COBISS Kooperativni online bibliografski sistem in servisi COBISS
dr. Jože Korelc [11536]
Osebna bibliografija za obdobje 1989-2023
ČLANKI IN DRUGI SESTAVNI DELI
1.01 Izvirni znanstveni članek
1.
BÖHM, Christoph, KORELC, Jože, HUDOBIVNIK, Blaž, KRAUS, Alex, WRIGGERS, Peter. Mixed
virtual element formulations for incompressible and inextensible problems.
Computational mechanics. apr. 2023, str. 1-34, ilustr. ISSN 0178-7675.
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=146425, DOI:
10.1007/s00466-023-02340-9. [COBISS.SI-ID
151127043]
projekt: P2-0158 Gradbene konstrukcije in gradbena fizika; financer: ARRS
2.
BÖHM, Christoph, MUNK, Lukas, HUDOBIVNIK, Blaž, ALDAKHEEL, Fadi, KORELC, Jože, WRIGGERS,
Peter. Virtual Elements for computational anisotropic crystal plasticity.
Computer methods in applied mechanics and engineering. [Print ed.]. 2023, vol. 405, art. 1115835, str. 1-32, ilustr. ISSN 0045-7825.
https://www.sciencedirect.com/science/article/pii/S0045782522007915,
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=146449, DOI:
10.1016/j.cma.2022.115835. [COBISS.SI-ID
147709699]
projekt: P2-0158 Gradbene konstrukcije in gradbena fizika; financer: ARRS
3.
CIHAN, Mertcan, HUDOBIVNIK, Blaž, KORELC, Jože, WRIGGERS, Peter. A virtual element
method for 3D contact problems with non-conforming meshes.
Computer methods in applied mechanics and engineering. [Print ed.]. 2022, vol. 402, art. 115385, str. 1-18, ilustr. ISSN 0045-7825.
https://www.sciencedirect.com/science/article/pii/S0045782522004534, DOI:
10.1016/j.cma.2022.115385. [COBISS.SI-ID
147670275]
projekt: P2-0158 Gradbene konstrukcije in gradbena fizika; financer: ARRS
5.
KWIECIEŃ, Arkadiusz, GAMS, Matija, ROUSAKIS, Theodoros, VISKOVIC, Alberto, KORELC,
Jože. Validation of a new hyperviscoelastic model for deformable polymers used for
joints between RC frames and masonry infills.
Engineering Transactions. 2017, vol. 65, no. 1, str. 113-121, ilustr. ISSN 0867-888X.
http://et.ippt.gov.pl/index.php/et/article/view/753/607. [COBISS.SI-ID
2277479]
6.
STANIĆ, Andjelka, BRANK, Boštjan, KORELC, Jože. On path-following methods for structural
failure problems.
Computational mechanics. avg. 2016, letn. 58, št. 2, str. 281-306, ilustr. ISSN 0178-7675. DOI:
10.1007/s00466-016-1294-y. [COBISS.SI-ID
7456097]
7.
HUDOBIVNIK, Blaž, KORELC, Jože. Closed-form representation of matrix functions in
the formulation of nonlinear material models.
Finite elements in analysis and design. [Print ed.]. apr. 2016, letn. 111, str. 19-32, ilustr. ISSN 0168-874X. DOI:
10.1016/j.finel.2015.12.002. [COBISS.SI-ID
7327329]
8.
MELINK, Teja, KORELC, Jože. Metoda stohastičnih končnih elementov v modeliranju konstrukcij
= Stochastic finite element method in structure modelling.
Gradbeni vestnik : glasilo Zveze društev gradbenih inženirjev in tehnikov Slovenije. [Tiskana izd.]. maj 2016, letn. 65, str. 109-116, ilustr. ISSN 0017-2774.
http://www.dlib.si/details/URN:NBN:SI:doc-HS10TDJ4. [COBISS.SI-ID
7480417]
9.
ŠOLINC, Urša, KORELC, Jože. A simple way to improved formulation of FE2 analysis.
Computational mechanics. 2015, letn. 56, št. 5, str. 905-915, ilustr. ISSN 0178-7675. DOI:
10.1007/s00466-015-1208-4. [COBISS.SI-ID
7244129]
10.
KORELC, Jože, STUPKIEWICZ, Stanisław. Closed-form matrix exponential and its application
in finite-strain plasticity.
International journal for numerical methods in engineering. [Print ed.]. 2014, letn. 98, št. 13, str. 960-987, ilustr. ISSN 0029-5981. DOI:
10.1002/nme.4653. [COBISS.SI-ID
6526817]
11.
MELINK, Teja, KORELC, Jože. Stability of Karhunen- Loève expansion for the simulation
of Gaussian stochastic fields using Galerkin scheme.
Probabilistic engineering mechanics. [Print ed.]. jul. 2014, letn. 37, str. 7-15, ilustr. ISSN 0266-8920. DOI:
10.1016/j.probengmech.2014.03.006. [COBISS.SI-ID
6653793]
13.
LENGIEWICZ, Jakub, KORELC, Jože, STUPKIEWICZ, Stanislaw. Automation of finite element
formulations for large deformation contact problems.
International journal for numerical methods in engineering. [Print ed.]. mar. 2011, letn. 85, št. 10, str. 1252-1279, ilustr. ISSN 0029-5981.
DOI:
10.1002/nme.3009. [COBISS.SI-ID
5103969]
14.
LAMUT, Martin, KORELC, Jože, RODIČ, Tomaž. Multiscale modelling of heterogeneous materials
= Mikro in makro modeliranje heterogenih materialov.
Materiali in tehnologije. [Tiskana izd.]. 2011, letn. 45, št. 5, str. 421-426, graf. prikazi. ISSN 1580-2949.
http://www.dlib.si/details/URN:NBN:SI:DOC-4RQMVN0H. [COBISS.SI-ID
1160799]
15.
KORELC, Jože, ŠOLINC, Urša, WRIGGERS, Peter. An improved EAS brick element for finite
deformation.
Computational mechanics. 2010, letn. 46, št. 4, str. 641-659, ilustr. ISSN 0178-7675. DOI:
10.1007/s00466-010-0506-0. [COBISS.SI-ID
5052257]
16.
STUPKIEWIZS, Stanislaw, LENGIEWITCZ, Jakub, KORELC, Jože. Sensitivity analysis for
frictional contact problems in the augmented Lagrangian formulation.
Computer methods in applied mechanics and engineering. [Print ed.]. julij 2010, letn. 199, št. 33-36, str. 2165-2176, ilustr. ISSN 0045-7825.
DOI:
10.1016/j.cma.2010.03.021. [COBISS.SI-ID
5001825]
17.
KORELC, Jože. Direct computation of critical points based on Crout's elimination and
diagonal subset test function.
Computers & Structures. [Print ed.]. februar 2010, letn. 88, št. 3-4, str. 189-197, ilustr. ISSN 0045-7949.
DOI:
10.1016/j.compstruc.2009.10.001. [COBISS.SI-ID
4793697]
18.
RODIČ, Tomaž, ŠUŠTAR, Tomaž, ŠUŠTARIČ, Primož, KORELC, Jože. Efficient numerical implementation
of pressure, time and temperature superposition for elasto-visco-plastic material
model by using a symbolic approach.
