPERL, Uroš, PLOJ, Anton, ČUŠ, Franc. Simulacijski sistem za reševanje problemov
pri načrtovanju vzdrževanja. In: VIŽINTIN, Jože (ed.), BEDENK, Janez (ed.), PODGORNIK,
Bojan (ed.).
SLOTRIB '02 : zbornik predavanj Posvetovanja o pogonskih in alternativnih gorivih,
tribologiji in ekologiji, Portorož, Slovenija, 21.-22. november 2002 = proceedings
of the Conference on Fuels, Tribology and Ecology, Portorož, Slovenia, November 21-22,
2002. Ljubljana: Slovensko društvo za tribologijo: = Slovenian Society of Tribology, 2002.
Str. 245-251. ISBN 961-90254-5-8. [COBISS.SI-ID
7612950]
29.
MILFELNER, Matjaž, ŽUPERL, Uroš. Simulation of cutting forces in ball-end milling
with neural networks. In: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.).
[CIM 2002] : computer integrated manufacturing and high speed machining. 8th International Scientific Conference on Production Engineering, Brijuni, Croatia,
June 13-14, 2002. Zagreb: Croatian Association of Production Engineering, 2002. Str.
i-100-i-111. ISBN 953-97181-4-7. [COBISS.SI-ID
7172374]
30.
ŽUPERL, Uroš, MILFELNER, Matjaž. Sodobne metode optimiranja procesov odrezavanja.
In: POLAJNAR, Andrej (ed.), POJE, Janez (ed.), JUNKAR, Mihael (ed.).
Dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož, 15. in 17. oktober
2002. V Mariboru: Fakulteta za strojništvo; Ljubljana: GZS, Združenje kovinske industrije,
Odbor za orodjarstvo, 2002. Str. 133-136. ISBN 961-6226-48-7. [COBISS.SI-ID
7466774]
31.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Sodobne metode optimiranja v proizvodnih
procesih. In: VUKOVIČ, Goran (ed.).
Management in Evropska unija : zbornik konference z mednarodno udeležbo. 21. znanstvena konferenca o razvoju organizacijskih ved, Portorož, 27. - 29. marec
2002. Kranj: Moderna organizacija, 2002. Knj. 2, str. 820-829. ISBN 961-232-133-7.
[COBISS.SI-ID
7015702]
2003
32.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Cutting force measuring and simulation
of milling process by GA approach. In: DEISENROTH, Michael P. (ed.).
Enterprise integration : a production perspective : electronic proceedings. 17th International conference on production research [also] ICPR-17, August 3-7,
2003, Blacksburg, Virginia, USA. Blacksburg: Virginia Tech, 2003. 7 str. ISBN 0-9721257-3-6.
[COBISS.SI-ID
8206358]
33.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Cutting force model for 3D ball-end milling.
In: KATALINIĆ, Branko (ed.).
DAAAM International scientific book 2003. Vienna: DAAAM International, 2003. Str. 149-158. DAAAM International scientific
book. ISBN 3-901509-36-4. ISSN 1726-9687. [COBISS.SI-ID
8130838]
34.
ŽUPERL, Uroš, ČUŠ, Franc, KOPAČ, Janez. Cutting force modelling in end milling with
multilevel perceptron. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2003 & proceedings of the 14th International DAAAM symposium "Intelligent
manufacturing & Automation: focus on reconstruction and development" 22-25th October
2003, Sarajevo, Bosnia and Herczegovina. Vienna: DAAAM International, 2003. Str. 517-518. ISBN 3-901509-34-8. [COBISS.SI-ID
8384790]
35.
ČUŠ, Franc, ŽUPERL, Uroš, PLOJ, Anton, MURŠEC, Bogomir. Dynamic neural network approach
for tool cutting force modeling of end milling operations. In: DOBRZAŃSKI, Leszek
A. (ed.).
Proceedings of the 12th International Scientific Conference Achievements in Mechanical
& Materials Engineering AMME'2003, Gliwice-Cracow-Zakopane, Poland, December 07-10,
2003. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, cop. 2003. Str. 179-182. ISBN 83-914458-9-5. [COBISS.SI-ID
2068780]
36.
ČUŠ, Franc, ŽUPERL, Uroš. Dynamic neural network approach for tool cutting force modelling
of end milling operations. In: DEISENROTH, Michael P. (ed.).
Enterprise integration : a production perspective : electronic proceedings. 17th International conference on production research [also] ICPR-17, August 3-7,
2003, Blacksburg, Virginia, USA. Blacksburg: Virginia Tech, 2003. 7 str. ISBN 0-9721257-3-6.
[COBISS.SI-ID
8207382]
37.
ČUŠ, Franc, ŽUPERL, Uroš. Force analysis model for optimization of fixtures.
Applied mechanics and engineering. 2003, vol. 8, no. 3, str. 365-378. ISSN 1425-1655. [COBISS.SI-ID
8308502]
38.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Genetic algorithm based optimisation of end
milling parameters. In: JĘDRZEJEWSKI, Jerzy (ed.).
Manufacturing flexibility design and development. Wroclaw: Editorial institution of the Wroclaw board of federation of scientific
societies not, 2003. Vol. 3, no 1/2, str. 116-126. Machine engineering, Vol. 3, no.
1/2, 2003. ISSN 1642-6568. [COBISS.SI-ID
7869462]
39.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. An intelligent system for optimizing
modular fixtures. In: ADAMCZAK, Stanisĺaw (ed.), OSANNA, P. Herbert (ed.).
Computer - aided systems for manufacture and measurement of machine elements : science
report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, c. 2003. Str. 293-300. CEEPUS
Project PL-1, Kielce university of technology. ISBN 83-88906-30-5. [COBISS.SI-ID
8521750]
40.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Machining parameter optimization by using
neural networks. In: KATALINIĆ, Branko (ed.).
DAAAM International scientific book 2003. Vienna: DAAAM International, 2003. Str. 631-638. DAAAM International scientific
book. ISBN 3-901509-36-4. ISSN 1726-9687. [COBISS.SI-ID
8132118]
41.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Modelling of end milling process by generalized
regression networks. In:
Automatyzacja produkcji : nauka-wiedza-innowacje, Referaty plenarne i sesyjne. Tom.
1. IV Wroclawskie Sympozjum, Wroclaw, 11-12 grudnia 2003. Wroclaw: Oficyna Wydawnicza
Politechniki Wroclawskiej, 2003. Prace Naukowe Institutu Technologii Maszyn i Automatyzacji
Politechniki Wroclawskiej, 84, Konferencje, 41. [COBISS.SI-ID
8926486]
42.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Neural network based model for prediction
of cutting forces in milling. In: KUZMAN, Karl (ed.).
Conference proceedings. 4th International Conference on Industrial Tools ICIT 2003, Bled, Celje, Slovenia,
April 8-12, 2003. Celje: Tecos, Slovenian Tool and Die Development Centre, 2003. Str.
361-366. ISBN 961-90401-7-1. [COBISS.SI-ID
7850262]
43.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Neural network based optimisation of end milling
parameters. In: CIGLAR, Damir (ed.).
Computer integrated manufacturing and high speed machining : [9th international scientific
conference on production engineering, June 5-6, 2003, Lumbarda, Korčula, CIM 2003]
: knjiga sažetaka. Zagreb: Croatian association of production engineering, 2003. Str. iii-011. [COBISS.SI-ID
8002838]
44.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Neural network based optimisation of end milling
parameters. In: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.).
Computer integrated manufacturing and high speed machining. 9th International Scientific conference on production engineering, CIM 2003, Lumbarda,
Korčula, June 05/06, 2003. Zagreb: Croatian association of production engineering,
2003. Str. iii-011-iii-018. ISBN 953-97181-5-5. [COBISS.SI-ID
7974166]
45.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš, MILFELNER, Matjaž. Oblikovanje profila sodobnega
inženirja v globalnih spremembah univerzitetnega okolja. In: POLAJNAR, Andrej (ed.),
POJE, Janez (ed.), JUNKAR, Mihael (ed.).
Presežimo meje na nov način : dobavitelj - kupec - orodjar : zbornik posvetovanja,
Portorož, 14.-16. oktober 2003. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo; v Mariboru:
Fakulteta za strojništvo, 2003. Str. 93-102. ISBN 961-6226-61-4. [COBISS.SI-ID
8373270]
46.
ŽUPERL, Uroš, KIKER, Edvard, ČUŠ, Franc. Optimization in ball-end milling by using
adaptive neural controller. In:
Conference proceedings. International conference on industrial technology [also] IEEE ICIT 2003, Hotel Habakuk
Maribor, Slovenia, December 10-12, 2003. Piscataway: IEEE, 2003. Str. 393-398. ISBN
0-7803-7853-9. [COBISS.SI-ID
8481814]
47.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization of cutting conditions during cutting by using
neural networks.
Robotics and computer-integrated manufacturing. 2003, vol. 19, iss. 1/2, str. 189-199. ISSN 0736-5845. [COBISS.SI-ID
7747350]
48.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Optimization routine for milling with
improved feed-forward neural network. In: KATALINIĆ, Branko (ed.), TUFEKČIĆ, Džemo
(ed.), ŠELO, Ramiz (ed.).
Proceedings of the 2nd DAAAM International conference on Advanced technologies for
developing countries, June 25-28, 2003, Tuzla, Bosnia and Herzegovina. Tuzla: Faculty of Mechanical Engineering; Vienna: DAAAM International, 2003. Str.
369-374. ISBN 9958-609-14-2. [COBISS.SI-ID
8008470]
49.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization routine for milling with improved radial basis
neural network. In: VIVANCOS CALVET, Joan (ed.), et al.
Proceedings. TMT 2003, 7th International Research/Expert Conference Trends in the Development
Machinery and AssociatedTechnology, Lloret de Mar, Barcelona, Spain, 15-17 September
2003. Zenica: Faculty of mechanical engineering, 2003. Str. 297-300. ISBN 9958-617-18-8.
[COBISS.SI-ID
8205590]
50.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization routine for turning with improved multilevel
perception. In: ĆOSIĆ, Ilija (ed.).
Zbornik radova = Proceedings. VIII Međunarodna konferencija Fleksibilne tehnologije MMA 2003, 26-27. jun/June
2003, Novi Sad. Novi Sad: Fakultet tehničkih nauka, Institut za proizvodno mašinstvo,
2003. Str. 27-28. [COBISS.SI-ID
8051734]
51.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Optimization routine for turning with improved
multilevel perceptron. In: GYENGE, Csaba (ed.).
Annals of MTeM for 2003 & Proceedings of the 6th International conference Modern technologies
in manufacturing, 2nd-4th October 2003, [Cluj-Napoca]. Cluj-Napoca: Technical university, Faculty of machine building, Department of manufacturing
engineering, 2003. Str. 145-148. ISBN 973-656-490-8. [COBISS.SI-ID
8320534]
52.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Optimization technique for end milling with
improved radial basis neural network. In: SKOŁUD, Božena (ed.), KRENCZYK, Damian (ed.).
Computer integrated manufacturing. Warszawa: Wydawnictwa Naukowo - Techniczne, 2003. Str. 650-655. Advanced design
and management, Vol. 1, no. 1-5, 2003. ISBN 83-204-2850-5. [COBISS.SI-ID
7975446]
53.
ŽUPERL, Uroš, ČUŠ, Franc. Prediction of cutting forces by generalized regression networks.
In: OBSIEGER, Boris (ed.).
CADAM 2003 : book of abstracts. Ičići: Revelin, 2003. Str. 55-56. ISBN 953-98665-2-9. [COBISS.SI-ID
8247062]
54.
ŽUPERL, Uroš.
REZPAR : računalniški program za izbiro priporočenih rezalnih parametrov. Maribor: Fakulteta za strojništvo, Laboratorij za odrezavanje, 2003. [COBISS.SI-ID
10664214]
55.
ČUŠ, Franc, MILFELNER, Matjaž, BALIČ, Jože, ŽUPERL, Uroš. Simulation and optimization
of milling with genetic algorithms. In: PODLUBNÝ, Igor (ed.), KOSTÚR, Karol (ed.).
Proceedings of International Carpathian control conference. 4th International Carpathian control conference (ICCC'2003), 17th International
conference autoamted systems of control of technological processe (ASRTP'2003), XXVIIIth
Seminary ASO'2003 "Instruments & control" (ASO'2003), 5th Automatyzacja Maszyn, Urządzeń
i Procesów (APRO), High Tatras, Grandhotel Praha, Slovak Republic, May 26-29, 2003.
Košice: Technical University, BERG Faculty, 2003. Str. 249-252. ISBN 80-7099-509-2.
[COBISS.SI-ID
8133910]
56.
ŽUPERL, Uroš, ČUŠ, Franc. Solving the production process allocation problem by evolutionary
technique and utopian point method. In: FLORJANČIČ, Jože (ed.), JESENKO, Jože (ed.).
Management and organization development : collection of papers from 22nd International
Scientific Conference on Development of Organizational Sciences, Slovenia, Portorož,
March, 26th-28th 2003. Kranj: Modern Organization, 2003. Str. 277-284. ISBN 961-232-151-5. [COBISS.SI-ID
7817750]
57.
MILFELNER, Matjaž, ČUŠ, Franc, ŽUPERL, Uroš. A system for the simulation of the cutting
process in end milling. In: ADAMCZAK, Stanisĺaw (ed.), OSANNA, P. Herbert (ed.).
Computer - aided systems for manufacture and measurement of machine elements : science
report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, c. 2003. Str. 209-218. CEEPUS
Project PL-1, Kielce university of technology. ISBN 83-88906-30-5. [COBISS.SI-ID
8521494]
58.
PLOJ, Anton, MURŠEC, Bogomir, ČUŠ, Franc, ŽUPERL, Uroš. Testing of machines for processing
of waste materials in agriculture. In: DOBRZAŃSKI, Leszek A. (ed.).
Proceedings of the 12th International Scientific Conference Achievements in Mechanical
& Materials Engineering AMME'2003, Gliwice-Cracow-Zakopane, Poland, December 07-10,
2003. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, cop. 2003. Str. 735-738. ISBN 83-914458-9-5. [COBISS.SI-ID
2069036]
59.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Tool cutting force modeling in ball end milling
using artificial neural networks. In: AHMAD, Munir (ed.), MILLER, William (ed.), YALCIN,
Ali (ed.).
Proceedings of the 13th International conference on flexible automation and intelligent
manufacturing, June 9th - 11th, Tampa, Florida, USA. [S.l.: s.n.], 2003. Vol. 1, str. 375-384. [COBISS.SI-ID
8047638]
60.
ČUŠ, Franc, ŽUPERL, Uroš. Tool cutting force modeling in ball end milling using multilevel
perception. In: OLABI, Abdul Ghani (ed.), HASHMI, M.S.J (ed.).
Proceedings of the International conference on advances in materials and processing
technologies (AMPT 2003), 8-11 July 2003, Dublin. Dublin: Dublin City University, cop. 2003. Vol. 1, str. 840-843. ISBN 1-8723-2739-7.
[COBISS.SI-ID
8049174]
61.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože, MILFELNER, Matjaž. Tool cutting force modeling
in end milling with improved multilevel perceptron. In: PODLUBNÝ, Igor (ed.), KOSTÚR,
Karol (ed.).
Proceedings of International Carpathian control conference. 4th International Carpathian control conference (ICCC'2003), 17th International
conference autoamted systems of control of technological processe (ASRTP'2003), XXVIIIth
Seminary ASO'2003 "Instruments & control" (ASO'2003), 5th Automatyzacja Maszyn, Urządzeń
i Procesów (APRO), High Tatras, Grandhotel Praha, Slovak Republic, May 26-29, 2003.
Košice: Technical University, BERG Faculty, 2003. Str. 253-256. ISBN 80-7099-509-2.
[COBISS.SI-ID
8134166]
2004
62.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. An adaptive fuzzy inference system for prediction
of cutting forces in end milling. In: WANG, Lihui (ed.), et al.
Proceedings of the 14th International conference on flexible automation & intelligent
manufacturing, June 12-14, 2004, Toronto, Canada. Ottawa, Ontario, Canada: National research council of Canada, 2004. Str. 1081-1088.
ISBN 0-662-37217-4. [COBISS.SI-ID
8967958]
63.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Adaptive neural controller in ball-end milling.
In:
ROBTEP 2004 : zborník prispevkov = proceedings. 7. celoštátna konferencia s medzinárodnou účastʹou Automatizácia/robotika v teórii
a praxi = 7th international conference Automatization / Robotics in theory and practice,
Slovakia, Vyšné Ružbachy, May 19-21, 2004. Košice: Tehnická univerzita, Strojnícka
Fakulta, Ústav konštrukcie strojov a zariadení, Katedra výrobnej techniky a robotiky,
2004. Str. 589-593. ISBN 80-8073-134-9. [COBISS.SI-ID
8927254]
64.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Adaptive neural controller in ball-end milling.
In:
6. mezinárodní vědecko-technická konference Řízení procesů 2004 = Proceedings [of]
the 6th International scientific-technical conference Process control 2004, 8-11 June
2004, Kouty nad Desnou, Czech republic. Pardubice: University, 2004. Str. r216-1-r216-6. ISBN 80-7194-662-1. [COBISS.SI-ID
8928022]
65.
ŽUPERL, Uroš.
Adaptivno nastavljanje rezalnih pogojev med procesom frezanja - regulacija rezalnih
sil pri frezanju : vabljeno predavanje na Fakulteti za strojništvo Univerze v Ljubljani,
v okviru predmeta Odrezavanje II. Ljubljana, 2004. [COBISS.SI-ID
9271574]
66.
ŽUPERL, Uroš, ČUŠ, Franc. Cutting force estimation for ball endmills based on multilayer
network. In: KATALINIĆ, Branko (ed.), VEŽA, Ivica (ed.), BILIĆ, Boženko (ed.).
Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for
Developing Countries, June 23-26, 2004, Split, Croatia : ATDC'04. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineeringand
Naval Architecture; Vienna: DAAAM International, 2004. Str. 209-214. ISBN 953-6114-68-2.
[COBISS.SI-ID
8872470]
67.
ŽUPERL, Uroš.
DARP : računalniški program za digitalno adaptacijo rezalnih parametrov na obdelovalnem
stroju HELLER BEA 02. Maribor: Fakulteta za strojništvo, Laboratorij za odrezavanje, 2004. [COBISS.SI-ID
10664726]
68.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Development of an artificial neural network-based
predictive machining simulator for end milling. In:
Proceedings of the International conference on manufacturing systems ICMaS 2004, Bucharest
7-8 October, 2004. Bucharest: University Politechnica: Editura Academiei Române, 2004. Str. 141-144.
Romanian Journal of Technical Sciences, Applied Mechanics, Tome 49. ISBN 973-27-1102-7.
ISSN 0035-4074. [COBISS.SI-ID
9368342]
69.
ŽUPERL, Uroš.
Dinamično optimiranje rezalnih pogojev med postopkom frezanja z uporabo hibridnih
nevronsko-evolucijskih tehnik : doktorska disertacija. Maribor: [U. Župerl], 2004. XV, 136 f., ilustr. [COBISS.SI-ID
9187862]
71.
ŽUPERL, Uroš, KIKER, Edvard, ČUŠ, Franc. A force adaptive fuzzy control strategy for
end-milling process. In:
Mechatronics 2004 : conference proceedings. 9th Mechatronics Forum International Conference, August 30-September 1, 2004, Ankara,
Turkey. Ankara: Atilim University, cop. 2004. 10 str. ISBN 975-6707-13-5, ISBN 975-6707-12-7.
[COBISS.SI-ID
9038358]
72.
ŽUPERL, Uroš, ČUŠ, Franc, MURŠEC, Bogomir, PLOJ, Anton. A Hybrid analytical-neural
network approach to the determination of optimal cutting conditions.
Journal of materials processing technology. 20. Dec. 2004, vol. 157/158, str. 82-90. ISSN 0924-0136.
http://dx.doi.org/10.1016/j.jmatprotec.2004.09.019,
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
2170924]
73.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Miran. Modeling of end milling with multilevel
perception. In: KATALINIĆ, Branko (ed.), et al.
DAAAM International scientific book 2004. Vienna: DAAAM International, cop. 2004. Str. 707-714. DAAAM International scientific
book. ISBN 3-901509-38-0. ISSN 1726-9687. [COBISS.SI-ID
9135894]
74.
ŽUPERL, Uroš, MILFELNER, Matjaž. Neural network based end milling simulator. In:
Business systems management. 3rd International scientific conference Business systems management [also] UPS 2004,
September 23rd-24th, 2004, University of Mostar, BiH. Mostar: University of Mostar,
Faculty of Mechanical Engineering; Vienna: DAAAM, cop. 2004. Str. 297-298. ISBN 3-901509-24-0.
[COBISS.SI-ID
9033494]
75.
ŽUPERL, Uroš, ČUŠ, Franc. On-line cutting force modelling for copy endmills based
on multilayer perceptron. In: KATALINIĆ, Branko (ed.), PAPSTEL, Jyri (ed.).
Proceedings of the 4th International conference Industrial engineering - New challenges
to SME, 29-30th April 2004, Tallinn, Estonia. Vienna: DAAAM International; Tallinn: DAAAM National Estonia, 2004. Str. 169-172.
[COBISS.SI-ID
8764182]
76.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. On-line cutting force modelling for end mills
with corner radii based on regression networks. In: JĘDRZEJEWSKI, Jerzy (ed.).
Machine tools and factories of the knowledge. Wroclaw: Machine engineering editorial office, Editorial institution of the Wroclaw
board of federation of scientific societies federation NOT, 2004. Vol. 4, no 1/2,
str. 235-243. Machine engineering, Vol. 4, no. 1/2, 2004. ISSN 1642-6568. [COBISS.SI-ID
8709398]
77.
MILFELNER, Matjaž, ŽUPERL, Uroš. Optimierung für Produktivitätsfortschritte und bessere
Umsätze. In: ADAMCZAK, Stanisĺaw (ed.), et al.
Measuring technology in advanced machine manufacturing systems : science report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2004. Str. 91-97. ISBN 83-88906-65-8.
[COBISS.SI-ID
9371158]
78.
ŽUPERL, Uroš, MILFELNER, Matjaž. Optimiranje rezalnih pogojev pri operaciji struženja
z uporabo umetnih nevronskih mrež. In: KLANJŠEK, Martin (ed.).
Znanstveno delo podiplomskih študentov v Sloveniji - "publish or perish!" : e-knjiga. Ljubljana: Društvo mladih raziskovalcev Slovenije, 2004. Str. 783-794. ISBN 961-90669-7-9.
[COBISS.SI-ID
9435158]
79.
MILFELNER, Matjaž, ŽUPERL, Uroš, ČUŠ, Franc. Optimisation of cutting parameters in
high speed milling process by GA.
International journal of simulation modelling. Dec. 2004, vol. 3, no 4, str. 121-131. ISSN 1726-4529. [COBISS.SI-ID
9200918]
80.
MILFELNER, Matjaž, ČUŠ, Franc, ŽUPERL, Uroš. Prediction of cutting forces with GA
approach. In: KATALINIĆ, Branko (ed.), et al.
DAAAM International scientific book 2004. Vienna: DAAAM International, cop. 2004. Str. 389-396. DAAAM International scientific
book. ISBN 3-901509-38-0. ISSN 1726-9687. [COBISS.SI-ID
9133334]
81.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Prestrukturiranje v smeri višjih tehnoloških
stopenj z optimiranjem procesov obdelave. In:
Management, knowledge and EU : proceedings of the 23rd International Conference on
Organizational Science Development = Management, znanje in EU : zbornik 23. mednarodne
znanstvene konference o razvoju organizacijskih ved, Slovenija, Portorož, 24.-26.
marec 2004. Proceedings of the 23rd International Scientific Conference on organizational Science
Development, Slovenia, Portorož, March, 24th-26th 2004. Kranj: Moderna organizacija:
= Modern Organization, 2004. Str. 10-16. ISBN 961-232-167-1. [COBISS.SI-ID
8647702]
82.
ŽUPERL, Uroš.
PSOOPT : računalniški program za PSO-optimizacijo. Maribor: Fakulteta za strojništvo, Laboratorij za odrezavanje, 2004. [COBISS.SI-ID
10664470]
83.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Racionalizacija procesa frezanja z metodo
nevronskih mrež. In: POLAJNAR, Andrej (ed.), POJE, Janez (ed.), JUNKAR, Mihael (ed.).
Poti k novemu napredku : dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož,
12.-14. oktober 2004. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo; v Mariboru:
Fakulteta za strojništvo, 2004. Str. 213-218. ISBN 961-6226-70-3. [COBISS.SI-ID
9119510]
84.
ŽUPERL, Uroš, ČUŠ, Franc. Simulation of hard end milling by using neural network.
In: DUDÁS, Illés (ed.).
Proceeding of the 11th International conference on tools, ICT-2004 September 9-11,
2004, Miskolc, Hungary. Miskolc: Department of Production engineering, Faculty of mechanical engineering,
2004. Str. 337-342. A Miskolci Egyetem közleményei. 3. sorozat, Gépészet. ISSN 1215-0851.
[COBISS.SI-ID
9455382]
85.
MILFELNER, Matjaž, ŽUPERL, Uroš. Sistem za spremljanje in optimiranje procesa frezanja.
In: KLANJŠEK, Martin (ed.).
Znanstveno delo podiplomskih študentov v Sloveniji - "publish or perish!" : e-knjiga. Ljubljana: Društvo mladih raziskovalcev Slovenije, 2004. Str. 399-407. ISBN 961-90669-7-9.
[COBISS.SI-ID
9434902]
86.
ŽUPERL, Uroš, MILFELNER, Matjaž. Technologische Einflussgrössen bei der HSC - Stahlbearbeitung.
In: ADAMCZAK, Stanisĺaw (ed.), et al.
Measuring technology in advanced machine manufacturing systems : science report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2004. Str. 231-236. ISBN 83-88906-65-8.
[COBISS.SI-ID
9371414]
88.
ŽUPERL, Uroš, ČUŠ, Franc. Tool wear estimation in end milling by using the adaptive
neuro-fuzzy system. In: BAY, Nielsen (ed.).
Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes,
Nyborg, Denmark, June 15-18, 2004 : ICTMP2004. Lyngby: Department of Manufacturing Engineering and Management, Technical University
of Denmark, 2004. Vol. 1, str. 179-186. ISBN 87-91035-12-0. [COBISS.SI-ID
8964886]
89.
ŽUPERL, Uroš, ČUŠ, Franc. Tool wear prediction adaptive neuro-fuzzy system. In: KATALINIĆ,
Branko (ed.).
Annals of DAAAM for 2004 & proceedings of the 15th International DAAAM symposium "Intelligent
manufacturing & Automation: globalisation - technology - men - nature", 3-6th November
2004, Vienna, Austria. Vienna: DAAAM International, 2004. Str. 507-508. ISBN 3-901509-42-9. [COBISS.SI-ID
9138710]
90.
MILFELNER, Matjaž, ČUŠ, Franc, ŽUPERL, Uroš. Use of genetic algorithms for the optimization
of the cutting conditions. In:
Proceedings of the International conference on manufacturing systems ICMaS 2004, Bucharest
7-8 October, 2004. Bucharest: University Politechnica: Editura Academiei Române, 2004. Str. 277-280.
Romanian Journal of Technical Sciences, Applied Mechanics, Tome 49. ISBN 973-27-1102-7.
ISSN 0035-4074. [COBISS.SI-ID
9368598]
91.
ČUŠ, Franc.
Visokohitrostno rezanje in posebni postopki obdelav. 1. nat. Maribor: Fakulteta za strojništvo, 2004. 338 str., graf. prikazi. ISBN 86-435-0639-7.
[COBISS.SI-ID
53430785]
92.
ČUŠ, Franc.
Vpenjalne priprave za procese odrezavanja. 1. natis. Maribor: Fakutleta za strojništvo, 2004. VI, 220 str., ilustr., tabele.
ISBN 86-435-0608-7. [COBISS.SI-ID
52762369]
93.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Znižanje stroškov proizvoda v orodjarnah
s pomočjo vrednostne analize. In: POLAJNAR, Andrej (ed.), POJE, Janez (ed.), JUNKAR,
Mihael (ed.).
Poti k novemu napredku : dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož,
12.-14. oktober 2004. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo; v Mariboru:
Fakulteta za strojništvo, 2004. Str. 91-98. ISBN 961-6226-70-3. [COBISS.SI-ID
9105942]
2005
94.
ČUŠ, Franc, ŽUPERL, Uroš, MILFELNER, Matjaž, MURŠEC, Bogomir. An adaptive neuro-fuzzy
inference system for modeling of end-milling. In:
7th International Conference on Computer Integrated Manufacturing : intelligent manufacturing
systems. Woldwide Congress on Materials and Manufacturing Engineering and Technology, 16th
- 19th may 2005, Gliwice-Wisla, Poland. Gliwice: Silesian University of Technology,
Department of Engineering Processes Automation and Integrated Manufacturing Systems,
cop. 2005. Str. 41-46. ISBN 83-915011-3-2. [COBISS.SI-ID
9642262]
95.
ŽUPERL, Uroš.
Adaptive Steuerung von Fräsen durch neuronale Netzwerke : Gastvorlesung im DAAD Projekt
SÜOE 2, Budapesti Müszaki, Mechatronika, Optika és Müszertechnika Tanszék, Budapest,
10.03.2005. Budapest, 2005. [COBISS.SI-ID
9430294]
96.
ŽUPERL, Uroš, KIKER, Edvard. Adaptivno vodenje procesa oblikovnega frezanja z uporabo
nevronskih mrež. In: TOVORNIK, Boris (ed.), MUŠKINJA, Nenad (ed.).
Zbornik četrte konference Avtomatizacija v industriji in gospodarstvu, 7. in 8. april
2005, Maribor, Slovenija. Konferenca Avtomatizacija v industriji in gospodarstvu, 7. in 8. april 2005, Maribor,
Slovenija. Maribor: Društvo avtomatikov Slovenije, 2005. Str. 248-251. ISBN 86-435-0697-4.
[COBISS.SI-ID
9477910]
97.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš. Aktiviranje uporabe regionalnih inovativnih
potencialov. In: POLAJNAR, Andrej (ed.), POJE, Janez (ed.), JUNKAR, Mihael (ed.).
Odličnost orodjarn : dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož,
11.-13. oktober 2005. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo; v Mariboru:
Fakulteta za strojništvo, 2005. Str. 89-93. ISBN 961-6226-81-9. [COBISS.SI-ID
9980438]
98.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard, MILFELNER, Matjaž. Combined system for off-line
optimization and adaptive adjustment of cutting parameters during ball end milling
process. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 285-299.
ISBN 86-435-0677-X. [COBISS.SI-ID
9387798]
99.
ŽUPERL, Uroš, ČUŠ, Franc. Determination of characteristic technological and economic
parameters during metal cutting. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 267-284.
ISBN 86-435-0677-X. [COBISS.SI-ID
9387542]
100.
KIKER, Edvard, LESKOVAR, Albin, ŽUPERL, Uroš. Economical generation of compressed
air. In: HASSAN, Ibrahim (ed.), KROPE, Jurij (ed.).
Proceedings of the 3rd WSEAS/IASME International conferences: Heat transfer, thermal
engineering & environment, fluid mechanics and aerodynamics, Corfu Island, Greece,
August 20-22, 2005. [S.l.]: WSEAS: IASME, 2005. Str. 29-34. ISBN 960-8457-33-5. [COBISS.SI-ID
9814550]
101.
ČUŠ, Franc, ŽUPERL, Uroš, KIKER, Edvard, MILFELNER, Matjaž. Efficient end-milling
by using a combination of off-line feed rate optimization and adaptive force control.
In: DOBRZAŃSKI, Leszek A. (ed.).
Proceedings of the Eleventh International Scientific Conference, CAM3S'2005, Gliwice-Zakopane,
Poland, 6th - 9th December 2005. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 161-166. ISBN 83-89728-19-2. [COBISS.SI-ID
10147862]
102.
GEČEVSKA, Valentina, ČUŠ, Franc, KUZINOVSKI, Mikolaj, ŽUPERL, Uroš. Evolutionary computing
with genetic algorithm in manufacturing systems.
Machine engineering. 2005, vol. 5, no 3/4, str. 188-198. ISSN 1642-6568. [COBISS.SI-ID
10051094]
103.
GEČEVSKA, Valentina, ČUŠ, Franc, KUZINOVSKI, Mikolaj, ŽUPERL, Uroš. Experimental and
mathematical modeling of cutting tool wear in milling conditions. In: KULJANIĆ, Elso
(ed.).
AMST'05 : advanced manufacturing systems and technology : proceedings of the seventh
international conference, [held in Udine in June 2005]. seventh international conference, held in Udine in June 2005. Wien; New York: Springer,
cop. 2005. Str. 589-596. CISM courses and lectures, no. 486. ISBN 3-211-26537-6. [COBISS.SI-ID
10008342]
105.
ŽUPERL, Uroš, ČUŠ, Franc, MURŠEC, Bogomir, PLOJ, Anton. A generalized neural network
model of ball-end milling force system.
Journal of materials processing technology. June 2006, vol. 175, iss. 1/3, str. 98-108. ISSN 0924-0136.
http://dx.doi.org/10.1016/j.jmatprotec.2005.04.036,
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
9650966]
106.
MILFELNER, Matjaž, ŽUPERL, Uroš, ČUŠ, Franc. Generation of model of cutting forces
by the use of artificial intelligence. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 210-223.
ISBN 86-435-0677-X. [COBISS.SI-ID
9386006]
107.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Genetic equation for the
cutting force in ball-end milling. In: DOBRZAŃSKI, Leszek A. (ed.).
Proceedings of the 13th International Scientific Conference Achievements in Mechanical
& Materials Engineering, AMME'2005, Gliwice-Wisla, Poland, May 16-19, 2005. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 433-436. ISBN 83-89728-11-7. [COBISS.SI-ID
9666838]
108.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Genetic equation for the
cutting force in ball-end milling.
Journal of materials processing technology. 15. maj 2005, vol. 164-165, str. 1554-1560. ISSN 0924-0136.
http://dx.doi.org/10.1016/j.jmatprotec.2005.02.147,
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
9464854]
109.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Genetic equation for the
cutting force in ball-end milling. In: DOBRZAŃSKI, Leszek A. (ed.).
Worldwide Congress on Materials and Manufacturing Engineering Technology COMMENT'2005,
Gliwice-Wisła, Poland, 16th - 19th May, 2005 : programme & abstracts. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 114. ISBN 83-89728-12-5. [COBISS.SI-ID
8792603]
110.
ŽUPERL, Uroš.
Gestaltung und Anwendung sensorisierter spangebender Werkzeuge : Vortrag, Technische
Universität Ilmenau, Fakultät für Maschinenbau, 08. Februar 2005. Ilmenau, 2005. [COBISS.SI-ID
9371926]
111.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž, GUSEL, Leo. Implementation of a force
adaptive neural control system for end milling process. In: JĘDRZEJEWSKI, Jerzy (ed.).
Intelligent machines and factories. Wroclaw: Editorial institution of the Wroclaw board of federation of scientific
societies federation NOT, 2005. Vol. 5, no 1/2, str. 11-17. Machine engineering, Vol.
5, no. 1/2, 2005. ISSN 1642-6568. [COBISS.SI-ID
9498902]
112.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Intelligent force control in end-milling.
In: KLJAJIN, Milan (ed.), KATALINIĆ, Branko (ed.), BUDIĆ, Ivan (ed.).
Proceedings of the 4th DAAAM International conference on Advanced technologies for
developing countries on the occasion of 30th Anniversary of Josip Juraj Strossmayer
university of Osijek, September 21-24, 2005, Slavonski Brod, Croatia. Osijek: Josip Juraj Strossmayer University; Slavonski Brod: Mechanical engineering
faculty, 2005. Str. 345-348. ISBN 953-6048-30-2, ISBN 3-901509-50-X. [COBISS.SI-ID
9877014]
113.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Intelligent system for
machining and optimization of 3D sculptured surfaces with ball-end mill. In: DOBRZAŃSKI,
Leszek A. (ed.).
Proceedings of the Eleventh International Scientific Conference, CAM3S'2005, Gliwice-Zakopane,
Poland, 6th - 9th December 2005. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 674-679. ISBN 83-89728-19-2. [COBISS.SI-ID
8812059]
114.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Intelligent system for
machining and optimization of 3D sculptured surfaces with ball-end mill. In: DOBRZAŃSKI,
Leszek A. (ed.).
The Eleventh Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing
and Materials Science, CAM3S'2005, Gliwice-Zakopane, Poland, 6th - 9th December 2005
: programme & abstracts. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 49. ISBN 83-89728-17-6. [COBISS.SI-ID
8808219]
115.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš (scribe). Izhodišča organizacije uporabe
regionalnih inovativnih potencialov. In: KALUŽA, Jindřich (ed.).
Sinergija metodologij : zbornik 24. mednarodne konference o razvoju organizacijskih
znanosti, Slovenija, Portorož, 16.-18. marec 2005 = Synergy of methodologies : proceedings
of the 24th International Conference on Organizational Science Development, Slovenia,
Portorož, March 16-18, 2005. Kranj: Moderna organizacija, 2005. Str. 921-925. ISBN 961-232-175-2. [COBISS.SI-ID
9442326]
116.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard, MILFELNER, Matjaž. Kombiniran sistem ločenega
optimiranja in prilagodnega nastavljanja rezalnih parametrov med procesom oblikovnega
frezanja = A combined system for off-line optimization and adaptive adjustment of
the cutting parameters during a ball-end milling process.