International journal for numerical methods in engineering. [Print ed.]. okt. 2010, letn. 84, št. 4, str. 470-484, ilustr. ISSN 0029-5981. DOI:
10.1002/nme.2903. [COBISS.SI-ID
5006433]
19.
KORELC, Jože. Automation of primal and sensitivity analysis of transient coupled problems.
Computational mechanics. 2009, letn. 44, št. 5, str. 631-649, ilustr. ISSN 0178-7675. DOI:
10.1007/s00466-009-0395-2. [COBISS.SI-ID
4708193]
20.
KRISTANIČ, Niko, KORELC, Jože. Optimization method for the determination of the most
unfavorable imperfection of structures.
Computational mechanics. 2008, issue 6, vol. 42, str. 859-872, ilustr. ISSN 0178-7675. DOI:
10.1007/s00466-008-0288-9. [COBISS.SI-ID
4014689]
21.
RODIČ, Tomaž, KORELC, Jože, PRISTOVŠEK, Anton. A micro-macro analysis of the tool
damage in precision forming = Mikro-makroanaliza poškodb orodja za natančno kovanje.
Materiali in tehnologije. [Tiskana izd.]. 2006, letn. 40, št. 6, str. 243-246. ISSN 1580-2949.
http://www.dlib.si/details/URN:NBN:SI:DOC-TL770NBJ. [COBISS.SI-ID
579242]
22.
BRANK, Boštjan, KORELC, Jože, IBRAHIMBEGOVIĆ, Adnan. Dynamic and time-stepping schemes
for elastic shells undergoing finite rotations.
Computers & Structures. [Print ed.]. 2003, vol. 81, issue 12, str. 1193-1210, graf. prikazi. ISSN 0045-7949.
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=32205. [COBISS.SI-ID
1916001]
23.
STADLER, Michael, HOLZAPFEL, Gerhard A., KORELC, Jože. Cn-continuous modelling of
smooth contact surfaces using NURBS and application to 2D problems.
International journal for numerical methods in engineering. [Print ed.]. 2003, letn. 57, št. 15, str. 2177-2203, graf. prikazi. ISSN 0029-5981.
DOI:
10.1002/nme.776. [COBISS.SI-ID
2149729]
24.
KUNC, Robert, PREBIL, Ivan, RODIČ, Tomaž, KORELC, Jože. Low cycle elastoplastic properties
of normalised and tempered 42CrMo4 steel.
Materials science and technology. November 2002, letn. 18, str. 1363-1368. ISSN 0267-0836. [COBISS.SI-ID
5579291]
25.
KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter, KORELC, Jože. A C1-continuous formulation
for 3D finite deformation frictional contact.
Computational mechanics. 2002, vol. 29, issue 1, str. 27-42, ilustr. ISSN 0178-7675. [COBISS.SI-ID
1658465]
26.
STUPKIEWICZ, Stanislaw, KORELC, Jože, DUTKO, Martin, RODIČ, Tomaž. Shape sensitivity
analysis of large deformation frictional contact problems.
Computer methods in applied mechanics and engineering. [Print ed.]. 2002, vol. 191, issue 33, str. 3555-3581, ilustr. ISSN 0045-7825. [COBISS.SI-ID
1658977]
27.
BRANK, Boštjan, KORELC, Jože, IBRAHIMBEGOVIĆ, Adnan. Nonlinear shell problem formulation
accounting for through-the-tickness stretching and its finite element implementation.
Computers & Structures. [Print ed.]. 2002, vol. 80, n. 9/10, str. 699-717, ilustr. ISSN 0045-7949. [COBISS.SI-ID
1656929]
28.
KORELC, Jože. Multi-language and multi-environment generation of nonlinear finite
element codes.
Engineering with computers. 2002, vol. 18, n. 4, str. 312-327, ilustr. ISSN 0177-0667. [COBISS.SI-ID
1932385]
29.
WRIGGERS, Peter, KRSTULOVIĆ-OPARA, Lovre, KORELC, Jože. Smooth C1-interpolations for
two-dimensional frictional contact problems.
International journal for numerical methods in engineering. [Print ed.]. 2001, vol. 51, issue 12, str. 1469-1495, ilustr. ISSN 0029-5981. [COBISS.SI-ID
1379425]
30.
KUNC, Robert, PREBIL, Ivan, KORELC, Jože, RODIČ, Tomaž, TORKAR, Matjaž. Določanje
snovnih lastnosti materiala za računanje nosilnosti velikih kotalnih ležajev z mehaniko
poškodbe = Determination of material properties for the calculation of large rolling
bearing carrying capacity using damage mechanics.
Materiali in tehnologije. [Tiskana izd.]. 2001, letn. 35, št. 3/4, str. 107-112. ISSN 1580-2949. [COBISS.SI-ID
4557339]
31.
KORELC, Jože. Multi-language approach in automatic generation of numerical procedures.
V: MEIER, Gerd Emil Alexander (ur.).
Short communications in mathematics and mechanics, section 9-25, Annual Meeting, University
of Göttingen, Germany, April 2-7, 2000. Berlin: Wiley-VCH, 2001. Str. 723-724, ilustr. Zeitschrift für Angewandte Mathematik
und Mechanik, Vol. 81, suppl. 3. ISSN 0946-8463. [COBISS.SI-ID
1378657]
32.
KORELC, Jože. Automatic derivation of sensivity terms for mixed Galerkin-collocation
problems. V:
Short communications in mathematics and mechanics, section 1-7, GAMM 99, Annual Meeting,
University of Metz, France, April 12-16, 1999. Berlin: Wiley-VCH, 2000. Vol. 80, suppl. 2, str. 533-534, ilustr. Zeitschrift für
Angewandte Mathematik und Mechanik, Vol. 80, suppl. 2. ISSN 0946-8463. [COBISS.SI-ID
1000545]
33.
KORELC, Jože, WRIGGERS, Peter. Computer Algebra and automatic differentation in derivation
of finite element code.
Zeitschrift für angewandte Mathematik und Mechanik. 1999, vol. 79, suppl. 3, str. 811-812, ilustr. ISSN 0044-2267. [COBISS.SI-ID
685921]
34.
KORELC, Jože, WRIGGERS, Peter. Improved enhanced strain four-node element with Taylor
expansion of the shape functions.
International journal for numerical methods in engineering. [Print ed.]. 1997, vol. 40, no. 3, str. 407-421, graf. prikazi. ISSN 0029-5981.
[COBISS.SI-ID
142433]
35.
KORELC, Jože. Automatic generation of finite-element code by simultaneous optimization
of expressions.
Theoretical computer science. 1997, vol. 187, str. 231-248. ISSN 0304-3975. [COBISS.SI-ID
652897]
36.
KORELC, Jože, WRIGGERS, Peter. Consistent gradient formulation for a stable enhanced
strain method for large deformations.
Engineering computations. 1996, vol. 13, no. 1, str. 103-123, graf. prikazi. ISSN 0264-4401. [COBISS.SI-ID
143201]
37.
KORELC, Jože, BANOVEC, Jurij. Spline finite strip analysis shells using longitudional
connection between strips.
Zeitschrift für angewandte Mathematik und Mechanik. 1995, vol. 75, 4, str. 263-264, graf. prikazi. ISSN 0044-2267. [COBISS.SI-ID
143969]
38.
KORELC, Jože, WRIGGERS, P. An efficient 3D enhanced strain element with Taylor expansion
of the shape functions.
Computational mechanics. 1996, vol. 19, no. 1, str. 20-40, graf. prikazi. ISSN 0178-7675. [COBISS.SI-ID
140897]
39.
BANOVEC, Jurij, BEG, Darko, KORELC, Jože. PAKON - programski paket za analizu konstrukcija.
Građevinar. 1990, god. 42, br. 12, str. 529-533, graf. prikazi. ISSN 0350-2465. [COBISS.SI-ID
20367106]
1.02 Pregledni znanstveni članek
40.
RODIČ, Tomaž, KORELC, Jože, DUTKO, M., OWEN, D.R.J. Automatic optimisation of perform
and tool design in forging.
ESAFORM bulletin. 1999, vol. 1, no. 1, str. 8-9, ilustr. [COBISS.SI-ID
130655]
41.
WRIGGERS, Peter, KORELC, Jože. On enhanced strain methods for small and finite deformations
of solids.
Computational mechanics. 1996, vol. 18, no. 6, str. 413-428, graf. prikazi. ISSN 0178-7675. [COBISS.SI-ID
141153]
1.06 Objavljeni znanstveni prispevek na konferenci (vabljeno predavanje)
42.
KORELC, Jože. Symbolic formulation and automatic derivation of complex material models.
V: IBRAHIMBEGOVIĆ, Adnan (ur.), BRANK, Boštjan (ur.).
Multi-physics and multi-scale computer models in nonlinear analysis and optimal design
of engineering structures under extreme conditions : proceedings. NATO Advanced Research Workshop, Bled, Slovenija, June 13-17 2004. V Ljubljani:
Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo, 2004. Str. 517-526,
ilustr. ISBN 961-6167-60-X. [COBISS.SI-ID
2652001]
43.
RODIČ, Tomaž, KORELC, Jože, DUTKO, M..., PRISTOVŠEK, Anton. Sensitivity analysis of
cold forging dies with respect to parameters influencig fatigue due to cyclic plasticity.
V: PIETRZYK, Maciej (ur.), MITURA, Zbigniew (ur.), KACZMAR, Jacek (ur.).
The 5th International ESAFORM Conference on Material Forming, Kraków, April 14-17,
2002. 1st ed. Kraków: "Akapit", 2002. Str. 43-46. ISBN 83-7108-098-0. [COBISS.SI-ID
553567]
44.
IBRAHIMBEGOVIĆ, Adnan, BRANK, Boštjan, KORELC, Jože. Nonlinear shell problem formulation
accounting for through-the-thickness stretching and its finite element implementation.
V: TOPPING, Barry H. V. (ur.), BITTNAR, Zdeněk (ur.).
Computational structures technology. Edinburgh: Saxe-Coburg, 2002. Str. 33-62, graf. prikazi. ISBN 1-874672-16-4.
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=32200. [COBISS.SI-ID
1793889]
45.
RODIČ, Tomaž, KORELC, Jože, DUTKO, Martin, PRISTOVŠEK, Anton, KUNC, Robert, HÄNSEL,
Matthias. Cyclic plasticity and damage of cold forging tool for production of automotive
shift fork. V: KUZMAN, Karl (ur.).
Conference proceedings. 3rd International Conference on Industrial Tools ICIT 2001, Rogaška Slatina, Celje,
Slovenia, April 22-26, 2001. Celje: TECOS, [2001]. Str. 331-334 in [527.pdf]. ISBN
961-90401-5-5. [COBISS.SI-ID
4349467]
46.
RODIČ, Tomaž, KORELC, Jože, GREŠOVNIK, Igor. Inverse analyses and optimisation of
cold forging processes. V:
First ESAFORM conference on material forming, Sophia-Antipolis (France), 17-20 March
1998. [Paris]: [S. n.], 1998. Str. 255-258. [COBISS.SI-ID
26719]
47.
KORELC, Jože, WRIGGERS, Peter. Symbolic approach in computational mechanics. V: OWEN,
D... R... J... (ur.).
Computational plasticity : fundamentals and applications : proceedings of the Fifth
international conference on computational plasticity held in Barcelona, Spain, 17th-20th
March 1997. 1st ed. Barcelona: International center for numerical methods in Engineering (CIMNE),
1997. Str. 286-304. ISBN 84-87867-71-5, ISBN 84-87867-87-1, ISBN 84-87867-88-X. [COBISS.SI-ID
146785]
1.08 Objavljeni znanstveni prispevek na konferenci
48.
KOČMAN, Peter, KORELC, Jože. Topološka optimizacija domene z upoštevanjem povezanega
toplotno mehanskega odziva = Topological optimization of the domain with considering
the coupled thermo-mechanical response. V: SLAVIČ, Janko (ur.), ČESNIK, Martin (ur.).
Kuhljevi dnevi 2023 : zbornik del : Bled, 21.–22. september 2023. Ljubljana: Slovensko društvo za mehaniko, 2023. Str. 109-118, ilustr. ISBN 978-961-93859-8-2.
http://www.drustvozamehaniko.si/zbornik/ZbornikKD2023.pdf. [COBISS.SI-ID
165728003]
49.
ZUPAN, Nina, KORELC, Jože. Advantages of automatic-differentiation-based formulation
and sensitivity analysis based implementation of multiscale methods. V:
The 13th World congress on computational mechanics (WCCM XIII) [and] 2nd Pan American
congress on computational mechanics (PANACM II) July 22-27, 2018, New York, USA. New York: WWCM, 2018. Str. 1-10, ilustr.
http://www.wccm2018.org/sites/default/files/WCCM_Abstracts_U-Z.pdf. [COBISS.SI-ID
8521313]
50.
ZUPAN, Nina, KORELC, Jože. Efficient multi-scale modelling of path dependent problems
- COMPLAS 2017. V: OÑATE, Eugenio (ur.).
Computational Plasticity XIV : Proceedings of the XIV International Conference on
Computational Plasticity - Fundamentals and Applications held in Barcelona, Spain
5-7 September 2017. XIV International Conference on Computational Plasticity - Fundamentals and Applications,
held in Barcelona, Spain 5-7 September 2017. Barcelona: International Center for Numerical
Methods in Engineering (CIMNE), 2017. Str. 926-934, ilustr. ISBN 978-84-946909-6-9.
http://congress.cimne.com/complas2017/frontal/Doc/EbookCOMPLAS2017.pdf. [COBISS.SI-ID
8311905]
51.
KWIECIEŃ, Arkadiusz, GAMS, Matija, VISKOVIC, Alberto, KISIEL, Paweł, KORELC, Jože,
ROUSAKIS, Theodoros. Use of polymer flexible joint between RC frames and masonry infills
for improved seismic performance. V: MOTAVALLI, Masoud (ur.).
Conference proceedings. Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures,
SMAR 2017, 13-15 September 2017, Zurich, Switzerland. Dübendorf: EMPA, 2017. Str.
1-8, ilustr.
http://www.smar-conferences.org/smar/SMAR_2017_Proceedings/papers/179.pdf. [COBISS.SI-ID
2324071]
52.
GAMS, Matija, KWIECIEŃ, Arkadiusz, KORELC, Jože, ROUSAKIS, Theodoros, VISKOVIC, Alberto.