Strojniški vestnik. 2005, letn. 51, št. 9, str. 542-559. ISSN 0039-2480.
Digitalna knjižnica Slovenije - dLib.si,
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
8511259]
117.
ŽUPERL, Uroš, KIKER, Edvard, ČUŠ, Franc. Load control in high speed milling. In: KATALINIĆ,
Branko (ed.).
Annals of DAAAM for 2005 & proceedings of the 16th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on young researchers and scientsts", University
of Rijeka, 19-22nd October 2005, Opatija, Croatia. Vienna: DAAAM International, 2005. Str. 401-402. ISBN 3-901509-46-1. [COBISS.SI-ID
9959190]
118.
GEČEVSKA, Valentina, ČUŠ, Franc, DUKOVSKI, Vladimir, ŽUPERL, Uroš, MILFELNER, Matjaž.
Machining process modeling in intelligent manufacturing systems using genetic programming.
In: GYENGE, Csaba (ed.).
Annals of MTeM for 2005 & Proceedings of the 7th International conference Modern technologies
in manufacturing, 6th -8th October 2005, [Cluj-Napoca]. Cluj-Napoca: Technical university, Faculty of machine building, Department of manufacturing
engineering, 2005. Str. 207-210. ISBN 973-9087-83-3. [COBISS.SI-ID
9940758]
119.
ČUŠ, Franc, BALIČ, Jože, KIKER, Edvard, ŽUPERL, Uroš. NC machining with on-line adaptive
force control. In: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.).
Computer integrated manufacturing and high speed machining. 10th International Scientific Conference on Production Engineering [also] CIM 2005,
June 15-17, 2005, Lumbarda, Korčula Croatia. [Zagreb]: Hrvatska udruga proizvodnog
strojarstva: = Croatian association of production engineering, [2005]. I-71-i-76.
[COBISS.SI-ID
9643286]
120.
BALIČ, Jože, ČUŠ, Franc, ŽUPERL, Uroš, KIKER, Edvard. Neural network for constant
force control of end milling. In: TRABASSO, Luís Gonzaga (ed.).
COBEM 2005 : proceedings of the 18th International congres of mechanical engineering,
6-11 November - Ouro Preto - Minas Gerias - Brazil. [S. l.: ABCM, 2003]. [6] f. [COBISS.SI-ID
10241046]
121.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Neuro-fuzzy system for predicting flank
wear during milling. In: KATALINIĆ, Branko (ed.).
DAAAM International scientific book 2005. Vienna: DAAAM International Vienna, cop. 2005. Str. 705-712. DAAAM International
scientific book. ISBN 3-901509-43-7. ISSN 1726-9687. [COBISS.SI-ID
10123798]
122.
MILFELNER, Matjaž, ŽUPERL, Uroš. Optimierung für Produktivitätsfortschritte und bessere
Umsätze. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 202-209.
ISBN 86-435-0677-X. [COBISS.SI-ID
9385750]
123.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. Prediction of tool flank wear in end
milling by using ANFIS system. In: GYENGE, Csaba (ed.).
Annals of MTeM for 2005 & Proceedings of the 7th International conference Modern technologies
in manufacturing, 6th -8th October 2005, [Cluj-Napoca]. Cluj-Napoca: Technical university, Faculty of machine building, Department of manufacturing
engineering, 2005. Str. 173-176. ISBN 973-9087-83-3. [COBISS.SI-ID
9939734]
124.
KIKER, Edvard, LESKOVAR, Albin, ŽUPERL, Uroš. Remote control and monitoring of compressor
unit.
IASME Transactions. 2005, vol. 2, iss.8, str. 1440-1447. ISSN 1790-031X. [COBISS.SI-ID
9784342]
125.
ŽUPERL, Uroš, ČUŠ, Franc. Solving the production process allocation problem by evolutionary
technique and utopian point method. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 244-255.
ISBN 86-435-0677-X. [COBISS.SI-ID
9387030]
126.
ŽUPERL, Uroš, ČUŠ, Franc. Tool wear estimation in end milling by using the adaptive
neuro-fuzzy system. In: ČUŠ, Franc (ed.).
Modeling and optimization of metal cutting. Maribor: Faculty of Mechanical Engineering, Laboratory for Cutting, 2005. Str. 256-266.
ISBN 86-435-0677-X. [COBISS.SI-ID
9387286]
127.
JANŽEKOVIČ, Marjan, MURŠEC, Bogomir, ČUŠ, Franc, PLOJ, Anton, JANŽEKOVIČ, Ignac, ŽUPERL,
Uroš. Use of machines for liquid manure aerating and mixing.
Journal of materials processing technology. 2005, vol. 162-163, št. 1, str. 744-750. ISSN 0924-0136. [COBISS.SI-ID
2195244]
128.
JANŽEKOVIČ, Marjan, MURŠEC, Bogomir, ČUŠ, Franc, PLOJ, Anton, JANŽEKOVIČ, Ignac, ŽUPERL,
Uroš. Use of machines for liquid manure aerating and mixing. In: DOBRZAŃSKI, Leszek
A. (ed.).
Proceedings of the 13th International Scientific Conference Achievements in Mechanical
& Materials Engineering, AMME'2005, Gliwice-Wisla, Poland, May 16-19, 2005. Gliwice: Silesian University of Technology, Institute of Engineering Materials and
Biomaterials, 2005. Str. 271-274. ISBN 83-89728-11-7. [COBISS.SI-ID
9665558]
2006
130.
ČUŠ, Franc, ŽUPERL, Uroš, KIKER, Edvard, MILFELNER, Matjaž. Adaptive controller design
for feedrate maximization of machining process.
Journal of achievements in materials and manufacturing engineering : JAMME. Jul.-Aug. 2006, vol. 17, iss. 1/2, str. 237-240. ISSN 1734-8412. [COBISS.SI-ID
10528278]
131.
MALIŠA, Viktorio, ŽUPERL, Uroš. An application of industrial robots and intelligent
conveyer system based on chaos technology in catering industry. In: KATALINIĆ, Branko
(ed.), et al.
Annals of DAAAM for 2006 & proceedings of the 17th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on mechatronics and robotics", 8-11th November
2006, Vienna, Austria. Vienna: DAAAM International, 2006. Str. 235-236. ISBN 3-901509-57-7. [COBISS.SI-ID
10876182]
133.
PLOJ, Anton, MURŠEC, Bogomir, ČUŠ, Franc, ŽUPERL, Uroš. Characterization of machines
for processing of waste materials.
Journal of materials processing technology. 2006, letn. 175, iss. 1/3, str. 338-343. ISSN 0924-0136.
http://dx.doi.org/10.1016/j.jmatprotec.2005.04.062. [COBISS.SI-ID
2396460]
134.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Digital adaptation of cutting parameters
during high speed milling. In: KATALINIĆ, Branko (ed.), et al.
Annals of DAAAM for 2006 & proceedings of the 17th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on mechatronics and robotics", 8-11th November
2006, Vienna, Austria. Vienna: DAAAM International, 2006. Str. 461-462. ISBN 3-901509-57-7. [COBISS.SI-ID
10877206]
135.
ŽUPERL, Uroš.
Digitalna adaptacija rezalnih pogojev med procesom frezanja : vabljeno predavanje
na Fakulteti za strojništvo Univerze v Ljubljani, 6. 11. 2006. Ljubljana, 2006. [COBISS.SI-ID
10881558]
136.
ČUŠ, Franc, ŽUPERL, Uroš, MILFELNER, Matjaž. Dynamic neural network approach for tool
cutting force modelling of end milling operations.
International journal of general systems. October 2006, vol. 35, no 5, str. 603-618. ISSN 0308-1079. [COBISS.SI-ID
10604310]
137.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Intelligent adaptive cutting force control
in end-milling.
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 2006, vol. 13, no. 1/2, str. 15-22. ISSN 1330-3651.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
10628630]
138.
MILFELNER, Matjaž, KOPAČ, Janez, ČUŠ, Franc, ŽUPERL, Uroš. Intelligent system for
machining and optimization of sculptured surfaces with ball-end milling.
Journal of achievements in materials and manufacturing engineering : JAMME. Jan.-Feb. 2006, vol. 14, iss. 1/2, str. 171-177. ISSN 1734-8412. [COBISS.SI-ID
10525974]
139.
DUŠEJ, Boris.
Krmiljenje modela proizvodnega procesa : diplomska naloga univerzitetnega študijskega
programa. Maribor: [B. Dušej], 2006. 57 str., ilustr. Fakulteta za elektrotehniko, računalništvo
in informatiko, Diplomska dela univerzitetnega študija, Mehatronika.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
10650390]
140.
BREZOČNIK, Zmago, ŠAFARIČ, Riko, KIKER, Edvard, PREDIN, Andrej, ŽUPERL, Uroš.
Mehatronika : vloga za pridobitev soglasja k skupnemu študijskemu programu prve stopnje
Fakultete za elektrotehniko, računalništvo in informatiko ter Fakultete za strojništvo
Univerze v Mariboru : akreditacija študijskega programa. Maribor: Fakulteta za elektrotehniko, računalništvo in informatiko: Fakulteta za
strojništvo, 2006. VI, 94 str. [COBISS.SI-ID
13134614]
141.
ŽUPERL, Uroš, ČUŠ, Franc. Optimization routine with improved multilevel perception.
In: ADAMCZAK, Stanisĺaw (ed.), OSANNA, P. Herbert (ed.).
Modern metrology in quality management systems : science report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2006. Str. 301-309. ISBN 978-83-88906-66-4.
[COBISS.SI-ID
11203862]
142.
ŽUPERL, Uroš, ŠAFARIČ, Riko.
Remote robotics lab - teleoperating a robot : lecture in the frame of DAAD SÜOE 2
project, presented at the University of Szeged, Faculty of science, 20. 2. 2006. Szeged, 2006. [COBISS.SI-ID
10647574]
143.
ŽUPERL, Uroš, ŠAFARIČ, Riko.
Remote robotics lab - teleoperating a robot : lecture in the frame of DAAD SÜOE 2
project, presented at the Viša tehnička škola u Subotici, Katedra za informatiku,
19. 2. 2006. Subotica, 2006. [COBISS.SI-ID
10647318]
2007
145.
GEČEVSKA, Valentina, ČUŠ, Franc, KUZINOVSKI, Mikolaj, ŽUPERL, Uroš. Evolutionary computing
with genetic algorithm in manufacturing systems. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina
(ed.).
Intelligent manufacturing systems. Skopje: Faculty of Mechanical Engineering, 2007. Str. 75-86. ISBN 978-9989-2701-0-9.
[COBISS.SI-ID
11328022]
146.
GEČEVSKA, Valentina, ČUŠ, Franc, KUZINOVSKI, Mikolaj, ŽUPERL, Uroš. Experimental and
mathematical modeling of cutting tool wear in milling conditions. In: ČUŠ, Franc (ed.),
GEČEVSKA, Valentina (ed.).
Intelligent manufacturing systems. Skopje: Faculty of Mechanical Engineering, 2007. Str. 121-129. ISBN 978-9989-2701-0-9.
[COBISS.SI-ID
11329046]
147.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Fuzzy control of feed drives in end-milling
processes. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2007 & proceedings of the 18th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on creativity, responsibility, and ethics of engineers",
24-27th October 2007, Zadar, Croatia. Vienna: DAAAM International, 2007. Str. 837-838. ISBN 3-901509-58-5. [COBISS.SI-ID
11822870]
148.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. High speed end-milling optimisation
using Particle Swarm Intelligence.
Journal of achievements in materials and manufacturing engineering : JAMME. Jun. 2007, vol. 22, iss. 2, str. 75-78. ISSN 1734-8412. [COBISS.SI-ID
11355158]
149.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. High-speed milling of light metals.
In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Intelligent manufacturing systems. Skopje: Faculty of Mechanical Engineering, 2007. Str. 103-109. ISBN 978-9989-2701-0-9.
[COBISS.SI-ID
11328534]
150.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. High-speed milling of light metals.
Journal of achievements in materials and manufacturing engineering : JAMME. Sep. 2007, vol. 24, iss. 1, str. 357-364. ISSN 1734-8412. [COBISS.SI-ID
11355926]
151.
ČUŠ, Franc, MILFELNER, Matjaž, ŽUPERL, Uroš, GEČEVSKA, Valentina. Impact of cutting
parameters on the quality of laser cutting. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2007 & proceedings of the 18th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on creativity, responsibility, and ethics of engineers",
24-27th October 2007, Zadar, Croatia. Vienna: DAAAM International, 2007. Str. 207-208. ISBN 3-901509-58-5. [COBISS.SI-ID
11821846]
153.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Izobraževanje slovenskih inženirjev za gospodarsko
globalizacijo. In: POLAJNAR, Andrej (ed.), POJE, Janez (ed.), JUNKAR, Mihael (ed.).
Orodjarne v svetu globalne sposobnosti : dobavitelj - kupec - orodjar : zbornik posvetovanja,
Portorož, 09.-11. oktober 2007. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo; v Mariboru:
Fakulteta za strojništvo, 2007. Str. 57-68. ISBN 978-961-6666-05-3. [COBISS.SI-ID
11812886]
157.
ČUŠ, Franc, ŽUPERL, Uroš. Optimisation of the cutting parameters in the high speed
milling process. In: ADAMCZAK, Stanisĺaw (ed.), STĘPIEŃ, Krzysztof (ed.).
ICPM 2007 : proceedings. IV. International Congress on Precision Machining 2007, September 25-28, 2007, Poland.
Kielce: University of Technology, 2007. Vol. 2, str. 13-16. ISBN 978-83-88906-91-6.
[COBISS.SI-ID
11753238]
158.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. Prediction of tool flank wear in end
milling by using ANFIS system. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Intelligent manufacturing systems. Skopje: Faculty of Mechanical Engineering, 2007. Str. 113-119. ISBN 978-9989-2701-0-9.
[COBISS.SI-ID
11328790]
159.
ČUŠ, Franc, ŽUPERL, Uroš. Produktionsmanagement in Kleinen und Mittleren Unternehmen.
Mechanical Engineering Scientific Journal. 2007, vol. 26, no. 1, str. 17-23. ISSN 1857-5293. [COBISS.SI-ID
12177430]
160.
ŽUPERL, Uroš, ČUŠ, Franc, MILFELNER, Matjaž. Racionalizacija procesa frezanja z metodo
nevronskih mrež. In: BALIČ, Jože (ed.), VEŽA, Ivica (ed.), ČUŠ, Franc (ed.).
Napredne proizvodne tehnologije. Maribor: Fakulteta za strojništvo; Split: Fakultet elektrotehnike, strojarstva i
brodogradnje, 2007. Str. 139-149. ISBN 86-435-0777-6. [COBISS.SI-ID
11013910]
161.
ČUŠ, Franc, GEČEVSKA, Valentina, BALIČ, Jože, ŽUPERL, Uroš, MILFELNER, Matjaž, TUNESKI,
Atanasko, PANDILOV, Zoran, MATEV, Filip.
Razvoj na evolutivni optimizacioni metodi primenuvani vo inteligentni proizvodni sistemi
= Development of evolutionary optimization methods applied in inteligent manufacturing
systems : Macedonian-Slovenian intergovernmental S&T cooperation programme for 2005-2007. Makedonija: Mašinski fakultet; Maribor: Faculty of Mechanical Engineering: = Fakulteta
za strojništvo, Inštitut za proizvodno strojništvo, 2007. 1 mapa (loč. pag.). [COBISS.SI-ID
12606230]
162.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. Simulation of complex machining process
by adaptive network based inference system. In: ABELE, Eberhard. (ed.), UDILJAK, Toma
(ed.), CIGLAR, Damir (ed.).
Computer integrated manufacturiong and high speed milling. 11th International Scientific Conference on production Engineering - CIM 2007, June
13-17, 2007, Biograd, Croatia. Zagreb: Hrvatska udruga proizvodnog strojarstva, cop.
2007. Str. 103-106. ISBN 978-953-97181-9-8. [COBISS.SI-ID
11397654]
163.
ČUŠ, Franc, NESLUŠAN, Miroslav, ŽUPERL, Uroš. Težave pri brušenju titanovih zlitin.
Euroteh : sodobne tehnologije. [Tiskana izd.]. jun. 2007, letn. 6, 3, str. 23-24. ISSN 1581-8608. [COBISS.SI-ID
11489814]
164.
BALIČ, Jože, ŽUPERL, Uroš, ČUŠ, Franc. Tool wear estimation with a self-learning adaptive
neuro-fuzzy system in copy milling. In:
Anais do Congresso. 4° Congresso Brasileiro de Engenharia de Fabricação [also] 4 COBEF, Estância de
São Pedro, 15a 18 de abril de 2007. [S. l.: ABCM, 2007]. 6 str. ISBN 978-85-86686-43-6,
ISBN 978-85-86686-44-3. [COBISS.SI-ID
11259158]
165.
ČUŠ, Franc, GEČEVSKA, Valentina, LOMBARDI, Franco, ŽUPERL, Uroš, DINEVSKI, Dejan.
Web based multimedia e-learning for applied technologies (WEBLAB) : weblab final report. Torino: Politecnico di Torino; Maribor: Faculty of Mechanical Engineering: = Fakulteta
za strojništvo, Inštitut za proizvodno strojništvo; Skopje: Faculty of Mechanical
Engineering, 2007. 1 mapa (loč. pag.). [COBISS.SI-ID
12606486]
2008
167.
BELNA, Srečko.
Analiza sodobnih postopkov odrezovanja z izračuni rezalnih parametrov : diplomsko
delo. Maribor: [S. Belna], 2008. VIII, 65 f., [1] f. pril., ilustr. [COBISS.SI-ID
12371734]
168.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. CNC end milling optimization using
evolutionary computation. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2008 & proceedings of the 19th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on next generation of intelligent systems and solutions",
22-25th October 2008, Trnava, Slovakia. Vienna: DAAAM International, 2008. Str. 347-348. ISBN 978-3-901509-68-1. [COBISS.SI-ID
12749590]
169.
Engineering review. ŽUPERL, Uroš (reviewer 2008). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 1995-.
ISSN 1330-9587. [COBISS.SI-ID
1954075]
170.
ŽUPERL, Uroš, ČUŠ, Franc. A fuzzy logic controller for a machine tool spindle and
feed drives. In: ADAMCZAK, Stanisĺaw (ed.), OSANNA, P. Herbert (ed.).
Geometrical product specification : a new tendency in the design and realization of
technological processes : science report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2008. Str. 243-248. ISBN 978-83-88906-57-2.
[COBISS.SI-ID
13330198]
171.
ADAMCZAK, Stanisĺaw (editor), OSANNA, P. Herbert (editor).
Geometrical product specification : a new tendency in the design and realization of
technological processes : science report. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2008. 264 str., ilustr. ISBN 978-83-88906-57-2.
[COBISS.SI-ID
16918792]
172.