Modelling of deformable polymer to be used for joints between infill masonry walls
and r.c. frames.
Procedia engineering, International Conference on Analytical Models and New Concepts in Concrete and Masonry
Structures AMCMʼ2017. 2017, vol. 193, str. 455-461, ilustr. ISSN 1877-7058.
http://www.sciencedirect.com/science/article/pii/S1877705817327352. [COBISS.SI-ID
2313063]
53.
STANIĆ, Andjelka, BRANK, Boštjan, KORELC, Jože, IBRAHIMBEGOVIĆ, Adnan. Tracing equilibrium
paths of structures with evolving cracks. V: IBRAHIMBEGOVIĆ, Adnan (ur.).
ECCOMAS 2nd International Conference on "Multi-scale Computational Methods for Solids
and Fluids", June 10-12, 2015, Sarajevo, Bosnia and Herzegovina. Paris: Eccomas, 2015. Str. 36-37. [COBISS.SI-ID
7405153]
54.
HUDOBIVNIK, Blaž, KORELC, Jože. Error free evaluation of tensor functions and their
application in finite-strain models. V: OÑATE, Eugenio (ur.), OLIVER, Xavier (ur.),
HUERTA, Antonio (ur.).
11th World Congress on Computational Mechanics (WCCM XI) and 5th European Conference
on Computational Mechanics (ECCM V) and 6th European Conference on Computational Fluid
Dynamics (ECFD VI), 20-25 July 2014, Barcelona, Spain. Barcelona: [S.n.], 2014. Str. 1-12, ilustr.
http://wccm-eccm-ecfd2014.org/admin/files/filePaper/p2284.pdf. [COBISS.SI-ID
6681441]
55.
HUDOBIVNIK, Blaž, KORELC, Jože, ŠOLINC, Urša, LIMBERT, Georges. Optimizacija gubanja
modela umetne kože z izoparametričnimi in izogeometričnimi končnimi elementi = Optimization
of wrinkling of artificial skin model with isoparametric and isogeometric finite elements.
V: HRIBERŠEK, Matjaž (ur.), RAVNIK, Jure (ur.).
Zbornik del. Kuhljevi dnevi 2014, Maribor, 24.-25. september, 2014. Ljubljana: Slovensko društvo
za mehaniko, 2014. Str. 63-70, ilustr. ISBN 978-961-91659-9-7. [COBISS.SI-ID
6773089]
56.
HUDOBIVNIK, Blaž, KORELC, Jože. Automatic differentiation based formulation of coupled
problems. V: IDELSOHN, S. (ur.), PAPADRAKAKIS, Manolis (ur.), SCHREFLER, Bernhard
(ur.).
Computational methods for coupled problems in science and engineering V : proceedings
of the V International Conference on Computational Methods for Coupled Problems in
Science and Engineering held in Ibiza, Spain 17-19 June 2013. Barcelona: International Center for Numerical Methods in Engineering, 2013. Str.
1331-1342, ilustr. ISBN 978-84-941407-6-1.
http://congress.cimne.com/coupled2013/proceedings/full/p677.pdf. [COBISS.SI-ID
6275169]
57.
ŠOLINC, Urša, KORELC, Jože. Automation of isogeometric formulation and efficiency
consideration. V: OÑATE, Eugenio (ur.).
Computational Plasticity XII : proceedings of the XII International Conference on
Computational Plasticity - Fundamentals and Applications, COMPLAST XII, Barcelona,
Spain 3 - 5 September 2013. XII International Conference on Computational Plasticity - Fundamentals and Applications,
COMPLAST XII, Barcelona, Spain 3 - 5 September 2013. Barcelona: International Center
for Numerical Methods in Engineering (CIMNE), 2013. Str. 1-7, ilustr. ISBN 978-84-941531-5-0.
[COBISS.SI-ID
6457185]
58.
CLASEN, Heiko, HIRSCHBERGER, C. Britta, KORELC, Jože, WRIGGERS, Peter. FE2-homogenization
of micromorphic elasto-plastic materials. V: OÑATE, Eugenio (ur.).
Computational Plasticity XII : proceedings of the XII International Conference on
Computational Plasticity - Fundamentals and Applications, COMPLAST XII, Barcelona,
Spain 3 - 5 September 2013. XII International Conference on Computational Plasticity - Fundamentals and Applications,
COMPLAST XII, Barcelona, Spain 3 - 5 September 2013. Barcelona: International Center
for Numerical Methods in Engineering (CIMNE), 2013. Str. 1-12, ilustr. ISBN 978-84-941531-5-0.
http://congress.cimne.com/complas2013/proceedings/full/p524.pdf. [COBISS.SI-ID
7481441]
59.
HUDOBIVNIK, Blaž, KORELC, Jože. Matrična potenčna vsota v zaključeni obliki in njena
uporaba v hiperelastičnih materialnih modelih = Closed form matrix power sum and its
application in hyper-elastic material models. V: HRIBERŠEK, Matjaž (ur.), RAVNIK,
Jure (ur.).
Zbornik del. Kuhljevi dnevi 2013, Rogaška Slatina, 25.-26. september, 2013. Ljubljana: SDM -
Slovensko društvo za mehaniko, 2013. Str. 65-72, ilustr. ISBN 978-961-91659-8-0. [COBISS.SI-ID
6341217]
60.
KORELC, Jože. Automation of Finite Element Method. V: ALLIX, Olivier (ur.).
Advanced Computational Engineering. Workshops at Oberwolfach, February 12th - February 18th, 2012. [s. l.]: Mathematisches
Forschungsinstitut Oberwolfach, 2012. Str. 534-537.
https://www.mfo.de/occasion/1207/www_view. [COBISS.SI-ID
7497313]
61.
MELINK, Teja, KORELC, Jože. Automation of stochastic finite element method. V:
ECCOMAS 2012 CD-ROM Proceedings : Proceedings of the 6th European Congress on Computational
Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012,
Vienna, Austria. 6th European Congress on Computational Methods in Applied Sciences and Engineering
(ECCOMAS 2012), September 10-14, 2012, Vienna, Austria. Vienna: University of Technology,
2012. Str. 1-17, ilustr. ISBN 978-3-9502481-9-7. [COBISS.SI-ID
5970529]
62.
HUDOBIVNIK, Blaž, KORELC, Jože. Na avtomatskem odvajanju bazirana formulacija povezanih
problemov = On automatic differentiation based formulation of coupled problems. V:
HRIBERŠEK, Matjaž (ur.), RAVNIK, Jure (ur.).
Zbornik del. Kuhljevi dnevi 2012, Rogaška Slatina, 26.-27. september, 2012. Ljubljana: Slovensko
društvo za mehaniko, 2012. Str. 65-72, ilustr. ISBN 978-961-91659-7-3. [COBISS.SI-ID
5993313]
63.
MELINK, Teja, KORELC, Jože. Občutljivostna analiza drugega reda časovno odvisnih lokalno
povezanih problemov = Second-Order Sensitivity Analysis for Time Dependent Locally
Coupled Problems. V: HRIBERŠEK, Matjaž (ur.), RAVNIK, Jure (ur.).
Zbornik del. Kuhljevi dnevi 2012, Rogaška Slatina, 26.-27. september, 2012. Ljubljana: Slovensko
društvo za mehaniko, 2012. Str. 153-160, ilustr. ISBN 978-961-91659-7-3. [COBISS.SI-ID
5993569]
64.
ŠOLINC, Urša, KORELC, Jože, WRIGGERS, Peter. Izboljšan tridimenzionalni EAS končni
element za končne deformacije = An improved EAS brick element for finite deformation.
V: ŠIROK, Brane (ur.), EBERLINC, Matjaž (ur.).
Zbornik del. Kuhljevi dnevi, 23. september 2010, Ljubljana. Ljubljana: SDM - Slovensko društvo
za mehaniko, 2010. Str. 249-256, graf. prikazi. ISBN 978-961-91659-5-9. [COBISS.SI-ID
5136481]
65.
MELINK, Teja, KORELC, Jože. Upoštevanje korelacije pri stohastični analizi konstrukcij
= Effect of correlation in stochastic structural analysis. V: LOPATIČ, Jože (ur.),
MARKELJ, Viktor (ur.), SAJE, Franc (ur.).
[Zbornik]. 32. zborovanje gradbenih konstruktorjev Slovenije, Bled, 7.-8. oktober 2010. Ljubljana:
Slovensko društvo gradbenih konstruktorjev, 2010. Str. 327-334, ilustr. ISBN 978-961-91691-5-5.
[COBISS.SI-ID
5243745]
66.
KORELC, Jože. Semi-analytical solution of large-scale finite element models. V:
Proceedings of the 6th International Congress of Croatian Society of Mechanics Dubrovnik,
Croatia, September 30 - October 2, 2009. Zagreb: Croatian Society of Mechanics, cop. 2009. 8 str., ilustr. Besedilni podatki.
ISBN 978-953-7539-11-5. [COBISS.SI-ID
4795745]
67.
MELINK, Teja, KORELC, Jože. Stabilna implementacija metode stohastičnih končnih elementov
= Stable Stochastic Finite Element Method. V: BOLTEŽAR, Miha (ur.), SLAVIČ, Janko
(ur.).
Zbornik del. Kuhljevi dnevi, 24. September 2009, Cerklje na Gorenjskem. Ljubljana: Slovensko
društvo za mehaniko, 2009. Str. 73-80, ilustr. ISBN 978-961-91659-4-2. [COBISS.SI-ID
4784481]
68.
KORELC, Jože. Symbolic-numeric duality of nonlinear finite element environment AceFEM.
V:
9th International Mathematica Symposium : June 20-24 2008, Maastricht, the Netherlands
: electronic proceedings. S.l.: s.n., 2008. 10 str., ilustr. [COBISS.SI-ID
4885857]
69.
KRISTANIČ, Niko, KORELC, Jože. Direct determination of the most unfavorable imperfections
of thin-walled structures. V: SORIĆ, Jurica (ur.).
Advanced numerical analysis of shell-like structures : proceedings of special workshop,
[September 26-28, 2007, Zagreb, Croatia]. Zagreb: Croatian Society of Mechanics, 2007. Str. 195-202, ilustr. ISBN 978-953-7539-00-9.
[COBISS.SI-ID
3763809]
70.
KRISTANIČ, Niko, KORELC, Jože. Določitev najbolj neugodne začetne nepopolnosti v primeru
velikih nepopolnosti = Determination of the most unfavorable imperfection in the case
of large imperfections. V: KORELC, Jože (ur.), ZUPAN, Dejan (ur.).
Zbornik del. Kuhljevi dnevi 2007, Snovik, 20.-21. september 2007. Ljubljana: Slovensko društvo
za mehaniko, 2007. Str. 139-146, ilustr. ISBN 978-961-91659-2-8. [COBISS.SI-ID
3764321]
71.
LENGIEWITCZ, Jakub, STUPKIEWIZS, S..., KORELC, Jože, RODIČ, Tomaž. DDM-based sensitivity
analysis and optimization for smooth contact formulations. V: WRIGGERS, Peter (ur.),
NACKENHORST, Udo (ur.).
Analysis and simulation of contact problems. Berlin: Springer-Verlag, cop. 2006. Str. 79-86, ilustr. Lecture notes in applied
and computational mechanics, vol. 27. ISBN 3-540-31760-0, ISBN 9-783-540-31760-9.
[COBISS.SI-ID
3766369]
72.
KORELC, Jože, LENGIEWITCZ, Jakub, STUPKIEWIZS, S... A study of symbolic description,
numerical efficiency and accuracy of 2D and 3D contact formulations. V: WRIGGERS,
Peter (ur.), NACKENHORST, Udo (ur.).
Analysis and simulation of contact problems. Berlin: Springer-Verlag, cop. 2006. Str. 111-118, ilustr. Lecture notes in applied
and computational mechanics, vol. 27. ISBN 3-540-31760-0, ISBN 9-783-540-31760-9.
[COBISS.SI-ID
3766625]
73.
DUJC, Jaka, BRANK, Boštjan, KORELC, Jože. Konstitutivni model armiranega betona za
analizo mejne nosilnosti plošč = A constitutive model for limit load analysis of reinforced
concrete plates. V: KORELC, Jože (ur.), ZUPAN, Dejan (ur.).
Zbornik del. Kuhljevi dnevi 2006, Lipica, 21.-22. september 2006. Ljubljana: Slovensko društvo
za mehaniko, 2006. Str. [65]-72, graf. prikazi. ISBN 961-91659-1-8, ISBN 978-961-91659-1-1.
[COBISS.SI-ID
3301729]
74.
KRISTANIČ, Niko, KORELC, Jože. Določitev najbolj neugodne začetne nepopolnosti konstrukcij
na podlagi občutljivostne analize = determination of the most unfavorable imperfection
of structures on the basis of sensitivity analysis. V: KORELC, Jože (ur.), ZUPAN,
Dejan (ur.).
Zbornik del. Kuhljevi dnevi 2006, Lipica, 21.-22. september 2006. Ljubljana: Slovensko društvo
za mehaniko, 2006. Str. [165]-172, graf. prikazi. ISBN 961-91659-1-8, ISBN 978-961-91659-1-1.
[COBISS.SI-ID
3309665]
75.
LENGIEWITCZ, Jakub, STUPKIEWIZS, S..., RODIČ, Tomaž, KORELC, Jože, ŠUŠTARIČ, Primož.
Contact smoothing in sensitivity analysis and optimization of multi-body contact problems.
V: OÑATE, Eugenio (ur.).
Computational plasticity : fundamentals and applications : proceedings of the eighth
international conference on computational plasticity held in Barcelona, Spain, 5th-7th
September, 2005. Part 1. Swansea: CIMNE, 2005. 376-379 f. ISBN 84-95999-78-1. [COBISS.SI-ID
558687]
76.
KORELC, Jože, KRISTANIČ, Niko. Evaluation of Design Velocity Field by Direct Differentiation
of Symbolically Parameterized Mesh. V: OÑATE, Eugenio (ur.).
Computational plasticity : fundamentals and applications : proceedings of the eighth
international conference on computational plasticity held in Barcelona, Spain, 5th-7th
September, 2005. Part 1. Swansea: CIMNE, 2005. Str. 380-383. ISBN 84-95999-78-1. [COBISS.SI-ID
3040097]
77.