ŽUPERL, Uroš.
Idejna zasnova mehanskega pogona za potrebe razširitve nabora preskusnih napetosti
v laboratoriju ICEM-TC : elaborat o izvedenem delu po pogodbi št.08/07. Maribor: Fakulteta za strojništvo, 2008. 9 f., ilustr. [COBISS.SI-ID
19776022]
173.
BREZOČNIK, Miran, JURKOVIĆ, Milan, KARABEGOVIĆ, Isak, BULJAN, Stipo, KARABEGOVIĆ,
Edina, MAHMIĆ, Mehmed, BAJRAMOVIĆ, Esad, DŽANIĆ, Amel, BALIČ, Jože, VAUPOTIČ, Boštjan,
FICKO, Mirko, KOVAČIČ, Miha, ŽUPERL, Uroš.
Inteligentni in integrirani tehnološki sistemi = Intelligent and integrated technological
systems : medvladni program znanstveno-tehnološkega sodelovanja med Republiko Slovenijo
in BiH za leto 2005-2006 (poročilo). Maribor: Fakulteta za strojništvo; Bihać: Tehnički fakultet, 2008. [4] f. [COBISS.SI-ID
14849046]
174.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Machining parameter optimization using ant
colony system. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2008 & proceedings of the 19th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on next generation of intelligent systems and solutions",
22-25th October 2008, Trnava, Slovakia. Vienna: DAAAM International, 2008. Str. 1561-1562. ISBN 978-3-901509-68-1. [COBISS.SI-ID
12756246]
176.
ČUŠ, Franc, ŽUPERL, Uroš. Model reference adaptive force and surface roughness control
in milling.
Journal of achievements in materials and manufacturing engineering : JAMME. Feb. 2008, vol. 26, iss. 2, str. 179-182. ISSN 1734-8412. [COBISS.SI-ID
12349206]
177.
ČUŠ, Franc, ŽUPERL, Uroš. Model reference-based machining force and surface roughness
control.
Journal of achievements in materials and manufacturing engineering : JAMME. Aug. 2008, vol. 29, iss. 2, str. 115-122. ISSN 1734-8412. [COBISS.SI-ID
12348438]
178.
ČUŠ, Franc, ŽUPERL, Uroš. Od konvencionalnega do visokohitrostnega struženja.
Euroteh : sodobne tehnologije. [Tiskana izd.]. jun. 2008, letn. 7, 3, str. 28-32. ISSN 1581-8608. [COBISS.SI-ID
12393238]
179.
ŽALEC, Gregor.
Organizacija in nadzor rezalnega orodja v proizvodnji : diplomsko delo. Maribor: [G. Žalec], 2008. IX, 59 f., ilustr. [COBISS.SI-ID
12886294]
180.
RAVLAN, Tilen.
Simulacija optimalne izdelave noža za rezanje jeklene pločevine : diplomsko delo. Maribor: [T. Ravlan], 2008. VIII, 91 f., [1] zganj. pril., ilustr. [COBISS.SI-ID
12892950]
181.
Strojarstvo : časopis za teoriju i praksu u strojarstvu. ŽUPERL, Uroš (reviewer 2007, 2008). Zagreb: Savez društava strojarskih i brodograđevnih
inženjera i tehničara Hrvatske, 1959-. ISSN 0562-1887.
http://hrcak.srce.hr/strojarstvo. [COBISS.SI-ID
121879]
182.
ČUŠ, Franc, ŽUPERL, Uroš. Uporaba suhega rezanja pri postopku čelnega frezanja. In:
POLAJNAR, Andrej (ed.), BRAČKO, Branko (ed.), JUNKAR, Mihael (ed.).
Organizacija kot gonilo poslovnih izboljšav : dobavitelj - kupec - orodjar : zbornik
posvetovanja, Portorož, 07.-09. oktober 2008. Orodjarstvo 2008, Portorož, 07.-09. oktober 2008. Ljubljana: GZS, Združenje kovinske
industrije, Odbor za orodjarstvo; v Mariboru: Fakulteta za strojništvo, 2008. Str.
159-164. ISBN 978-961-6666-13-8. [COBISS.SI-ID
12793622]
183.
PLOJ VIRTIČ, Mateja, ABERŠEK, Boris, ŽUPERL, Uroš. Using of acoustic models in mechanical
diagnostics.
Strojniški vestnik. 2008, letn. 54, št. 12, str. 874-882. ISSN 0039-2480.
http://www.sv-jme.eu/scripts/download.php?file=/data/upload/2008/SV-54-2008-12/7_ploj_zl.pdf,
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si. [COBISS.SI-ID
12874262]
2009
184.
ŽUPERL, Uroš, ČUŠ, Franc, KIKER, Edvard. Adaptive network based inference system for
estimation of flank wear in end-milling.
Journal of materials processing technology. Feb. 2009, vol. 209, iss. 3, str. 1504-1511. ISSN 0924-0136. DOI:
10.1016/j.jmatprotec.2008.04.002. [COBISS.SI-ID
12406806]
186.
ŽUPERL, Uroš, ČUŠ, Franc. Automation of milling fixture verification process. In:
ĆOSIĆ, Ilija (ed.).
Proceedings. 10th International Scientific Conference on Flexible Technologies - MMA 2009, Novi
Sad, October 9-10, 2009. Novi Sad: Faculty of Technical Sciences, Department for Production
Engineering, 2009. Str. 158-161, ilustr. ISBN 978-86-7892-223-7. [COBISS.SI-ID
13541398]
187.
ŽUPERL, Uroš. CNC end milling optimization using evolutionary computation. In: GEČEVSKA,
Valentina (ed.), ČUŠ, Franc (ed.).
Intelligent production systems way to competitiveness and innovative engineering. Skopje: Mašinski fakultet; Maribor: Faculty of Mechanical Engineering, 2009. Str.
143-147. ISBN 978-9989-2701-4-7. [COBISS.SI-ID
13715478]
188.
VUKELIĆ, Djordje, ŽUPERL, Uroš, HODOLIČ, Janko. Complex system for fixture selection,
modification, and design.
International journal of advanced manufacturing technology. 2009, vol. 45, no. 7/8, str. 731-748. ISSN 0268-3768. DOI:
10.1007/s00170-009-2014-y. [COBISS.SI-ID
13228822]
189.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Control simulation of virtual high speed end
milling. In:
CIM 2009. 12th International Scientific Conference on Production Engineering, June, 17-20
Biograd, Croatia. Zagreb: Hrvatska udruga proizvodnog strojarstva: = Croatian Association
of Production Engineering, cop. 2009. 4 str. [COBISS.SI-ID
13339670]
190.
ČUŠ, Franc, ŽUPERL, Uroš. Embedded load control system for milling processes. In:
ĆOSIĆ, Ilija (ed.).
Proceedings. 10th International Scientific Conference on Flexible Technologies - MMA 2009, Novi
Sad, October 9-10, 2009. Novi Sad: Faculty of Technical Sciences, Department for Production
Engineering, 2009. Str. 5-8, ilustr. ISBN 978-86-7892-223-7. [COBISS.SI-ID
13540374]
191.
ŽUPERL, Uroš. Fuzzy logic controller for spindle and feed drives of a machine tool.
In: GEČEVSKA, Valentina (ed.), ČUŠ, Franc (ed.).
Intelligent production systems way to competitiveness and innovative engineering. Skopje: Mašinski fakultet; Maribor: Faculty of Mechanical Engineering, 2009. Str.
191-196. ISBN 978-9989-2701-4-7. [COBISS.SI-ID
13716246]
192.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Hybrid ANFIS-ants system based optimisation
of turning parameters.
Journal of achievements in materials and manufacturing engineering : JAMME. Sep. 2009, vol. 36, iss. 1, str. 79-86. ISSN 1734-8412. [COBISS.SI-ID
13392662]
193.
ŽUPERL, Uroš, ČUŠ, Franc. Improving of turning process efficiency by using hybrid
ANFIS-ants system. In: KATALINIĆ, Branko (ed.).
DAAAM International scientific book 2009. Vienna: DAAAM International Vienna, 2009. Str. 233-240. DAAAM International scientific
book, vol. 8. ISBN 978-3-901509-69-8. ISSN 1726-9687. DOI:
10.2507/daaam.scibook.2009.25. [COBISS.SI-ID
13841942]
194.
ŽUPERL, Uroš, ČUŠ, Franc. Intelligent control of milling process by inverse modelling
and fuzzy feedback mechanism. In: ĆOSIĆ, Predrag (ed.), et al.
Conference proceedings. International Scientific Conference Management of Technology Step to Sustainable
Production, MOTSP 2009, 10-12 June 2009, Šibenik, Croatia. Zagreb: Faculty of Mechanical
Engineering and Naval Architecture; Koper: Faculty of Management, cop. 2009. Str.
136-141. ISBN 978-953-6313-09-9. [COBISS.SI-ID
13249046]
195.
GEČEVSKA, Valentina, ČUŠ, Franc, ŽUPERL, Uroš. Intelligent process planning by evolutionary
computing with genetic algorithms. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2009 & proceedings of the 20th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on theory, practice and education", 25-28th November
2009, Vienna, Austria. Vienna: DAAAM International, 2009. Str. 1451-1452. ISBN 978-3-901509-70-4. [COBISS.SI-ID
13652502]
196.
BALIČ, Jože, ČUŠ, Franc, ŽUPERL, Uroš. An intelligent system for cutting tool and
condition selection. In:
E-proceeding. Fourth International Conference on Intelligent Computing and Information Systems
(ICICIS 2009) March 19-22, 2009. Cairo, Egypt. Ain Shams: Faculty of Computer & Information
Science: = FCIS, 2009. Str. 432-437. ISBN 977-237-172-3. [COBISS.SI-ID
13147414]
198.
International Journal of Production Research. ŽUPERL, Uroš (reviewer 2009). London: Taylor & Francis, 1962-. ISSN 0020-7543. [COBISS.SI-ID
4673034]
199.
GEČEVSKA, Valentina, DUKOVSKI, Vladimir, PANDILOV, Zoran, VRTANOSKI, Gligorče, TUNESKI,
Atanasko, ČUŠ, Franc, ŽUPERL, Uroš, ČOSIĆ, Predrag, ANIČIĆ, Zoran, MICKOSKI, Hristijan,
KOSTOVSKI, Vladimir, GULEVSKI, Filip, DIMITROVSKA, Natalija, KAJMAKOVSKA, Bisera.
Istražuvanje i razvoj na metodologija za optimizacija na NC obrabotka so primena na
heuristički metodi : završen izveštaj za naučnoistražuvački proekt. Skopje: Mašinski fakultet, Univerzitet Sv. Kiril i Metodij, 2009. 43 str., graf.
prikazi. [COBISS.SI-ID
13547286]
200.
GEČEVSKA, Valentina, ČUŠ, Franc, ŽUPERL, Uroš. Object oriented approach in computer
aided process planning. In:
ICT Innovations 2009, September 28-30, 2009, Ohrid, Macedonia. [S. l.: s. n.], 2009. 1 str. [COBISS.SI-ID
13542934]
201.
ŽUPERL, Uroš.
On-line adaptation of cutting conditions in milling ; Force control in end-milling
; Automation of fixtures ; Optimal design of fixtures : predavanja zaposlenim na Departmanu
na Proizvodno mašinstvo i studentima doktorskih i master studija, Univerzitet u Novom
Sadu, Fakultet tehničkih nauka, Novi Sad, 22.06.2009 do 01.07.2009. Novi Sad, 2009. [COBISS.SI-ID
13412886]
202.
ŽUPERL, Uroš, ČUŠ, Franc. Optimiranje in adaptivno vodenje procesov odrezavanja z
nevronskimi mrežami. In: POLAJNAR, Andrej (ed.), BRAČKO, Branko (ed.).
Trajnostni razvoj - pot iz krize : [dobavitelj - kupec - orodjar] : zbornik posvetovanja,
Portorož, 7-8. oktober 2009. Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo in strojegradnjo,
2009. Str. 136-141. ISBN 978-961-6666-28-2. [COBISS.SI-ID
13546006]
203.
ŽUPERL, Uroš. Optimiranje operacij odrezavanja z nevronskimi mrežami.
IRT 3000 : inovacije, razvoj, tehnologije. Dec. 2009, letn. 4, 24 (6), str. 58-62. ISSN 1854-3669. [COBISS.SI-ID
13779990]
204.
ČUŠ, Franc, ŽUPERL, Uroš. Particle swarm intelligence based optimisation of high speed
end-milling.
Archives of computational materials science and surface engineering. 2009, vol. 1, iss. 3, str. 148-154. ISSN 1689-9210. [COBISS.SI-ID
13224214]
205.
DETIČEK, Edvard, ŽUPERL, Uroš. Position control of hydraulic drives in machine tools
by fuzzy self-learning controller. In: ĆOSIĆ, Ilija (ed.).
Proceedings. 10th International Scientific Conference on Flexible Technologies - MMA 2009, Novi
Sad, October 9-10, 2009. Novi Sad: Faculty of Technical Sciences, Department for Production
Engineering, 2009. Str. 90-93, ilustr. ISBN 978-86-7892-223-7. [COBISS.SI-ID
13541142]
206.
ČUŠ, Franc, ŽUPERL, Uroš. PSO assisted adaptive force control in milling. In: KATALINIĆ,
Branko (ed.).
DAAAM International scientific book 2009. Vienna: DAAAM International Vienna, 2009. Str. 17-24. DAAAM International scientific
book, vol. 8. ISBN 978-3-901509-69-8. ISSN 1726-9687. DOI:
10.2507/daaam.scibook.2009.03. [COBISS.SI-ID
13841174]
208.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. Self-learning control strategy with
application to milling system. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2009 & proceedings of the 20th International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on theory, practice and education", 25-28th November
2009, Vienna, Austria. Vienna: DAAAM International, 2009. Str. 451-452. ISBN 978-3-901509-70-4. [COBISS.SI-ID
13651478]
209.
ČUŠ, Franc, ŽUPERL, Uroš, GEČEVSKA, Valentina. Simulation of complex machining process
by adaptive network based inference system. In: GEČEVSKA, Valentina (ed.), ČUŠ, Franc
(ed.).
Intelligent production systems way to competitiveness and innovative engineering. Skopje: Mašinski fakultet; Maribor: Faculty of Mechanical Engineering, 2009. Str.
93-99. ISBN 978-9989-2701-4-7. [COBISS.SI-ID
13713942]
210.
BALIČ, Jože, ŽUPERL, Uroš. Tool wear estimation with a self-learning adaptive neuro-fuzzy
system in copy milling. In: GEČEVSKA, Valentina (ed.), ČUŠ, Franc (ed.).
Intelligent production systems way to competitiveness and innovative engineering. Skopje: Mašinski fakultet; Maribor: Faculty of Mechanical Engineering, 2009. Str.
197-204. ISBN 978-9989-2701-4-7. [COBISS.SI-ID
13716758]
2010
211.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Adaptation of cutting parameters for
optimal turning of high quality Al alloys. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina
(ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 117-129. ISBN 978-961-248-250-3. [COBISS.SI-ID
14608662]
212.
ŽUPERL, Uroš, REIBENSCHUH, Marko. Adaptive learning control and optimization system
in end-milling. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 45-51. ISBN 978-961-248-250-3. [COBISS.SI-ID
14606614]
213.
ČUŠ, Franc, REIBENSCHUH, Marko, ŽUPERL, Uroš. Analiza suhega rezanja pri postopku
čelnega frezanja. In: KOPAČ, Janez (ed.), ČUŠ, Franc (ed.).
Sistemi na ključ - priložnosti dodane vrednosti : zbornik posvetovanja. 32. posvetovanje Orodjarstvo in strojegradnja 2010, Ljubljana, 6.-7. oktober 2010.
Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo in strojegradnjo,
2010. Str. 103-108. [COBISS.SI-ID
14452758]
214.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko, ZIERER, Janko, FIJAVŽ, Renato, STEPIŠNIK,
Stanko.
Analiza uvajanja visokohitrostnih obdelav za orodja večjih dimenzij. Maribor: Fakulteta za strojništvo; Celje: EMO Orodjarna, 2010. 58 f., ilustr. [COBISS.SI-ID
14703126]
215.
ČUŠ, Franc, GEČEVSKA, Valentina, ŽUPERL, Uroš. ANFIS process predicator and neural
network decision system for monitoring tool breakage in milling operations. In: ČUŠ,
Franc (ed.), GEČEVSKA, Valentina (ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 13-25. ISBN 978-961-248-250-3. [COBISS.SI-ID
14606102]
218.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Comparison of different optimization
and process control procedures. In: ĆOSIĆ, Predrag (ed.), BARIĆ, Gordana (ed.), ĐUKIĆ,
Goran (ed.).
MOTSP 2010 : Management of technology step to sustainable production : conference
proceedings. International Scientific Conference Management of Technology Step to Sustainable
Production, MOTSP 2010, 2-4 June 2010, Rovinj, Croatia. Zagreb: Faculty of Mechanical
Engineering and Naval Architecture, cop. 2010. [8] str., ilustr. ISBN 978-953-7738-09-9.
[COBISS.SI-ID
14174742]
219.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Control algorithm simulation of a virtual milling
process. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 67-74. ISBN 978-961-248-250-3. [COBISS.SI-ID
14608406]
220.
ČUŠ, Franc, BALIČ, Jože, ŽUPERL, Uroš. Control strategy of constant milling force
system and metal removal rate maximizion. In: FILIPE, Joaquim (ed.), CETTO, Juan Andrade
(ed.), FERRIER, Jean-Louis (ed.).
ICINCO 2010 : proceedings of the 7th International Conference on Informatics in Control,
Automation and Robotics, [and] ANNIP, Artificial Neural Networks and Intelligent Information
Processing Workshop, [and] special session IVC & ITS Intelligent Vehicle Controls
& Intelligent Transportation System, Funchal, Madeira, Portugal, 15-18 June 2010. 7th International Conference on Informatics in Control, Automation and Robotics
[ALSO] ICINCO 2010 [and] ANNIP, Artificial Neural Networks and Intelligent Information
Processing Workshop, [and] special session IVC & ITS Intelligent Vehicle Controls
& Intelligent Transportation System, Funchal, Madeira, Portugal, 15-18 June 2010.
[S. l.]: SciTePress - Science and Technology Publications, 2010. Vol. 1, str. 265-268.
ISBN 978-989-8425-00-3, ISBN 978-989-8425-01-0, ISBN 978-989-8425-02-7. [COBISS.SI-ID
14293782]
221.
ŽUPERL, Uroš, ČUŠ, Franc. The development of an intelligent fixturing system. In:
ADAMCZAK, Stanisĺaw (ed.).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project PL-0007 : Monograph = reviewrs: Stanisław
Adamczak ... [et al.]. Kielce: Kielce University of Technology, cop. 2010. Str. 225-233. ISBN 978-83-88906-56-5.
[COBISS.SI-ID
19776790]
222.