ŠUŠTAR, Tomaž, KORELC, Jože, RODIČ, Tomaž. Optimization of induction heating parameters
with respect to final shape of the preform. V: OÑATE, Eugenio (ur.).
Computational plasticity : fundamentals and applications : proceedings of the eighth
international conference on computational plasticity held in Barcelona, Spain, 5th-7th
September, 2005. Part 1. Swansea: CIMNE, 2005. 384-387 f. ISBN 84-95999-78-1. [COBISS.SI-ID
558175]
78.
SKUBER, Peter, KORELC, Jože, BEG, Darko. Damage mechanics approach to low-cycle fatigue
of steel structures. V: HOFFMEISTER, Bernhard (ur.).
Eurosteel 2005 : 4th European conference on steel and composite structures, Maastricht,
June 8-10, 2005 : research, eurocodes, practice. Vol. B. Aachen: Druck und Verlagshaus Mainz, 2005. Str. 1.12-17-1.12-24, graf. prikazi.
ISBN 3-86130-812-6. [COBISS.SI-ID
3013985]
79.
KORELC, Jože. Automatic Generation of Numerical Codes. V:
Wolfram Technology Conference 2005 : October 5th - October 8th, 2005. [S.l], 2005. Str. [1-20], graf. prikazi. [COBISS.SI-ID
2999393]
80.
KRISTANIČ, Niko, KORELC, Jože. Simbolno - numerični pristop k občutljivostni analizi
in optimizaciji konstrukcij = Evaluation of design velocity field and optimization
by direct differentiation of symbolically parameterized mesh. V: KORELC, Jože (ur.),
ZUPAN, Dejan (ur.).
Zbornik del. Kuhljevi dnevi 2005, Podčetrtek, 22.-23. september 2005. Ljubljana: Slovensko društvo
za mehaniko, 2005. Str. 167-174, ilustr. ISBN 961-91659-0-X. [COBISS.SI-ID
2996065]
81.
KORELC, Jože. Interactive Debugging of Automatically Generated Numerical Code. V:
MITIC, Peter (ur.).
New Ideas in Symbolic Computation : Proceedings of the 6th International Mathematica
Symposium. Hampshire, UK: Positive Corporation Ltd., 2004. Str. [1-20], graf. prikazi. ISBN
0-9547810-0-7. [COBISS.SI-ID
2654305]
82.
SKUBER, Peter, BEG, Darko, KORELC, Jože. Nizkociklično utrujanje konstrukcijskega
jekla. V: KORELC, Jože (ur.), ZUPAN, Dejan (ur.).
Zbornik del. Kuhljevi dnevi 2004, Otočec, 30. september - 1. oktober 2004. Ljubljana: Slovensko
društvo za mehaniko, 2004. Str. 277-284, ilustr. ISBN 961-90000-9-9. [COBISS.SI-ID
2652257]
83.
KORELC, Jože. Automatic Generation of Numerical Code. V: MITIC, Peter (ur.).
Challenging the boundaries of symbolic computation : proceedings of the 5th International
Mathematica Symposium. London: Imperial College Press, cop. 2003. Str. 9-16. ISBN 1-86094-363-2. [COBISS.SI-ID
2148961]
84.
BRANK, Boštjan, IBRAHIMBEGOVIĆ, Adnan, KORELC, Jože. On dynamics and large strain
analysis of shells. V: BATHE, Klaus-Jürgen (ur.).
Computational fluid and solid mechanics : proceedings, Second MIT Conference on Computational
Fluid and Solid Mechanics, June 17-20, 2003. Oxford: Elsevier Science, 2003. Str. 143-144, graf. prikazi. ISBN 0-08-044048-7,
ISBN 0-08-044046-0, ISBN 0-08-044047-9. [COBISS.SI-ID
2370401]
85.
SKUBER, Peter, BEG, Darko, KORELC, Jože. Numerično modeliranje nizkocikličnega utrujanja
jeklenih konstrukcij z mehaniko poškodb. V: SAJE, Franc (ur.), LOPATIČ, Jože (ur.).
Zbornik 25. zborovanja gradbenih konstruktorjev Slovenije, Rogaška Slatina, 23.-24.
oktober 2003. Ljubljana: Slovensko društvo gradbenih konstruktorjev, 2003. Str. 233-240, ilustr.
ISBN 961-90266-8-3. [COBISS.SI-ID
2149217]
86.
KUNC, Robert, PREBIL, Ivan, RODIČ, Tomaž, KORELC, Jože. Application of damage model
for numerical determination of carrying capacity of large rolling bearings. V: MARJANOVIĆ,
Dorian (ur.).
Proceedings of the 7th International Design Conference DESIGN 2002, Cavtat, Dubrovnik,
Croatia, May 14-17, 2002. Zagreb: Faculty of Mechanical Engineering and Naval Architecture; Glasgow: The Design
Society, cop. 2002. Vol. 1, str. 661-666. ISBN 953-6313-45-6, ISBN 953-6313-46-4.
[COBISS.SI-ID
5189147]
87.
STADLER, Michael, HOLZAPFEL, Gerhard A., KORELC, Jože. NURBS - based smooth surface
contact for the numerical simulation of balloon angioplasty. V: MANG, H. A. (ur.),
RAMMERSTORFER, F. G. (ur.), EBERHARDSTEINER, J. (ur.).
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July
7-12, 2002, Vienna, Austria. Vienna: University of technology, Institute for strenght of materials, Institute
for lightweight structures and aerospace engineering, 2002. Str. [1-10], graf. prikazi.
ISBN 3-9501554-0-6. [COBISS.SI-ID
1737569]
88.
KORELC, Jože. Shape and parameter sensitivity analysis of stability points. V: MANG,
H. A. (ur.), RAMMERSTORFER, F. G. (ur.), EBERHARDSTEINER, J. (ur.).
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July
7-12, 2002, Vienna, Austria. Vienna: University of technology, Institute for strenght of materials, Institute
for lightweight structures and aerospace engineering, 2002. Str. [1-10], graf. prikazi.
ISBN 3-9501554-0-6. [COBISS.SI-ID
1737313]
89.
BRANK, Boštjan, KORELC, Jože, IBRAHIMBEGOVIĆ, Adnan. Shell formulations with through-the-thickness
stretching. V: MANG, H. A. (ur.), RAMMERSTORFER, F. G. (ur.), EBERHARDSTEINER, J.
(ur.).
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July
7-12, 2002, Vienna, Austria. Vienna: University of technology, Institute for strenght of materials, Institute
for lightweight structures and aerospace engineering, 2002. Str. 1-10, graf. prikazi.
ISBN 3-9501554-0-6. [COBISS.SI-ID
1684065]
90.
KUNC, Robert, PREBIL, Ivan, RODIČ, Tomaž, KORELC, Jože. Determination of damage material
properties for the calculation of large rolling bearing carrying capacity. V: VILLACAMPA
ESTEVE, Y. (ur.), CARLOMAGNO, Giovanni M. (ur.), BREBBIA, Carlos A. (ur.).
Computational methods and experimental measurements X. 10th International Conference on Computational Methods and Experimental Measurements
CMEM X, Alicante, Spain, June 4-6, 2001. Southampton; Boston: WIT Press, cop. 2001.
Str. 321-331. Computational Engineering, vol. 3. ISBN 1-85312-870-8. ISSN 1369-734X.