ŽUPERL, Uroš, ČUŠ, Franc. The development of an intelligent fixturing system.
Výrobné inžinierstvo. 2010, vol. 9, no. 4, str. 5-7, 15, ilustr. ISSN 1335-7972. [COBISS.SI-ID
14605078]
223.
ŽUPERL, Uroš. Fleksibilni vpenjalni sistem z adaptivno regulacijo vpenjalnih sil.
In: KOPAČ, Janez (ed.), ČUŠ, Franc (ed.).
Sistemi na ključ - priložnosti dodane vrednosti : zbornik posvetovanja. 32. posvetovanje Orodjarstvo in strojegradnja 2010, Ljubljana, 6.-7. oktober 2010.
Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo in strojegradnjo,
2010. Str. 109-113. [COBISS.SI-ID
14453014]
224.
DETIČEK, Edvard, ŽUPERL, Uroš. A fuzzy self-learning position control of hydraulic
drives in machine tools. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 59-66. ISBN 978-961-248-250-3. [COBISS.SI-ID
14608150]
225.
BREZOČNIK, Miran, JURKOVIĆ, Milan, BALIČ, Jože, FICKO, Mirko, DRSTVENŠEK, Igor, VAUPOTIČ,
Boštjan, VALENTAN, Bogdan, BREZOVNIK, Simon, ŽUPERL, Uroš, KARABEGOVIĆ, Isak, BULJAN,
Stipo, KARABEGOVIĆ, Edina, MAHMIĆ, Mehmed, HODŽIĆ, Damir, DŽANIĆ, Amel.
Inteligentni proizvodni stroji in sistemi : znanstvenoraziskovalno sodelovanje med
Republiko Slovenijo in Bosno in Hercegovino, 2008-2009 = Intelligent manufacturing
machines and systems : scientific research cooperation between the Republic of Slovenia
and Bosnia and Herzegovina, 2008-2009, project report for 2008-2009. Maribor: Fakulteta za strojništvo; Bihać: Tehnički fakultet, 2010. [8] f. [COBISS.SI-ID
14849302]
226.
ŽUPERL, Uroš.
Intelligent adaptive control systems ; Mechatronics ; Automatization of clamping devices
: predavanja zaposlenim na Departmanu na Proizvodno mašinstvo i studentima doktorskih
i master studija, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Novi Sad, 01.06-19.06.2010. Novi Sad, 2010. [COBISS.SI-ID
14346774]
227.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko, FIJAVŽ, Renato, STEPIŠNIK, Stanko.
Izdelava začetnih raziskav in načrta testiranj orodij za projekt B-super. Maribor: Fakulteta za strojništvo; Celje: EMO Orodjarna, 2010. 107 f., ilustr. [COBISS.SI-ID
14531094]
228.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Machining of hard steel alloys with
new prototypes of cutting tools. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on interdisciplinary solutions", 20-23rd October,
Zadar, Croatia. Vienna: DAAAM International, 2010. Str. 1157-1158. Annals of DAAAM & Proceedings.
ISBN 978-3-901509-73-5. ISSN 1726-9679. [COBISS.SI-ID
14500374]
229.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Neural network based control algorithm in robotised
unmanned flexible manufacturing system. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM symposium "Intelligent
manufacturing & Automation: "Focus on interdisciplinary solutions", 20-23rd October,
Zadar, Croatia. Vienna: DAAAM International, 2010. Str. 305-306. Annals of DAAAM & Proceedings.
ISBN 978-3-901509-73-5. ISSN 1726-9679. [COBISS.SI-ID
14500630]
230.
GEČEVSKA, Valentina, ČUŠ, Franc, ŽUPERL, Uroš. Object oriented approach in computer
aided process planning. In: DAVCEV, Danco (ed.), GÓMEZ, Jorge Marx (ed.).
ICT innovations 2009. Berlin; Heidelberg: Springer-Verlag, cop. 2010. Str. 429-438. ISBN 978-3-642-10781-8,
ISBN 3-642-10781-8, ISBN 978-3-642-10780-1, ISBN 3-642-10780-X. DOI:
10.1007/978-3-642-10781-8_44. [COBISS.SI-ID
14041366]
233.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko. Principi snovanja vpenjalnih priprav
za postopke odrezavanja. In: PERME, Tomaž (ed.), ŠVETAK, Darko (ed.), BALIČ, Jože
(ed.).
Vir znanja in izkušenj za stroko : zbornik foruma. Industrijski forum IRT, Portorož, 7.-8. junij 2010. Škofljica: Profidtp, 2010. Str.
219-225. ISBN 978-961-92659-1-8. [COBISS.SI-ID
14187030]
234.
ŽUPERL, Uroš. Remote control of compressor unit and pneumatic supply system design.
In:
KOD 2010 : proceedings. The Sixth International Symposium about Forming and Design in Mechanical Engineering,
KOD 2010, 29-30 September 2010, Palić, Serbia. Novi Sad: Faculty of Technical Sciences,
2010. Str. 337-340. ISBN 978-86-7892-278-7. [COBISS.SI-ID
14447894]
235.
ADAMCZAK, Stanisĺaw (editor).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project PL-0007 : Monograph = reviewrs: Stanisław
Adamczak ... [et al.]. Kielce: Kielce University of Technology, cop. 2010. 252 str., graf. prikazi. ISBN
978-83-88906-56-5. [COBISS.SI-ID
19776278]
236.
ŽUPERL, Uroš.
SISOSTAB : program za določevanje stabilnosti SISO-regulacijskih sistemov. Verzija 2.0. Maribor: Fakulteta za strojništvo, Laboratorij za mehatroniko, 2010.
1 CD-ROM. [COBISS.SI-ID
14020886]
237.
ŽUPERL, Uroš, KOPAČ, Janez, REIBENSCHUH, Marko. Tool condition monitoring in unmanned
flexible manufacturing system. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Innovative production systems key to future intelligent manufacturing. Maribor: Faculty of Mechanical Engineering; Skopje: Faculty of Mechanical Engineering,
2010. Str. 39-43. ISBN 978-961-248-250-3. [COBISS.SI-ID
14606358]
2011
243.
Engineering applications of artificial intelligence. ŽUPERL, Uroš (reviewer 2011). [Print ed.]. Swansea: Pineridge Press, 1988-. ISSN
0952-1976. [COBISS.SI-ID
25396224]
244.
ČUŠ, Franc, ŽUPERL, Uroš, BALIČ, Jože. Feedforward-feedback control system of end
milling system based on neural network. In: ABELE, Eberhard (ed.), UDILJAK, Toma (ed.),
CIGLAR, Damir (ed.).
Computer integrated manufacturing and high speed machining. 13th International Scientific Conference on Production Engineering - CIM 2011, June
16-18, 2011, Biograd, Croatia. Zagreb: Hrvatska udruga proizvodnog strojarstva, cop.
2011. Str. 75-78. ISBN 978-953-7689-01-8. [COBISS.SI-ID
15106070]
246.
ČUŠ, Franc, ŽUPERL, Uroš. GP-based system for on-line adapting of process parameters
in end milling. In: JUNKAR, Mihael (ed.), et al.
MIT & SLIM 2011 : proceedings of the 11th International Conference on Management of
Innovative Technologies & 2nd International Conference on Sustainable Life in Manufacturing,
Fiesa, Slovenia, September 25th - 27th, 2011. Ljubljana: TAVO, Slovene Society for Abrasive Water Jet Technology, 2011. Str. 147-150,
ilustr. ISBN 978-961-6536-57-8. [COBISS.SI-ID
15417622]
247.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko, STEPIŠNIK, Stanko, FIJAVŽ, Renato, MILFELNER,
Matjaž.
Hibridno adaptivni nadzor procesa frezanja z oblikovnim frezalom = Hybrid adaptive
control of milling process by end milling cutter : končno poročilo : javni razpis
za podporo malim in srednje velikim podjetjem, ki izvajajo raziskave in razvoj - program
EUROSTARS, v okviru iniciative EUREKA : trajanje projekta 2008-2011. Maribor: Fakulteta za strojništvo, 2011. 1 mapa (loč. pag.), graf. prikazi. Raziskovalni
program Dinamični, inteligentni in povezani sistemi in naprave. [COBISS.SI-ID
14841878]
249.
DETIČEK, Edvard, ŽUPERL, Uroš. An intelligent electro-hydraulic servo drive positioning.
Strojniški vestnik. maj 2011, vol. 47, no. 5, str. 394-404, ilustr. ISSN 0039-2480. DOI:
10.5545/sv-jme.2010.081. [COBISS.SI-ID
14997526]
250.
ŽUPERL, Uroš. Intelligent fixturing control strategy.
Technologické inžinierstvo. 2011, vol. 8, no. 1, str. 41-43. ISSN 1336-5967. [COBISS.SI-ID
15774486]
251.
ŽUPERL, Uroš, ČUŠ, Franc. Intelligent fixturing system with clamping force control.
In: ĆOSIĆ, Predrag (ed.), BARIĆ, Gordana (ed.), ĐUKIĆ, Goran (ed.).
Conference proceedings. 3rd International Scientific Conference Management of Technology Step to Sustainable
Production, MOTSP 2011, 8-10 June 2011, Bol, Island Brac, Croatia. Zagreb: Faculty
of Mechanical Engineering and Naval Architecture, cop. 2011. Str. 305-312. ISBN 978-953-7738-10-5.
[COBISS.SI-ID
15068438]
252.
ŽUPERL, Uroš.
Intelligent machine tool control systems ; Mechatronics and machine tools ; Automatization
of fixtures in milling : predavanja zaposlenima na Departmanu na Proizvodno mašinstvo
i studentima doktorskih i master studija, Univerzitet u Novom Sadu, Fakultet tehničkih
nauka, Novi Sad, 01. 06-30. 06. 2011. 2011. [COBISS.SI-ID
15197206]
253.
International journal of engineering, science and technology. ŽUPERL, Uroš (reviewer 2011). [Print ed.]. Lagos: Multicraft Limited, 2009-. ISSN
2141-2820.
http://www.ijest.info/. [COBISS.SI-ID
14906134]
254.
ČUŠ, Franc, KOPAČ, Janez, REIBENSCHUH, Marko, ŽUPERL, Uroš. Iskanje in optimiranje
rezalnih parametrov za novo razvite aluminijeve zlitine. In: KOPAČ, Janez (ed.), ČUŠ,
Franc (ed.).
Razvoj z velikim R : [avtomatizacija - orodja - stroji] : zbornik posvetovanja, Ljubljana,
5.-6. oktober 2011. [33. posvetovanje] Orodjarstvo in strojegradnja 2011, Ljubljana, 5.-6. oktober 2011.
Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo in strojegradnjo,
2011. Str. 33-38. [COBISS.SI-ID
15415062]
257.
ŽUPERL, Uroš.
Krmilna tehnika : 10 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2011/2012, zimski semester. [COBISS.SI-ID
21912086]
258.
Machining science and technology. ŽUPERL, Uroš (reviewer 2011). New York, N.Y.: Marcel Dekker, Inc. ISSN 1091-0344.
[COBISS.SI-ID
1579797]
259.
ŽUPERL, Uroš.
Mehatronski sistemi : 3 ure predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2011/2012, zimski semester. [COBISS.SI-ID
21912342]
260.
ČUŠ, Franc, ŽUPERL, Uroš. Merged neural decision system and ANFIS wear predictor for
supporting tool condition monitoring.
Transactions of FAMENA. 2011, vol. 35, iss. 1, str. 13-26. ISSN 1333-1124. [COBISS.SI-ID
14937110]
264.
ŽUPERL, Uroš, ČUŠ, Franc. Nadgrajevanje modernih CNC obdelovalnih strojev z nadzornimi
sistemi. In: KOPAČ, Janez (ed.), ČUŠ, Franc (ed.).
Razvoj z velikim R : [avtomatizacija - orodja - stroji] : zbornik posvetovanja, Ljubljana,
5.-6. oktober 2011. [33. posvetovanje] Orodjarstvo in strojegradnja 2011, Ljubljana, 5.-6. oktober 2011.
Ljubljana: GZS, Združenje kovinske industrije, Odbor za orodjarstvo in strojegradnjo,
2011. Str. 51-56. [COBISS.SI-ID
15415830]
265.
ŽUPERL, Uroš, ČUŠ, Franc, REIBENSCHUH, Marko. Neural control strategy of constant
cutting force system in end milling : review.
Robotics and computer-integrated manufacturing. June 2011, vol. 27, iss. 3, str. 485-493. ISSN 0736-5845. DOI:
10.1016/j.rcim.2010.10.001. [COBISS.SI-ID
14702614]
266.
ŽUPERL, Uroš, ČUŠ, Franc. Neural network algorithm for on-line tool breakage detection.
In: TRAJANOVIĆ, Miroslav (ed.).
Proceedings. 34th International Conference of Production Engineering, September 28-30. 2011,
Niš, Serbia. 1. izd. Niš: Mašinski fakultet; = Niš: Faculty of Mechanical Engineering,
2011. Str. 29-32. ISBN 978-86-6055-019-6. [COBISS.SI-ID
15376918]
267.
DETIČEK, Edvard, ŽUPERL, Uroš. Position control of hydraulic drives in machine tools
by fuzzy self-learning controller.
Journal of production engineering. 2011, vol. 14, no. 1, str. 23-26. ISSN 1821-4932. [COBISS.SI-ID
15200278]
269.
ČUŠ, Franc, FIJAVŽ, Renato, BALIČ, Jože, KOPAČ, Janez, ŽUPERL, Uroš, REIBENSCHUH,
Marko.
Razvoj postopkov optimizacije modernih procesov odrezavanja za potrebe orodjarne EMO
: elaborat o izvedenem delu po pogodbi št.: P-101-IKO-19/2010-JF. Maribor: Fakulteta za strojništvo, 2011. 107 f., graf. prikazi. [COBISS.SI-ID
14872086]
270.
ŽUPERL, Uroš, ČUŠ, Franc, BALIČ, Jože. Real time control of clamping in an intelligent
fixturing system. In: KATALINIĆ, Branko (ed.).
Annals of DAAAM for 2011 & proceedings of the 22nd International DAAAM symposium "Intelligent
manufacturing & Automation: "Power of knowledge and creativity", 23-26th November
2011, Vienna, Austria. Vienna: DAAAM International, 2011. Str. 243-244. Annals of DAAAM & Proceedings.
ISBN 978-3-901509-83-4. ISSN 1726-9679. [COBISS.SI-ID
15550998]
273.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko, VIDOVIČ, Marjan, GUMZEJ, Zlatko.
Struženje aluminijastih palic in hlajenje z oljem : končno poročilo projekta : trajanje
projekta september 2010, marec 2011. Maribor: Fakulteta za strojništvo, 2011. 18 f., graf. prikazi. [COBISS.SI-ID
19781654]
274.
ŽUPERL, Uroš.
Tehniška kibernetika : 10 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2011/2012, zimski semester. [COBISS.SI-ID
21913110]
275.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Turning of high quality Al alloys with
minimum costs. In: ĆOSIĆ, Predrag (ed.), BARIĆ, Gordana (ed.), ĐUKIĆ, Goran (ed.).
Conference proceedings. 3rd International Scientific Conference Management of Technology Step to Sustainable
Production, MOTSP 2011, 8-10 June 2011, Bol, Island Brac, Croatia. Zagreb: Faculty
of Mechanical Engineering and Naval Architecture, cop. 2011. Str. 354-361. ISBN 978-953-7738-10-5.
[COBISS.SI-ID
15068694]
277.
ŽUPERL, Uroš, ČUŠ, Franc, VUKELIĆ, Djordje. Variable clamping force control for an
inteligen fixturing.
Journal of production engineering. 2011, vol. 14, no. 1, str. 19-22. ISSN 1821-4932. [COBISS.SI-ID
15200022]
279.
Zeitschrift für Naturforschung. A, A journal of physical sciences. ŽUPERL, Uroš (reviewer 2011). Tübingen: Verlag der Zeitschrift für Naturforschung.
ISSN 0932-0784. [COBISS.SI-ID
327490]
2012
280.
ČUŠ, Franc, ŽUPERL, Uroš, REIBENSCHUH, Marko. Applying new data acquisition method
for chip detection. In:
Proceedings. The Seventh International Symposium about machine and industrial design in mechanical
engineering, KOD 2012, 24-26 May, 2012, Balatonfüred, Hungary. Novi Sad: Faculty of
Technical Sciences, 2012. Str. 477-480, ilustr. ISBN 978-86-7892-399-9. [COBISS.SI-ID
16096022]
281.
Arabian journal for science and engineering. Section B, Engineering. ŽUPERL, Uroš (reviewer 2012). Dhahran: King Fahd University for Petroleum and Minerals.,
1996-2011. ISSN 1319-8025. [COBISS.SI-ID
515058969]
283.
REIBENSCHUH, Marko, ŽUPERL, Uroš, ČUŠ, Franc. Developing and implementing a new visual
monitoring system for machining. In: KATALINIĆ, Branko (ed.).
23rd DAAAM International symposium Conference papers. Vienna: DAAAM International, 2012. Str. 273-276. Annals of DAAAM & Proceedings,
Vol. 23, no. 1. ISBN 978-3-901509-91-9. ISSN 2304-1382. [COBISS.SI-ID
16398358]
284.
ŽUPERL, Uroš, ČUŠ, Franc. Fixture analysis module, an essential element of the intelligent
fixturing system. In: ĆOSIĆ, Ilija (ed.), KOSEC, Borut (ed.).
Proceedings. 11th International Scientific Conference MMA 2012 - Advanced Production Technologies,
Novi Sad, 20-21 September, 2012. Novi Sad: Faculty of Technical Sciences, Departmant
of Production Engineering, 2012. Str. 203-206. ISBN 978-86-7892-429-3. [COBISS.SI-ID
16295958]
285.
International journal of advanced robotic systems. ŽUPERL, Uroš (reviewer 2012). Wien: Institute for Production Engineering. Intelligent
Manufacturing Systems. Vienna University of Technology, 2004-2009. ISSN 1729-8806.
http://www.intechweb.org/journal.php?id=3. [COBISS.SI-ID
9145366]
286.
International journal of manufacturing technology and management. ŽUPERL, Uroš (reviewer 2012). Genève; Milton Keynes: Inderscience Enterprises. ISSN
1368-2148. [COBISS.SI-ID
512563225]
287.
ŽUPERL, Uroš. Inverse process modeling and fuzzy feedback for adaptive spindle load
control in milling. In:
Proceedings. The Seventh International Symposium about machine and industrial design in mechanical
engineering, KOD 2012, 24-26 May, 2012, Balatonfüred, Hungary. Novi Sad: Faculty of
Technical Sciences, 2012. Str. 473-476, ilustr. ISBN 978-86-7892-399-9. [COBISS.SI-ID
16095766]
288.
ŽUPERL, Uroš.
Krmilna tehnika : 3 ure predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2012/2013, zimski semester. [COBISS.SI-ID
21912598]
289.
ŽUPERL, Uroš.
Mehatronski krmilni in servo sistemi : 3 ure predavanj tujim študentom v okviru programa
mednarodne izmenjave študentov Erasmus+, študijsko leto 2012/2013, zimski semester. [COBISS.SI-ID
21912854]
290.
ŽUPERL, Uroš.
Mehatronski sistemi : 6 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2012/2013, zimski semester. [COBISS.SI-ID
21913622]
291.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Milling tool testing - using conservative
values for cutting parameters. In: ĆOSIĆ, Predrag (ed.), BARIĆ, Gordana (ed.).
Conference proceedings. 4th International Scientific Conference Management of Technology Step to Sustainable
Production, MOTSP 2012, 14-16 June 2012, Zadar, Croatia. Zagreb: Croatian Association
for PLM, cop. 2012. [6] str. [COBISS.SI-ID
16093974]
292.
ŽUPERL, Uroš, ČUŠ, Franc, REIBENSCHUH, Marko. Modeling and adaptive force control
of milling by using artificial techniques.
Journal of intelligent manufacturing. 2012, vol. 23, no. 5, str. 1805-1815. ISSN 0956-5515. DOI:
10.1007/s10845-010-0487-z. [COBISS.SI-ID
14723350]
294.
REIBENSCHUH, Marko, ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. New user interface for
detecting edge wear on cutting tools. In: ĆOSIĆ, Ilija (ed.), KOSEC, Borut (ed.).
Proceedings. 11th International Scientific Conference MMA 2012 - Advanced Production Technologies,
Novi Sad, 20-21 September, 2012. Novi Sad: Faculty of Technical Sciences, Departmant
of Production Engineering, 2012. Str. 171-174. ISBN 978-86-7892-429-3. [COBISS.SI-ID
16295702]
295.
ŽUPERL, Uroš.
Off-line feedrate optimization and neural force control of milling process (12) ;
Fuzzy control strategy for an adaptive load control in end-milling (12) ; Automation
of cutting processes (12) ; Automation of milling fixture verification process (12)
: 48 sati (12x4) predavanja zaposlenima na Departmanu na Proizvodno mašinstvo i studentima
doktorskih i master studija, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Novi
Sad, 04.06-30.06.2012. 2012. [COBISS.SI-ID
16105494]
296.
FARRÉ FARREIRO, Jordi.
Offline optimization in Excel for cutting parameters during high speed milling : master
thesis. Maribor: [J. Farré Farreiro], 2012. 51 f., ilustr. [COBISS.SI-ID
18895382]
299.
ŽUPERL, Uroš, ČUŠ, Franc. System for off-line feedrate optimization and neural force
control in end milling.
International journal of adaptive control and signal processing. Feb. 2012, vol. 26, iss. 2, str. 105-123. ISSN 0890-6327. DOI:
10.1002/acs.1277. [COBISS.SI-ID
15798550]
300.
ŽUPERL, Uroš.
Tehniška kibernetika : 3 ure predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2012/2013, zimski semester. [COBISS.SI-ID
21913366]
302.
REIBENSCHUH, Marko, ČUŠ, Franc, ŽUPERL, Uroš. Using LabVIEW software for development
of new data acquisition software.
Machine design : the journal of Faculty of Technical Sciences. 2012, vol. 4, no. 3, str. 157-160, ilustr. ISSN 1821-1259.
http://www.mdesign.ftn.uns.ac.rs/pdf/2012/no3/157-160.pdf,
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
16415766]
2013
305.
ČUŠ, Franc, ŽUPERL, Uroš. Adaptive network based inference system for estimation of
surface roughness in end-milling. In:
11th ISMQC 2013, Cracow - Kielce, 11-13 September 2013, Poland. 11th International Symposium on Measurement and Quality Control 2013, September
11-13, 2013, Cracow-Kielce, Poland. [S. l.]: The International Measurement Confederation:
= IMEKO, 2013. 4 str., graf. prikazi. [COBISS.SI-ID
17164566]
307.
KOVAČIČ, Miha, SENČIČ, Sandra, ŽUPERL, Uroš. Artificial intelligence approach of modeling
of PM10 emission close to a steel plant. In: BRDAREVIĆ, Safet (ed.).
Quality 2013 : proceedings, 8th Research/expert conference with international participation,
Neum, Bosnia and Herzegovina, 06-08 June 2013 = 8. naučno-stručni skup sa međunarodnim
učešćem, Neum, Bosna i Hercegovina, 06-08 juni 2013. 8th Research/expert conference with international participation, Neum, Bosnia and
Herzegovina, 06-08 June 2013. Zenica: University of Zenica, Faculty of Mechanical
Engineering, 2013. Str. 305-310. Quality ... (Zenica). ISSN 1512-9268.
http://www.quality.unze.ba/zbornici/QUALITY%202013/050-Q13-013.pdf,
Repozitorij Univerze v Novi Gorici - RUNG. [COBISS.SI-ID
2933499]
308.
Asian journal of control. ŽUPERL, Uroš (reviewer 2010, 2011, 2012, 2013). Tainan: Chinese Automatic Control
Society. ISSN 1561-8625. [COBISS.SI-ID
6536532]
312.
Composites. Part B, Engineering. ŽUPERL, Uroš (reviewer 2012, 2013). [Print ed.]. Oxford: Elsevier. ISSN 1359-8368.
[COBISS.SI-ID
16857349]
313.
ČUŠ, Franc, ŽUPERL, Uroš. Control strategy for assuring constant surface finish by
controlling cutting forces.
Transactions of FAMENA. 2013, vol. 37, no. 3, str. 41-52. ISSN 1333-1124. [COBISS.SI-ID
17384470]
315.
KOVAČIČ, Miha, SENČIČ, Sandra, ŽUPERL, Uroš. Genetic programming and artificial neural
network modeling of PM10 emission close to a steel plant = Modeliranje emisij PM10
ob železarni z genetskim programiranjem in nevronskimi mrežami.
RMZ - Materials and geoenvironment : periodical for mining, metallurgy and geology. jul. 2013, vol. 60, no. 1, str. 9-16. ISSN 1408-7073.
http://www.rmz-mg.com/letniki/rmz60/RMZ60_0009-0016.pdf,
Digitalna knjižnica Slovenije - dLib.si,
Repozitorij Univerze v Novi Gorici - RUNG. [COBISS.SI-ID
2932987]
317.
ŽUPERL, Uroš, IRGOLIČ, Tomaž, ČUŠ, Franc. Intelligent fixturing system with clamping
force control. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Development of intelligent and innovative tools for production process engineering
and sustainable management. Maribor: Faculty of Mechanical Engineering, 2013. Str. 74-82. ISBN 978-961-248-418-7.
[COBISS.SI-ID
17716758]
325.
ČUŠ, Franc, ŽUPERL, Uroš. Linguistic model for estimation of surface roughness in
milling. In: JUNKAR, Mihael (ed.), et al.
MIT & SLIM 2013 : proceedings of the 12th International Conference on Management of
Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing,
Fiesa, Slovenia, 22th-24th September 2013. Ljubljana: TAVO - Slovene Society for Abrasive Water Jet Technology: LAT - Laboratory
for Alternative Technologies, Faculty of Mechanical Engineering: LABOD - Laboratory
for Cutting, 2013. Str. 210-213, graf. prikazi. ISBN 978-961-6536-67-7. [COBISS.SI-ID
17191446]
326.
ČUŠ, Franc, ŽUPERL, Uroš, IRGOLIČ, Tomaž. Linguistic model for estimation of surface
roughness in milling. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Development of intelligent and innovative tools for production process engineering
and sustainable management. Maribor: Faculty of Mechanical Engineering, 2013. Str. 1-7. ISBN 978-961-248-418-7.
[COBISS.SI-ID
17713942]
327.
ŽUPERL, Uroš.
Mehatronski sistemi : 6 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2013/2014, zimski semester. [COBISS.SI-ID
21914134]
328.
Modelling and Simulation in Engineering (print). ŽUPERL, Uroš (reviewer 2013). Cairo: Hindawi Publishing Corporation. ISSN 1687-5591.
[COBISS.SI-ID
517574681]
329.
ČUŠ, Franc, REIBENSCHUH, Marko, ŽUPERL, Uroš. On line visual inspection of chip geometry
and tool wear. In: ĆOSIĆ, Predrag (ed.), BARIĆ, Gordana (ed.).
Conference proceedings. 5th International Scientific Conference Management of Technology - Step to Sustainable
Production, MOTSP 2013, 29-31 May 2013, Novi Vinodolski, Croatia. Zagreb: Croatian
Association for PLM, cop. 2013. Str. [1-6], graf. prikazi. [COBISS.SI-ID
16987926]
330.
PLOJ VIRTIČ, Mateja, ŽUPERL, Uroš, JAVORNIK, Marija. Pedagogy 1:1 in higher education
: a case study. In: LAMANAUSKAS, Vincentas (ed.).
Science, technology, society and education issues - 2013. Siauliai: Scientific Methodological Center Scientia Educologica, 2013. Str. 102-110,
ilustr. Problems of education in the 21st century, vol. 57. ISSN 1822-7864.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
20258056]
332.
ŽUPERL, Uroš, ČUŠ, Franc. Razvoj kombiniranega sistema posrednega optimiranja in adaptivnega
vodenja visoko-hitrostnega frezanja s težko opredeljivo dinamiko. In:
Izjemni znanstveni dosežki 2012. Ljubljana: Javna agencija za raziskovalno dejavnost Republike Slovenije - ARRS,
2013. Str. [35]. [COBISS.SI-ID
17247766]
337.
ŽUPERL, Uroš.
TEAZA : program za testiranje, evidentiranje in arhiviranje znanja s področja avtomatizacije. Maribor: Fakulteta za strojništvo, Laboratorij za mehatroniko, 2013. [COBISS.SI-ID
16651542]
338.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. Turning process optimization by using intelligent
anfis-ants system. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Development of intelligent and innovative tools for production process engineering
and sustainable management. Maribor: Faculty of Mechanical Engineering, 2013. Str. 48-60. ISBN 978-961-248-418-7.
[COBISS.SI-ID
17715734]
339.
ŽUPERL, Uroš, ČUŠ, Franc. Turning process optimization by using intelligent ANFIS-ants
system. In: MAJSTOROVIĆ, Vidosav D. (ed.).
Proceedings. The 7th International Working Conference Total Quality Management - Advanced and
Intelligent Approaches, TQM 2013, 3rd-7th June, 2013, Belgrade, Serbia. Belgrade:
Mechanical Engineering Faculty, Laboratory for Production Metrology and TQM, 2013.
Str. 481-486, graf. prikazi. ISBN 978-86-7083-791-1. [COBISS.SI-ID
17003286]
340.
BALIČ, Jože, BREZOČNIK, Miran, ČUŠ, Franc, ŽUPERL, Uroš, FICKO, Mirko, DRSTVENŠEK,
Igor. Using of artificial intelligent methods in manufacturing engineering. In: ABELE,
Eberhard (ed.), UDILJAK, Toma (ed.), CIGLAR, Damir (ed.).
Computer integrated manufacturing and high speed machining : CIM 2013. 14th International Scientific Conference on Production Engineering - CIM 2013, June
19-22, 2013, Biograd, Croatia. Zagreb: Croatian Association of Production Engineering,
2013. Str. 7-12, ilustr. ISBN 978-953-7689-02-5. [COBISS.SI-ID
16984854]
2014
343.
ŽUPERL, Uroš, ČUŠ, Franc, VUKELIĆ, Djordje. Computer vision as a main part of tool
condition control. In: DUDIĆ, Slobodan (ed.).
Proceedings. XVI International Scientific Conference on Industrial Systems - IS '14, Novi Sad,
October 15-17, 2014. Novi Sad: Faculty of Technical Sciences, 2014. Str. 73-76, ilustr.,
graf. prikazi. ISBN 978-86-7892-652-5.
http://www.iim.ftn.uns.ac.rs/conferences/is14/wp-content/uploads/2014/11/IS_14_Proceedings.pdf. [COBISS.SI-ID
18308374]
345.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž, VUKELIĆ, Djordje. Indirect tool wear measuring
technique combined with optoelectronic system for automated tool condition control.
Journal of production engineering. 2014, vol. 17, no. 1, str. 47-50. ISSN 1821-4932.
http://www.jpe.ftn.uns.ac.rs/papers/2014/no1/9-Zuperl.pdf. [COBISS.SI-ID
17978902]
347.
ŽUPERL, Uroš.
Krmilna tehnika : 5 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2013/2014, letni semester. [COBISS.SI-ID
21913878]
349.
Measurement : journal of the International Measurement Confederation. ŽUPERL, Uroš (reviewer 2013-2014). [Print ed.]. London: Institute of Measurement
and Control, 1983-. ISSN 0263-2241. [COBISS.SI-ID
25917696]
350.
ŽUPERL, Uroš.
Mehatronski sistemi : 10 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2014/2015, zimski semester. [COBISS.SI-ID
21914646]
351.
ŽUPERL, Uroš, ČUŠ, Franc. Neural network assisted particle swarm optimization of machining
process. In: KUNDRÁK, János (ed.), MAROS, Zsolt (ed.).
Precision Machining VII : selected, peer reviewed papers from the 7th International
Congress of Precision Machining (ICPM 2013), October 3-5, 2013, Miskolc, Hungary. Zurich: Trans Tech Publications Ltd., cop. 2014. Str. 511-516. ISBN 978-3-03785-840-0.
DOI:
10.4028/www.scientific.net/KEM.581.511. [COBISS.SI-ID
17441814]
355.
Shock and vibration. ŽUPERL, Uroš (reviewer 2014). New York, NY: John Wiley & Sons, 1993-. ISSN 1070-9622.
[COBISS.SI-ID
15155205]
2015
363.
International journal of simulation modelling. ŽUPERL, Uroš (reviewer 2009, 2015). Vienna: DAAAM International Vienna, 2002-. ISSN
1726-4529.
http://www.ijsimm.com/. [COBISS.SI-ID
8008982]
365.
ŽUPERL, Uroš.
Krmilna tehnika : 6 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2014/2015, letni semester. [COBISS.SI-ID
21914390]
367.
ŽUPERL, Uroš.
Mehatronski sistemi : 11 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2015/2016, zimski semester. [COBISS.SI-ID
21915158]
368.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. Model based surface roughness control strategy.
In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.), CHIAMPO, Fulvia (ed.).
Methods and techniques for industrial development. Maribor: Faculty of Mechanical Engineering, 2015. Str. 101-113. ISBN 978-961-248-493-4.
[COBISS.SI-ID
19032342]
370.
JOVANOVIČ, Benjamin, HACE, Aleš, ŽUPERL, Uroš. Naprava za avtomatizirano dimenzijsko
in oblikovno kontrolo izdelanih puš.
Ventil : revija za fluidno tehniko in avtomatizacijo. [Tiskana izd.]. avg. 2015, letn. 21, št. 4, str. 300-304, ilustr. ISSN 1318-7279.
Digitalna knjižnica Slovenije - dLib.si. [COBISS.SI-ID
14165275]
371.
JOVANOVIČ, Benjamin. Naprava za avtomatizirano kontrolo puš = The device for automated
control of bushes. In: MUŠKINJA, Nenad (ed.), ROTOVNIK, Milan (ed.).
Zbornik devete konference Avtomatizacija v industriji in gospodarstvu - AIG'15, [9.
in 10. april 2015, Maribor, Slovenija]. Maribor: Društvo avtomatikov Slovenije, 2015. Str. 1-7. ISBN 978-961-93818-1-6.
http://www.aig.si/15/zbornik/clanki/Jovanovic.pdf. [COBISS.SI-ID
18616598]
374.
ČUŠ, Franc, ŽUPERL, Uroš.
Poročilo za: Projekt platform in modulne gradnje - analiza za 2020 PRIMAT d.d. : (Zbrani
zapisi za razgovor in razpravo: Primat pogodba FS/PRIM-2015/II). Maribor: Fakulteta za strojništvo, 2015. [36] f., ilustr. [COBISS.SI-ID
19789078]
377.
ŽUPERL, Uroš, ČUŠ, Franc. Simulation and visual control of chip size for constant
surface roughness.
International journal of simulation modelling. Sep. 2015, vol. 14, no. 3, str. 392-403. ISSN 1726-4529. [COBISS.SI-ID
18907670]
382.
ŽUPERL, Uroš (editor), HACE, Aleš (editor),
4. letna konference Mehatronike 2015, Maribor, 2. julij 2015.
Zbornik povzetkov študentskih projektov. Maribor: Fakulteta za elektrotehniko, računalništvo in informatiko: Fakulteta za
strojništvo, 2015. 33 str., ilustr. ISBN 978-961-248-490-3.
http://mehatronika.uni-mb.si,
http://mehatronika.um.si/images/KONFERENCA/konferenca%202015.pdf. [COBISS.SI-ID
83051265]
2016
383.
ŽUPERL, Uroš, ČUŠ, Franc. Adaptive network based inference system for simulation of
cutting forces in ball-end milling. In: ADAMCZAK, Stanisĺaw (ed.).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project CIII-PL-0007 : Monograph. Kielce: Kielce University of Technology, cop. 2016. Str. 157-165. ISBN 978-83-63792-15-2.
[COBISS.SI-ID
19774998]
384.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. Analiza rezalnih razmer pri oblikovnem frezanju
več-slojnih kovinskih materialov. In: ŠVETAK, Darko (ed.).
Vir znanja in izkušenj za stroko : zbornik foruma. [8.] industrijski forum IRT, Portorož, 6. in 7. junij 2016. Škofljica: Profidtp,
2016. Str. 281-284. ISBN 978-961-94025-0-4. [COBISS.SI-ID
19627286]
386.
Applied Surface Science. ŽUPERL, Uroš (reviewer 2016). [Print ed.]. Amsterdam: North-Holland, 1985-. ISSN
0169-4332. [COBISS.SI-ID
3283215]
389.
ČUŠ, Franc, REIBENSCHUH, Marko, ŽUPERL, Uroš. Chip geometry monitoring system for
improving milling process. In: ADAMCZAK, Stanisĺaw (ed.).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project CIII-PL-0007 : Monograph. Kielce: Kielce University of Technology, cop. 2016. Str. 21-29. ISBN 978-83-63792-15-2.
[COBISS.SI-ID
19773974]
391.
DREMPETIĆ, Marko.
Design and construction of the technological process of product production : master
thesis = Načrtovanje in izdelava tehnološkega procesa obdelave izdelka. Maribor: [M. Drempetić], 2016. XIV, 63 f., [6] f. pril. z načrti, ilustr.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
19551510]
393.
Engineering with computers. ŽUPERL, Uroš (reviewer 2011, 2016). New York; Berlin; Heidelberg; Tokyo: Springer,
1985-. ISSN 0177-0667. [COBISS.SI-ID
25397760]
394.