[COBISS.SI-ID
4695835]
91.
KORELC, Jože. Hybrid system for multi-language and multi-environment generation of
numerical codes. V: MOURRAIN, Bernard (ur.).
ISSAC 2001 : proceedings of the 2001 International symposium on symbolic and algebraic
computation. ISSAC 2001, July 22-25, 2001, University of Western Ontario, London, Ontario, Canada.
New York: The Association for Computing Machinery, 2001. Str. 209-216, ilustr. ISBN
1-58113-417-7. [COBISS.SI-ID
1375329]
92.
KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter, KORELC, Jože, et al. Rolling contact simulations
with frictional contact elements using Lagrangian description. V: MEIER, Gerd Emil
Alexander (ur.).
Short communications in mathematics and mechanics, section 1-8, Annual Meeting, University
of Göttingen, Germany, April 2-7, 2000. Berlin: Wiley-VCH, 2001. Str. 397-398, ilustr. Zeitschrift für Angewandte Mathematik
und Mechanik, Vol. 81, suppl. 2. ISSN 0946-8463. [COBISS.SI-ID
1379169]
93.
ŠUŠTAR, Tomaž, KORELC, Jože, RODIČ, Tomaž. Reševanje sklopljenega magnetnega in temperaturnega
polja = Solution of coupled magneto-thermal field. V: ŠKERGET, Leopold (ur.).
Zbornik del. Kuhljevi dnevi '01, Portorož, 27.-28. september 2001. Ljubljana: Slovensko društvo
za mehaniko, 2001. Str. 153-160, graf. prikazi. ISBN 86-435-0424-6. [COBISS.SI-ID
1395809]
94.
KUNC, Robert, PREBIL, Ivan, RODIČ, Tomaž, KORELC, Jože. Malociklične elasto-plastične
lastnosti materiala 42CrMo4 = [Low-cycle elasto-plastic properties of the steel 42CrMo4].
V: TRENC, Ferdinand (ur.), FAJDIGA, Matija (ur.), NAGODE, Marko (ur.).
Zbornik referatov. 5. konferenca IAT'01, Ljubljana, Slovenija, 5.-6. april 2001. Ljubljana: Zveza strojnih
inženirjev in tehnikov Slovenije, SVM: Fakulteta za strojništvo, LAVEK, 2001. Str.
41-48 (iat01 1b05). IAT, Inovativna avtomobilska tehnologija. ISBN 961-6238-48-5.
ISSN 1408-1679. [COBISS.SI-ID
4314651]
95.
KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter, KORELC, Jože. Symbolically generated 3D
smooth polynomial frictional contact element based on the quartic Bézier surfaces.
V:
ECCOMAS 2000. [CD-Rom proceedings]. 3rd European Congress on Computational Methods in Applied Sciences and Engineering,
Barcelona, Spain, September 11-14, 2000. Barcelona: CIMNE, 2000. Str. [1-19], graf.
prikazi. ISBN 84-89925-70-4. [COBISS.SI-ID
1064545]
96.
KORELC, Jože, KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter. Tridimenzionalni kontaktni
element z uporabo Bézierovih ploskev četrtega reda. V: ŠKERGET, Leopold (ur.).
Zbornik del. Kuhljevi dnevi 2000, Maribor, 21.-22. september 2000. Ljubljana: Slovensko društvo
za mehaniko, 2000. Str. 215-222, graf. prikazi. ISBN 86-435-0348-7. [COBISS.SI-ID
1065825]
97.
JELOVŠEK, Damjan, RODIČ, Tomaž, GREŠOVNIK, Igor, KORELC, Jože, DUTKO, Martin. Optimiranje
preoblikovalnih procesov z uporabo gradientnih metod. V: ŠKERGET, Leopold (ur.).
Zbornik del. Kuhljevi dnevi 2000, Maribor, 21.-22. september 2000. Ljubljana: Slovensko društvo
za mehaniko, 2000. Str. 231-238, graf. prikazi. ISBN 86-435-0348-7. [COBISS.SI-ID
1066337]
98.
RODIČ, Tomaž, GREŠOVNIK, Igor, JELOVŠEK, Damjan, KORELC, Jože. Optimisation of prestressing
of a cold forging die by using symbolic templates. V:
ECCM '99 : European conference on computational mechanics, August 31 - september 3,
Munich, Germany : proceedings of the European conference on computational mechanics
1999. München: Technische Universität München, 1999. Str. 362-372. [COBISS.SI-ID
157535]
99.
WRIGGERS, Peter, KRSTULOVIĆ-OPARA, Lovre, KORELC, Jože. Development of 2D smooth polynomial
frictional contact elements based on a symbolic approach. V: WUNDERLICH, W. (ur.).
Solids, structures, and coupled problems in engineering : proceedings of the European
Conference on Computational Mechanics 1999. München: TU, Lehrstuhl für Statik, 1999. Str. [1-16], graf. prikazi. [COBISS.SI-ID
836961]
100.
STUPKIEWICZ, Stanisław, DUTKO, Martin, KORELC, Jože. Sensitivity analysis for 2-D
frictional contact problems. V: WUNDERLICH, W. (ur.).
Solids, structures, and coupled problems in engineering : proceedings of the European
Conference on Computational Mechanics 1999. München: TU, Lehrstuhl für Statik, 1999. Str. [1-19], ilustr. [COBISS.SI-ID
836705]
101.
KORELC, Jože, KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter. Razvoj C1 zveznih kontaktnih
elementov = Development of 2D contact elements with C1 continuity. V: ŠTOK, Boris
(ur.).
Zbornik del. Kuhljevi dnevi '99, Zemono, 30. september-1. oktober 1999. Ljubljana: Slovensko
društvo za mehaniko, 1999. Str. 127-134, graf. prikazi. ISBN 961-90000-7-2. [COBISS.SI-ID
837217]
102.
KORELC, Jože, WRIGGERS, Peter. Symbolic derivation of finite element code for a general
mixed Galerkin-collocation methods. V: IDELSOHN, Sergio R. (ur.), OÑATE, Eugenio (ur.),
DVORKIN, Eduardo N. (ur.).
Computational mechanics : new trends and applications. Barcelona: Centro Internacional de Métodos Numéricos en Ingeniería, 1998. Str. 1-10,
graf. prikazi. ISBN 84-89925-15-1. [COBISS.SI-ID
658017]
103.
KORELC, Jože. Splošen simboličen opis Galerkin-kolokacijskih metod = Symbolic description
of mixed Galerkin-collocation methods. V: ŠTOK, Boris (ur.).
Zbornik del. Kuhljevi dnevi '98, Logarska dolina, Slovenija, 1.-2. oktober 1998. Ljubljana: Slovensko
društvo za mehaniko, 1998. Str. 97-140, graf. prikazi. ISBN 961-90000-6-4. [COBISS.SI-ID
657761]
104.
RODIČ, Tomaž, GREŠOVNIK, Igor, PRISTOVŠEK, Anton, KORELC, Jože. Optimiranje prednapetja
orodij za preoblikovanje v hladnem = Optimal prestressing of dies for cold forming
operations. V: ŠTOK, Boris (ur.).