ČUŠ, Franc, ŽUPERL, Uroš. Integration of cutting force sensor and vision system for
automated tool condition monitoring. In: ADAMCZAK, Stanisĺaw (ed.).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project CIII-PL-0007 : Monograph. Kielce: Kielce University of Technology, cop. 2016. Str. 31-37. ISBN 978-83-63792-15-2.
[COBISS.SI-ID
19774230]
398.
ŽUPERL, Uroš.
Krmilna tehnika : 5 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2015/2016, letni semester. [COBISS.SI-ID
21914902]
399.
ŽUPERL, Uroš, ČUŠ, Franc. Low-priced single-sensor monitoring system based on anfis
tool breakage detector and neural wear estimator. In: ADAMCZAK, Stanisĺaw (ed.).
Research on modern systems for manufacture and measurement of components of machines
and devices : CEEPUS : Science report Project CIII-PL-0007 : Monograph. Kielce: Kielce University of Technology, cop. 2016. Str. 167-175. ISBN 978-83-63792-15-2.
[COBISS.SI-ID
19775254]
400.
ŽUPERL, Uroš.
Mehatronski sistemi : 11 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2016/2017, zimski semester. [COBISS.SI-ID
21915926]
401.
KOVAČIČ, Miha, ŠARLER, Božidar, ŽUPERL, Uroš. Natural gas consumption prediction in
Slovenian industry - a case study = Napovedovanje odjema zemeljskega plina v slovenski
industriji - študija primera.
RMZ - Materials and geoenvironment : periodical for mining, metallurgy and geology. July 2016, vol. 63, no. 2, str. 91-96, ilustr. ISSN 1408-7073.
https://www.degruyter.com/downloadpdf/j/rmzmag.2016.63.issue-2/rmzmag-2016-0008/rmzmag-2016-0008.xml,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.1515/rmzmag-2016-0008. [COBISS.SI-ID
19948054]
402.
DETIČEK, Edvard.
Navodilo za izvedbo laboratorijskih vaj pri predmetu Tehnična Kibernetika : [pomožno
učno gradivo]. I. del. Maribor: Fakulteta za strojništvo, maj 2016. 43 str., ilustr. [COBISS.SI-ID
19535126]
403.
IRGOLIČ, Tomaž, ČUŠ, Franc, ŽUPERL, Uroš. Optimiranje odrezavanja lasersko navarjenih
večslojnih kovinskih materialov s postopkom frezanja. In: ŠVETAK, Darko (ed.).
Vir znanja in izkušenj za stroko : zbornik foruma. [8.] industrijski forum IRT, Portorož, 6. in 7. junij 2016. Škofljica: Profidtp,
2016. Str. 289-294. ISBN 978-961-94025-0-4. [COBISS.SI-ID
19629846]
406.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. Prediction of cutting forces in ball-end
milling of multi-layered metal materials.
Strojniški vestnik. June 2016, vol. 62, no. 6, str. 340-350, si 60, ilustr. ISSN 0039-2480.
http://www.sv-jme.v-izdelavi.si/tekoci-letnik/strojniski-vestnik-62-2016-6/,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.5545/sv-jme.2015.3289. [COBISS.SI-ID
19621654]
414.
ŽUPERL, Uroš, RADIĆ, Antonio, ČUŠ, Franc, IRGOLIČ, Tomaž. Visual measurement of layer
thickness in multi-layered functionally graded metal materials.
Advances in production engineering & management. Jun. 2016, vol. 11, no. 2, str. 105-114, ilustr. ISSN 1854-6250.
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.14743/apem2016.2.213. [COBISS.SI-ID
19751446]
416.
ČUŠ, Franc, ŽUPERL, Uroš (author, illustrator).
Vpenjalna orodja in kombinirani sistemi vpenjanja za procese odrezavanja. Maribor: Fakulteta za strojništvo, 2016. 246 str., ilustr. ISBN 978-961-248-523-8.
[COBISS.SI-ID
88747521]
418.
HACE, Aleš (editor), ŽUPERL, Uroš (editor),
5. letna konference Mehatronike 2016, Maribor, 8. julij 2016.
Zbornik povzetkov študentskih projektov. Maribor: Fakulteta za elektrotehniko, računalništvo in informatiko: Fakulteta za
strojništvo, 2016. 29 str., ilustr. ISBN 978-961-248-515-3.
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si. [COBISS.SI-ID
87725569]
2017
423.
ŽUPERL, Uroš, ČUŠ, Franc. Combined TBLO optimization and ANFIS based objective function
modelling for constrained machining optimization. In: ABELE, Eberhard (ed.), UDILJAK,
Toma (ed.), CIGLAR, Damir (ed.).
Computer integrated manufacturing and high speed machining. 16th International Scientific Conference on Production Engineering, CIM 2017, June
8-10, 2017, Zadar, Croatia. Zagreb: Croatian Association of Production Engineering,
2017. Str. 243-248, ilustr. [COBISS.SI-ID
20644886]
426.
Engineering optimization. ŽUPERL, Uroš (reviewer 2017). London: Gordon and Breach. ISSN 0305-215X. [COBISS.SI-ID
10292229]
427.
IEEE transactions on industrial electronics. ŽUPERL, Uroš (reviewer 2014, 2017). [Print ed.]. New York: Institute of Electrical
and Electronics Engineers, 1982-. ISSN 0278-0046. [COBISS.SI-ID
8726789]
428.
ŽUPERL, Uroš, ČUŠ, Franc. Inteligentni vpenjalni sistemi razviti za avtonomne fleksibilne
obdelovalne sisteme. In: ŠVETAK, Darko (ed.).
Vir znanja in izkušenj za stroko : zbornik foruma. [9.] industrijski forum IRT, Portorož, 5. in 6. junij 2017. Škofljica: Profidtp,
2017. Str. 325-328. ISBN 978-961-94025-2-8. [COBISS.SI-ID
20605974]
430.
ŽUPERL, Uroš.
Krmilna tehnika : 12 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2016/2017, letni semester. [COBISS.SI-ID
21915414]
431.
ČUŠ, Franc, ŽUPERL, Uroš, IRGOLIČ, Tomaž, PANDILOV, Zoran. A linguistic model based
on if-then rules for cutting force predictions in end milling. In: ČUŠ, Franc (ed.),
GEČEVSKA, Valentina (ed.).
Advances in production and industrial engineering. Maribor: University of Maribor Press, 2017. Str. 123-133. ISBN 978-961-286-028-8.
https://dk.um.si/Dokument.php?id=111017. [COBISS.SI-ID
20549398]
432.
ŽUPERL, Uroš.
Mehatronski sistemi : 14 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2017/2018, zimski semester. [COBISS.SI-ID
21916438]
433.
Multidiscipline modeling in materials and structures. ŽUPERL, Uroš (reviewer 2017). Leiden: VSP. ISSN 1573-6105. [COBISS.SI-ID
3140961]
436.
ŽUPERL, Uroš, ČUŠ, Franc. Teaching-learning based algorithm combined with cutting
force modelling for end milling optimization. In: ČOSIĆ, Predrag (ed.).
MOTSP 2017 : book of abstracts. 9th International Scientific Conference Management of Technology - Step to Sustainable
Production, 5-7 April 2017, Dubrovnik, Croatia. Zagreb: Croatian Association for PLM,
cop. 2017. Str. 25. Management of technology step to sustainable production ... (Book
of abstracts). ISSN 1848-9591. [COBISS.SI-ID
20532502]
437.
ŽUPERL, Uroš, ČUŠ, Franc, IRGOLIČ, Tomaž. Teaching-learning based optimization algorithm
for cutting force maximization in end milling processes. In: ČUŠ, Franc (ed.), GEČEVSKA,
Valentina (ed.).
Advances in production and industrial engineering. Maribor: University of Maribor Press, 2017. Str. 147-159. ISBN 978-961-286-028-8.
https://dk.um.si/Dokument.php?id=111017. [COBISS.SI-ID
20549654]
438.
ČUŠ, Franc, IRGOLIČ, Tomaž, ŽUPERL, Uroš. Tool wear compensation in end milling based
on cutting force measuring and tool visual monitoring. In: ČUŠ, Franc (ed.), GEČEVSKA,
Valentina (ed.).
Advances in production and industrial engineering. Maribor: University of Maribor Press, 2017. Str. 97-105. ISBN 978-961-286-028-8.
https://dk.um.si/Dokument.php?id=111017. [COBISS.SI-ID
20548886]
439.
Transactions of the Canadian Society for Mechanical Engineering. ŽUPERL, Uroš (reviewer 2017). Montreal: Canadian Soc. for Mechanical Engineering.
ISSN 0315-8977. [COBISS.SI-ID
10717467]
440.
REIBENSCHUH, Marko, ŽUPERL, Uroš. Visual cutting chips size monitoring in milling
processes. In: ČUŠ, Franc (ed.), GEČEVSKA, Valentina (ed.).
Advances in production and industrial engineering. Maribor: University of Maribor Press, 2017. Str. 53-62. ISBN 978-961-286-028-8.
https://dk.um.si/Dokument.php?id=111017. [COBISS.SI-ID
20548118]
2018
446.
ŽUPERL, Uroš. An application of four robots and an intelligent conveyer system for
automated fixturing in machining. In: GOLUBOVIĆ, Dušan (ed.), KOŠARAC, Aleksandar
(ed.), JEREMIĆ, Dejan (ed.).
Zbornik radova = Proceedings. 1 izd. Istočno Sarajevo: Mašinski fakultet, 2018. Str. 217-220, ilustr. ISBN 978-99976-719-4-3.
[COBISS.SI-ID
22304022]
448.
ŽUPERL, Uroš. Automated measurement of layer thickeness in gradient materials. In:
KATALINIĆ, Branko (ed.).
DAAAM International scientific book 2018. Vienna: DAAAM International Vienna, 2018. Str. 13-22, ilustr. DAAAM International
scientific book. ISBN 978-3-902734-19-8. ISSN 1726-9687. [COBISS.SI-ID
21830422]
451.
GONZÁLES PUEYO, Anna.
Design and construction of a house residence for a people with cerebral paralysis
and related disabilities : final degree thesis. Maribor: [A. Gonzáles Pueyo], 2018. 64 f., ilustr. [COBISS.SI-ID
21262102]
452.
ČUŠ, Franc, ŽUPERL, Uroš. Experimental exploration of cutting forces during milling
of multi-layered metal materials. In: KATALINIĆ, Branko (ed.).
Annals 2018. DAAAM International Week 2018-10-21/28 and the 29th DAAAM International Symposium
"Intelligent Manufacturing & Automation", 2018-10-24/27, Zadar, Croatia. Vienna: DAAAM
International Vienna, cop. 2018. Str. [1-5]. Annals of DAAAM, Vol. 29, no. 1. ISBN
978-3-902734-21-1. ISSN 2304-1382. [COBISS.SI-ID
21859094]
453.
IEEE transactions on fuzzy systems. ŽUPERL, Uroš (reviewer 2018). [Print ed.]. New York: IEEE, 1993-. ISSN 1063-6706.
[COBISS.SI-ID
13882885]
454.
IEEE transactions on industrial informatics. ŽUPERL, Uroš (reviewer 2018). [Print ed.]. New York: The Institute of Electrical
and Electronics Engineers, 2005-. ISSN 1551-3203. [COBISS.SI-ID
9526550]
455.
ŽUPERL, Uroš, ČUŠ, Franc. Intelligent machining process planning and cloud computing
as technological perspectives for management systems = Ocena zanesljivosti relejev
za naprave v medicini. In: ARSENIJEVIĆ, Olja (ed.), et al.
Organizacija in negotovosti v digitalni dobi : konferenčni zbornik = Organization
and uncertainty in the digital age : conference proceedings. 37th International Conference on Organizational Science Development, 21st - 23rd
March 2018, Portorož, Slovenia. 1. izd. Maribor: Univerzitetna založba Univerze, 2018.
Str. 1276-1284. ISBN 978-961-286-146-9.
http://press.um.si/index.php/ump/catalog/book/326. [COBISS.SI-ID
21298710]
458.
ŽUPERL, Uroš.
Krmilna tehnika : 21 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2017/2018, letni semester. [COBISS.SI-ID
21916182]
460.
ŽUPERL, Uroš.
Mehatronski sistemi : 11 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2018/2019, zimski semester. [COBISS.SI-ID
22963990]
464.
ŽUPERL, Uroš. Platform for surface roughness monitoring via cutting tool load control.
In: GOLUBOVIĆ, Dušan (ed.), KOŠARAC, Aleksandar (ed.), JEREMIĆ, Dejan (ed.).
Zbornik radova = Proceedings. 1 izd. Istočno Sarajevo: Mašinski fakultet, 2018. Str. 125-130, ilustr. ISBN 978-99976-719-4-3.
[COBISS.SI-ID
22303766]
466.
ŽUPERL, Uroš, ČUŠ, Franc. Sistem za vizualni nadzor rezalnih orodij na obdelovalnih
strojih. In: ŠVETAK, Darko (ed.).
Vir znanja in izkušenj za stroko : zbornik foruma. [10.] Industrijski forum IRT 2018, Portorož, 4. in 5. junij 2018. Škofljica: Profidtp,
2018. Str. 99-102. ISBN 978-961-94025-4-2. [COBISS.SI-ID
21497622]
2019
471.
ŽUPERL, Uroš (editor), HACE, Aleš (editor),
8. letna konferenca Mehatronike 2019.
8. letna konferenca Mehatronike 2019 : zbornik povzetkov študentskih projektov : Maribor,
september 2019. 1. izd. Maribor: Univerzitetna založba Univerze: Fakulteta za strojništvo: Fakulteta
za elektrotehniko, računalništvo in informatiko, 2019. 1 spletni vir (1 datoteka PDF
(48 str.)). ISBN 978-961-286-291-6.
http://press.um.si/index.php/ump/catalog/book/426,
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.18690/978-961-286-291-6. [COBISS.SI-ID
97003521]
476.
ŽUPERL, Uroš, ČUŠ, Franc. A cyber-physical system for smart fixture monitoring via
clamping simulation.
International journal of simulation modelling. Mar. 2019, vol. 18, no. 1, str. 112-124. ISSN 1726-4529. [COBISS.SI-ID
22209558]
477.
ŽUPERL, Uroš, ČUŠ, Franc. A cyber-physical system for surface roughness monitoring
in end-milling.
Strojniški vestnik. Feb. 2019, vol. 65, no. 2, str. 67-77, si 11, ilustr. ISSN 0039-2480.
https://www.sv-jme.eu/sl/article/smart-surface-roughness-monitoring-in-end-milling/,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.5545/sv-jme.2018.5792. [COBISS.SI-ID
16495131]
478.
ŽUPERL, Uroš, IRGOLIČ, Tomaž, KOVAČIČ, Miha. Determination of minimal required depth
of milling needed for obtaining the desired surface quality in machining of multi-layer
metal materials. In: GODEC, Matjaž (ed.), et al.
Program in knjiga povzetkov = Program and book of abstracts. 27. Mednarodna konferenca o materialih in tehnologijah, 16.-18. oktober 2019, Portorož,
Slovenija = 27th International Conference on Materials and Technology, 16-18 October
2019, Portorož, Slovenia. Ljubljana: Inštitut za kovinske materiale in tehnologije,
2019. Str. 94. ISBN 978-961-94088-3-4.
http://mit.imt.si/Revija/izvodi/mit194/BookOfAbstracts_27ICM&T.pdf. [COBISS.SI-ID
153461763]
482.
ZAWADA-TOMKIEWICZ, Anna, ŚCIEGIENKA, Ryszard, ŽUPERL, Uroš, STĘPIEŃ, Krzysztof. Images
of the machined surface in evaluation of the efficiency of a micro-smoothing process.
Strojniški vestnik. July-Aug. 2019, vol. 65, no. 7/8, str. 410-419, si 52, ilustr. ISSN 0039-2480.
https://www.sv-jme.eu/sl/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.5545/sv-jme.2018.5883. [COBISS.SI-ID
16728091]
485.
Proceedings of the Institution of Mechanical Engineers. Part D, Journal of automobile
engineering. ŽUPERL, Uroš (reviewer 2019). London: The Institution of Mechanical Engineers, 1989-.
ISSN 0954-4070. [COBISS.SI-ID
28242432]
486.
Journal of sound and vibration. ŽUPERL, Uroš (reviewer 2019). [Print ed.]. London; New York: Academic Press, 1964-.
ISSN 0022-460X. [COBISS.SI-ID
540946]
489.
ŽUPERL, Uroš.
Krmilna tehnika : 3 ure predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2018/2019, poletni semester. [COBISS.SI-ID
22964246]
490.
ŽUPERL, Uroš.
Mehatronski sistemi : 12 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2019/2020, zimski semester. 2019. [COBISS.SI-ID
29576963]
492.
HAAS, Franz, SUÁREZ, Andres, ČUŠ, Franc, ŽUPERL, Uroš. Platform for monitoring and
comparing machining processes in terms of energy efficiency.
Transactions of FAMENA. 2019, vol. 43, no. 2, str. 31-47. ISSN 1333-1124. DOI:
10.21278/TOF.43203. [COBISS.SI-ID
22656278]
2020
501.
ŽUPERL, Uroš, ČUŠ, Franc. Combined intelligent and adaptive optimization in end milling
of multi-layered 16MnCr5/316L. In: RAO, R. Venkata (ed.), TALER, Jan (ed.).
Advanced engineering optimization through intelligent techniques : select proceedings
of AEOTIT 2018. Singapore: Springer Nature Singapore Pte Ltd., cop. 2020. Str. 1-11. Advances in
intelligent systems and computing (Print), vol. 949, Advances in intelligent systems
and computing (Internet), vol. 949. ISBN 978-981-13-8196-6, ISBN 978-981-13-8195-9.
ISSN 2194-5357, ISSN 2194-5365.
https://link.springer.com/content/pdf/10.1007%2F978-981-13-8196-6.pdf, DOI:
10.1007/978-981-13-8196-6_1. [COBISS.SI-ID
22648598]
502.
POGORELC, Janez (editor), HACE, Aleš (editor), ŽUPERL, Uroš (editor).
9. letna konferenca mehatronike 2020 : zbornik povzetkov študentskih projektov. 1. izd. Maribor: Univerzitetna založba Univerze: Fakulteta za strojništvo: Fakulteta
za elektrotehniko, računalništvo in informatiko, 2020. 1 spletni vir (1 datoteka PDF
( V, 106, [2], str.)), ilustr. ISBN 978-961-286-384-5.
https://press.um.si/index.php/ump/catalog/book/502,
Digitalna knjižnica Slovenije - dLib.si,
Digitalna knjižnica Univerze v Mariboru – DKUM, DOI:
10.18690/978-961-286-384-5. [COBISS.SI-ID
28714755]
503.
KOVAČIČ, Miha, ŽUPERL, Uroš. Genetic programming in the steelmaking industry.
Genetic programming and evolvable machines. 2020, vol. 21, str. 99-128, ilustr. ISSN 1573-7632. DOI:
10.1007/s10710-020-09382-5. [COBISS.SI-ID
14436867]
506.
ŽUPERL, Uroš.
Krmilna tehnika : 2 uri predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2019/2020, poletni semester. [COBISS.SI-ID
29514755]
507.
ŽUPERL, Uroš.
Mehatronski sistemi : 6 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2020/2021, zimski semester (online). [COBISS.SI-ID
81095171]
508.
ŽUPERL, Uroš, IRGOLIČ, Tomaž, KOVAČIČ, Miha. Minimum depth of milling to obtain the
desired surface roughness in multi-layer materials = Minimalna globina frezanja za
dosego želene hrapavosti površine pri večslojnih materialih.
Materiali in tehnologije. [Tiskana izd.]. 2020, letn. 54, št. 6, str. 747-753, ilustr. ISSN 1580-2949.
http://mit.imt.si/izvodi/mit206/zuperl.pdf,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.17222/mit.2019.263. [COBISS.SI-ID
43350275]
511.
ŽUPERL, Uroš, ČUŠ, Franc, ZAWADA-TOMKIEWICZ, Anna, STĘPIEŃ, Krzysztof. Neuro-mechanistic
model for cutting force prediction in helical end milling of metal materials layered
in multiple directions.
Advances in production engineering & management. Mar. 2020, vol. 15, no. 1, str. 5-17, ilustr. ISSN 1854-6250.
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.14743/apem2020.1.345. [COBISS.SI-ID
23128342]
514.
Soft computing. ŽUPERL, Uroš (reviewer 2012, 2018, 2020). [Print ed.]. Heidelberg: Springer, 1997-.
ISSN 1432-7643. [COBISS.SI-ID
11144982]
2021
519.
POGORELC, Janez (editor), HACE, Aleš (editor), ŽUPERL, Uroš (editor).
10. letna konferenca mehatronike 2021 : zbornik povzetkov študentskih projektov. 1. izd. Maribor: Univerzitetna založba Univerze: Fakulteta za elektrotehniko, računalništvo
in informatiko: Fakulteta za strojništvo, 2021. 1 spletni vir (1 datoteka PDF (94,
[2] str.)), ilustr. ISBN 978-961-286-504-7.
https://press.um.si/index.php/ump/catalog/book/596,
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.18690/978-961-286-504-7. [COBISS.SI-ID
72068099]
523.
ŽUPERL, Uroš.
Krmilna tehnika : 6 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2020/2021, poletni semester (online). [COBISS.SI-ID
81090819]
525.
ŽUPERL, Uroš.
Mehatronski sistemi : 10 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2021/2022, zimski semester. [COBISS.SI-ID
146161667]
527.
KOVAČIČ, Miha, SALIHU, Shpetim, ŽUPERL, Uroš. Model for predicting the machinability
of continuously cast and subsequently rolled steel using the artificial neural network.
Tehnički glasnik. 2021, vol. 15, no. 3, str. 381-386. ISSN 1846-6168. DOI:
10.31803/tg-20210619190926. [COBISS.SI-ID
79817219]
529.
KOVAČIČ, Miha, SALIHU, Shpetim, GANTAR, Gašper, ŽUPERL, Uroš.
Modeling and optimization of machinability of calcium treated steels : presentation
at 27th Conference on Computer Methods in Materials Science, KomPlasTech 2021, Krakow,
Poland, march 8-9, 2021. [COBISS.SI-ID
56690179]
530.
KOVAČIČ, Miha, SALIHU, Shpetim, GANTAR, Gašper, ŽUPERL, Uroš. Modeling and optimization
of steel machinability with genetic programming: Industrial study.
Metals. Mar. 2021, vol. 11, iss. 3 (426), str. 1-13. ISSN 2075-4701. DOI:
10.3390/met11030426. [COBISS.SI-ID
54223619]
533.
BREZOČNIK, Miran, ŽUPERL, Uroš. Optimization of the continuous casting process of
hypoeutectoid steel grades using multiple linear regression and genetic programming
- An industrial study.
Metals. 17 June 2021, vol. 11, iss. 6 (972), str. 1-12. ISSN 2075-4701. DOI:
10.3390/met11060972. [COBISS.SI-ID
74149635]
537.
Proceedings of the Institution of Mechanical Engineers. Part E, Journal of process
mechanical engineering. ŽUPERL, Uroš (reviewer 2021). [Online ed.]. London: Professional Engineering Publishing;
[London]: Sage, 1989-. ISSN 2041-3009.
http://pie.sagepub.com/. [COBISS.SI-ID
521324057]
2022
547.
ŽUPERL, Uroš, KOVAČIČ, Miha, BREZOČNIK, Miran. An anfis-mechanistic simulator of tool
loads in ball-end milling of layered metal materials.
International journal of simulation modelling. Dec. 2022, vol. 21, no. 4, str. 639-650. ISSN 1726-4529. DOI:
10.2507/IJSIMM21-4-624. [COBISS.SI-ID
133438467]
549.
ŽUPERL, Uroš, STĘPIEŃ, Krzysztof, MUNĐAR, Goran, KOVAČIČ, Miha. A cloud-based system
for the optical monitoring of tool conditions during milling through the detection
of chip surface size and identification of cutting force trends.
Processes. [Online ed.]. March 2022, vol. 10, iss. 4, 21 str., ilustr. ISSN 2227-9717. DOI:
10.3390/pr10040671. [COBISS.SI-ID
102886659]
550.
Composite structures. ŽUPERL, Uroš (reviewer 2018, 2021-2022). [Print ed.]. Barking: Applied Science.
ISSN 0263-8223. [COBISS.SI-ID
15329285]
552.
MUNĐAR, Goran, ŽUPERL, Uroš. Development and control of a virtual industrial sorting
process. In: GOLUBOVIĆ, Dušan (ed.), MILUTINOVIC, Miroslav (ed.), PRODANOVIĆ, Saša.
Zbornik radova = Proceedings : COMETa 2022 : [6. Međunarodna naučna konferencija "Primijenjene
tehnologije u mašinskom inženjerstvu"] : Istočno Sarajevo, BIH, RS, 17 - 19. novembar
2022. = 6th International Scientific Conference "Conference on Mechanical Engineering
Technologies and Applications" = East Sarajevo, B&H, RS, 17th - 19th November, 2022. Istočno Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet: = University
of East Sarajevo, Faculty of Mechanical Engineering, East Sarajevo, 2022. Str. 163-170,
ilustr. ISBN 978-99976-947-6-8.
http://cometa.ues.rs.ba/Zbornik%20radova%20COMETa2022.pdf. [COBISS.SI-ID
134331395]
553.
HACE, Aleš (editor), ŽUPERL, Uroš (editor).
11. letna konferenca mehatronike 2022 : zbornik povzetkov študentskih projektov. 1. izd. Maribor: Univerza v Mariboru, Univerzitetna založba: Fakulteta za elektrotehniko,
računalništvo in informatiko: Fakulteta za strojništvo, 2022. 1 spletni vir (1 datoteka
PDF (III, 86, [2] str.)), ilustr. ISBN 978-961-286-628-0.
https://press.um.si/index.php/ump/catalog/book/723,
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.18690/um.fs.6.2022. [COBISS.SI-ID
121902083]
555.
ŽUPERL, Uroš, KOVAČIČ, Miha. An intelligent robotic cells with transport system for
fully automated cutting tool assembly. In: GOLUBOVIĆ, Dušan (ed.), MILUTINOVIC, Miroslav
(ed.), PRODANOVIĆ, Saša.
Zbornik radova = Proceedings : COMETa 2022 : [6. Međunarodna naučna konferencija "Primijenjene
tehnologije u mašinskom inženjerstvu"] : Istočno Sarajevo, BIH, RS, 17 - 19. novembar
2022. = 6th International Scientific Conference "Conference on Mechanical Engineering
Technologies and Applications" = East Sarajevo, B&H, RS, 17th - 19th November, 2022. Istočno Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet: = University
of East Sarajevo, Faculty of Mechanical Engineering, East Sarajevo, 2022. Str. 153-156,
ilustr., graf. prikazi. ISBN 978-99976-947-6-8.
http://cometa.ues.rs.ba/Zbornik%20radova%20COMETa2022.pdf. [COBISS.SI-ID
134316803]
556.
OSREČKI, Sebastjan.
Izdelava in krmiljenje virtualnega transportnega procesa z uporabo programskih orodij
Factory I/O in TIA Portal : diplomsko delo. Maribor: [S. Osrečki], 2022. 1 spletni vir (1 datoteka PDF (VIII, 52 f.)), ilustr.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
139561475]
557.
ARTIČ, Miha.
Krmiljenje virtualnega pnevmatskega sistema z uporabo programskih orodij FluidSim
in Factory I/O : diplomsko delo univerzitetnega študijskega programa. Maribor: [M. Artič], 2022. 1 spletni vir (1 datoteka PDF (XIII, 53 f.)), ilustr.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
156834051]
558.
ŽUPERL, Uroš.
Krmilna tehnika : 6 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2021/2022, poletni semester. [COBISS.SI-ID
146161411]
559.
ŽUPERL, Uroš.
Mehatronski sistemi : 10 ur predavanj tujim študentom v okviru programa mednarodne
izmenjave študentov Erasmus+, študijsko leto 2022/2023, zimski semester. [COBISS.SI-ID
173953283]
561.
KOVAČIČ, Miha, ŽUPERL, Uroš. Modeling of tensile test results for low alloy steels
by linear regression and genetic programming taking into account the non-metallic
inclusions.
Metals. Aug. 2022, vol. 12, iss. 8 (1343), str. 1-17, ilustr. ISSN 2075-4701. DOI:
10.3390/met12081343. [COBISS.SI-ID
118540547]
564.
MUNĐAR, Goran, ŽUPERL, Uroš. Optical tool condition monitoring techniques in milling
process. In:
Industry 4.0 : proceedings : VII International Scientific Conference Summer Session
: 22-25 June, 2022, Varna, Bulgaria. Sofia: Scientific-technical union of mechanical engineering - Industry 4.0, 2022.
Str. 110-113. International Scientific Conference Industry 4.0 (Online), Dominant
technologies in "Industy 4.0", Year VII, vol. 1/14, June 2022, International Scientific
Conference Industry 4.0 (Print), Year VII, vol. 1/14, June 2022. ISSN 2535-0161, ISSN
2535-0153.
https://industry-4.eu/winter/sbornik/1-2022.pdf. [COBISS.SI-ID
123476995]
565.
KOVAČIČ, Miha, ŽUPERL, Uroš, BREZOČNIK, Miran. Optimization of the rhomboidity of
continuously cast billets using linear regression and genetic programming : a real
industrial study.
Advances in production engineering & management. Dec. 2022, vol. 17, no. 4, str. 469-478, ilustr. ISSN 1854-6250.
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.14743/apem2022.4.449. [COBISS.SI-ID
136297219]
566.
ŽUPERL, Uroš, MUNĐAR, Goran. Platform for tool wear monitoring via cutting force control.
In: GOLUBOVIĆ, Dušan (ed.), MILUTINOVIC, Miroslav (ed.), PRODANOVIĆ, Saša.
Zbornik radova = Proceedings : COMETa 2022 : [6. Međunarodna naučna konferencija "Primijenjene
tehnologije u mašinskom inženjerstvu"] : Istočno Sarajevo, BIH, RS, 17 - 19. novembar
2022. = 6th International Scientific Conference "Conference on Mechanical Engineering
Technologies and Applications" = East Sarajevo, B&H, RS, 17th - 19th November, 2022. Istočno Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet: = University
of East Sarajevo, Faculty of Mechanical Engineering, East Sarajevo, 2022. Str. 157-162,
ilustr. ISBN 978-99976-947-6-8.
http://cometa.ues.rs.ba/Zbornik%20radova%20COMETa2022.pdf. [COBISS.SI-ID
134325251]
571.
RAČNIK, Tilen.
Snovanje modularne vpenjalne priprave za obdelavo prirobnega parnega cedila : diplomsko
delo univerzitetnega študijskega programa. Maribor: [T. Račnik], 2022. 1 spletni vir (1 datoteka PDF (XIII, 39 f., [4] f. pril.)),
ilustr.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
157052931]
573.
ŚWIDERSKI, Jacek, WŁODZIMIERZ, Makieła, DOBROWOLSKI, Tomasz, STĘPIEŃ, Krzysztof, ŽUPERL,
Uroš. The study of the roundness and cylindricity deviations of parts produced with
the use of the additive manufacturing.
International journal of advanced manufacturing technology. Aug. 2022, vol. 121, iss. 11/12, str. 7427-7437. ISSN 0268-3768. DOI:
10.1007/s00170-022-09838-1. [COBISS.SI-ID
118626051]
576.
ŽUPERL, Uroš. Udejstvovanje Fakultete za strojništvo Univerze v Mariboru na raziskovalnih
projektih CEEPUS. In: ADAMCZAK, Stanisĺaw (ed.).
Księga pamiątkowa z okazji 50-lecia pracy w Politechnice Świętokrzyskiej prof. dr.
hab. inż. Stanisława Adamczaka, dr. h.c. multi : metrologia królową badań eksperymentalnych. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2022. Str. 233-241, ilustr. Monografie,
Studia, Rozprawy, M153. ISBN 978-83-66678-28-6. ISSN 1897-2691. [COBISS.SI-ID
150157315]
580.
RADEK, Norbert, KALINOWSKI, Artur, STĘPIEŃ, Krzysztof, ORMAN, Łikasz J., ŽUPERL, Uroš,
BUJNOWSKI, Michał, MIKINA, Andrzej. Właściwości eksploatacyjne powłok DLC i ich potencjalne
zastosowanie. In: ADAMCZAK, Stanisĺaw (ed.).
Księga pamiątkowa z okazji 50-lecia pracy w Politechnice Świętokrzyskiej prof. dr.
hab. inż. Stanisława Adamczaka, dr. h.c. multi : metrologia królową badań eksperymentalnych. Kielce: Wydawnictwo Politechniki Świętokrzyskiej, 2022. Str. 210-216, ilustr. Monografie,
Studia, Rozprawy, M153. ISBN 978-83-66678-28-6. ISSN 1897-2691. [COBISS.SI-ID
147922179]
2023
587.
KOVAČIČ, Miha, ŽUPERL, Uroš. Continuous caster final electromagnetic stirrers position
optimization using genetic programming.
Materials and manufacturing processes. 31 May 2023, vol. 38, iss. [12], 9 str., ilustr. ISSN 1042-6914. DOI:
10.1080/10426914.2023.2219317. [COBISS.SI-ID
154734083]
588.
ŽUPERL, Uroš (editor), HACE, Aleš (editor).
12. letna konferenca mehatronike 2023 : zbornik povzetkov študentskih projektov. 1. izd. Maribor: Univerza v Mariboru, Univerzitetna založba: Fakulteta za strojništvo:
Fakulteta za elektrotehniko, računalništvo in informatiko, 2023. 1 spletni vir (1
datoteka PDF (96, [2] str.)), ilustr. ISBN 978-961-286-791-1.
https://press.um.si/index.php/ump/catalog/book/818,
Digitalna knjižnica Univerze v Mariboru – DKUM,
Digitalna knjižnica Slovenije - dLib.si, DOI:
10.18690/um.feri.10.2023. [COBISS.SI-ID
166478595]
592.
ŠETAR, Žiga.
Izdelava in krmiljenje virtualnega industrijskega procesa v programskem okolju Factory
I/O s Siemens S7-PLCSIM krmilnikom : magistrsko delo. Maribor: [Ž. Šetar], 2023. 1 spletni vir (1 datoteka PDF (XII, 50 f.)).
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
152265987]
593.
KMETEC, Jan.
Izdelava in nadzor navideznega procesa pretoka vode v rezervoarju z uporabo Factory
I/O in vizualizacije preko zaslona HMI : diplomsko delo. Maribor: [J. Kmetec], 2023. 1 spletni vir (1 datoteka PDF (VIII, 43 f.)), ilustr.
Digitalna knjižnica Univerze v Mariboru – DKUM. [COBISS.SI-ID
192311299]
595.
ŽUPERL, Uroš.
Krmilna tehnika : 10 ur predavanj tujim študentom v okviru programa mednarodne izmenjave
študentov Erasmus+, študijsko leto 2022/2023, poletni semester. [COBISS.SI-ID
173950723]
602.
ŽUPERL, Uroš, MUNĐAR, Goran. Nadzor obrabe rezalnega orodja s sistemom strojnega vida.
In: ŠVETAK, Darko (ed.).
Vir znanja in izkušenj za stroko : 14. industrijski forum IRT : zbornik foruma : Portorož,
12. in 13. junij 2023. Škofljica: Profidtp, 2023. Str. 161-166, ilustr. ISBN 978-961-95800-3-5.
https://www.forum-irt.si/program/. [COBISS.SI-ID
156046083]
604.
Neural computing & applications. ŽUPERL, Uroš (reviewer 2011-2012, 2017-2023). London: Springer, 1993-. ISSN 0941-0643.
[COBISS.SI-ID
1607958]
607.
KOVAČIČ, Miha, ŽUPERL, Uroš, GUSEL, Leo, BREZOČNIK, Miran. Reduction of surface defects
by optimization of casting speed using genetic programming : an industrial case study.
Advances in production engineering & management. Dec. 2023, vol. 18, no. 4, str. 501-511, ilustr. ISSN 1854-6250.
Digitalna knjižnica Univerze v Mariboru – DKUM, DOI:
10.14743/apem2023.4.488. [COBISS.SI-ID
182007555]
2024
623.
International journal of heat and mass transfer. ŽUPERL, Uroš (reviewer 2024). [Print ed.]. Oxford; New York: Pergamon Press, 1960-.
ISSN 0017-9310. [COBISS.SI-ID
3064335]
626.
STĘPIEŃ, Krzysztof, KMIECIK-SOŁTYSIAK, Urszula, CEPOVA, Lenka, ŽUPERL, Uroš. Problems
of measurements of roundness deviations with the use of coordinate measuring machines.
MM Science Journal. Feb. 2024, str. 7203-7209, ilustr. ISSN 1805-0476.
https://www.mmscience.eu/journal/issues/february-2024/articles/problems-of-measurements-of-roundness-deviations-with-the-use-of-coordinate-measuring-machines, DOI:
10.17973/MMSJ.2024_02_2023142. [COBISS.SI-ID
185838339]
627.
Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering
manufacture. ŽUPERL, Uroš (reviewer 2007, 2009-2013, 2016-2020, 2022-2024). London; Birmingham
(Ala.): Mechanical Engineering Publications, 1989-. ISSN 0954-4054. [COBISS.SI-ID
26744064]
Selected format of bibliographic unit: ISO 690
Sorting of bibliographic units: Year - ascending, title
A source of bibliographic data: shared data base COBISS.SI/COBIB.SI, 23. 5. 2024