Zbornik del. Kuhljevi dnevi '98, Logarska dolina, Slovenija, 1.-2. oktober 1998. Ljubljana: Slovensko
društvo za mehaniko, 1998. Str. 145-151. ISBN 961-90000-6-4. [COBISS.SI-ID
2840347]
105.
KORELC, Jože. A symbolic system for cooperative problem solving in computational mechanics.
V: OWEN, D... R... J... (ur.).
Computational plasticity : fundamentals and applications : proceedings of the Fifth
international conference on computational plasticity held in Barcelona, Spain, 17th-20th
March 1997. 1st ed. Barcelona: International center for numerical methods in Engineering (CIMNE),
1997. Str. 451-456. ISBN 84-87867-71-5, ISBN 84-87867-87-1, ISBN 84-87867-88-X. [COBISS.SI-ID
146529]
106.
KORELC, Jože. Razvoj metode "Enhanced Strain" končnih elementov = Development of enhanced
strain finite element method. V: ŠTOK, Boris (ur.).
Zbornik del. Kuhljevi dnevi '97, Mokrice, 25.-26. september 1997. Ljubljana: Slovensko društvo
za mehaniko, 1997. Str. 41-48, graf. prikazi. ISBN 961-90000-5-6. [COBISS.SI-ID
657505]
107.
KORELC, Jože. Symbolic algebra approach for high abstract description of nonlinear
finite elements. V: CARRIÉRE, Alain (ur.), OUDIN, Louis Remi (ur.).
5th Rhine workshop on computer algebra : 1-3. 04. 1996 Saint - Louis. 1st ed. Saint Louis: Institut Franco-Allemand de recherches de Saint Louis, 1996.
Str. 16.1-16.11. [COBISS.SI-ID
148833]
108.
KORELC, Jože. Uporaba simboličnih algebraičnih sistemov v nelinearnih mehaniki. V:
OBLAK, Maks (ur.).
Zbornik del : Kuhljevi dnevi '95. Kuhljevi dnevi '95, Radenci, 21. - 22. september 1995. V Ljubljani: Slovensko društvo
za mehaniko, 1995. Str. 279-294, graf. prikazi. ISBN 961-90000-3-X. [COBISS.SI-ID
144737]
109.
KORELC, Jože, . Uporaba računalniških algebraičnih sistemov v analizi konstrukcij.
V: DUHOVNIK, Janez (ur.).
Računalnik v gradbenem inženirstvu : zbornik 7. seminarja, Ljubljana, april 1994. Ljubljana: Fakulteta za arhitekturo, gradbeništvo in geodezijo, Oddelek za gradbeništvo
in geodezijo, Inštitut za konstrukcije, potresno inženirstvo in računalništvo, 1994.
Str. 21-28, graf. prikazi. ISBN 86-80223-32-8. [COBISS.SI-ID
144481]
110.
SAJE, Miran, KORELC, Jože. Brahistokrona. V: OBLAK, Maks (ur.).
Zbornik del. Kuhljevi dnevi '92, Portorož, 24.-25. september 1992. Ljubljana: Slovensko društvo
za mehaniko, 1992. Str. 1-8, graf. prikazi. ISBN 961-90000-0-5. [COBISS.SI-ID
441953]
1.09 Objavljeni strokovni prispevek na konferenci
111.
BANOVEC, Jurij, KORELC, Jože. Račun razpok armiranobetonskih konstrukcij s programom
NONFRAN. V: PERIŠIĆ, Života (ur.).
Teorijska i eksperimentalna istraživanja ; Računari u konstrukterstvu, i Opšta razmatranja.
Knj. T 1, T-1 - T-50. Beograd: Savez društava građevinskih konstruktera Jugoslavije, 1991. Str. 1-6, graf.
prikazi. [COBISS.SI-ID
656993]
112.
BANOVEC, Jure, KORELC, Jože. PONO - grafični poprocesor za prikaz rezultatov programa
NONFRAN = PONO - postprocessor for graphic display of the NONFRAN program results.
V: DUHOVNIK, Janez (ur.).
Računalnik v gradbenem inženirstvu : zbornik 5. seminarja, Ljubljana, april 1990. Ljubljana: Fakulteta za arhitekturo, gradbeništvo in geodezijo, VTOZD GG, Inštitut
za konstrukcije, potresno inženirstvo in računalništvo, 1990. Str. 250-255, ilustr.
ISBN 86-80223-11-5. [COBISS.SI-ID
72893440]
113.
BANOVEC, Jurij, KORELC, Jože. TORO - program za pripravo podatkov za nelinearno analizo
ravninskih okvirov s programom NONFRAN z upoštevanjem tečenja betona. V: PERIŠIĆ,
Života (ur.).
Simpozijum 89, Dubrovnik, 25-27 april 1989. Knj. R, Računari : primena u građevinskom
konstrukterstvu. Beograd: Savez građevinskih konstruktera Jugoslavije, 1989. Str. 7-12, graf. prikazi.
[COBISS.SI-ID
656737]
114.
BANOVEC, Jure, BEG, Darko, KORELC, Jože. PAKON - paket za analizo konstrukcij z NONFRAN-om.
V: FISCHINGER, Matej (ur.), KRŽIČ, Franci (ur.), SAJE, Franc (ur.).
Zbornik 11. zborovanja gradbenih konstruktorjev Slovenije, Bled, 19.- 20. oktobra
1989. [Ljubljana: Društvo gradbenih konstruktorjev: Društvo za potresno inženirstvo, 1989].
Str. 29-36, ilustr. [COBISS.SI-ID
76111872]
1.10 Objavljeni povzetek znanstvenega prispevka na konferenci (vabljeno predavanje)
115.
KORELC, Jože. Sensitivity analysis based computational modeling. V:
CMM-SolMech 2022 : 24th International Conference on Computer Methods in Mechanics
(CMM) [and] 42nd Solid Mechanics Conference (SolMech) : September 5-8, 2022, Świnoujście
(Poland). [Szczecin]: Institute of Fundamental Technological Research, Polish Academy of Sciences:
West Pomeranian University of Technology in Szczecin, 2022. 1 spletni vir.
http://cmm-solmech.ippt.pan.pl/PLabstracts.html#PL_3. [COBISS.SI-ID
150123523]
116.
KORELC, Jože. Symbolic Formulation and Automatic Derivation of Nonlinear Finite Elements
Models. V:
CSEI2012 : 1a Conferência Nacional sobre Computação Simbólica no Ensino e na Investigação,
Instituto Superior Técnico, Lisboa, 2 - 2 de April 2012 : Programa, Resumos des Comunicações. Lisboa: Instituto Superior Técnico, 2012. Str. 15-16, ilustr. [COBISS.SI-ID
5961825]
117.
KORELC, Jože. Efficiency and limitations of automation of computational modeling.
V:
ECCOMAS 2012 CD-ROM Proceedings : Proceedings of the 6th European Congress on Computational
Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012,
Vienna, Austria. 6th European Congress on Computational Methods in Applied Sciences and Engineering
(ECCOMAS 2012), September 10-14, 2012, Vienna, Austria. Vienna: University of Technology,
2012. Str. 239. ISBN 978-3-9502481-9-7. [COBISS.SI-ID
5971041]
118.
KORELC, Jože, STUPKIEWICZ, Stanislaw, LENGIEWICZ, Jakub. Automation of finite element
formulations for contact problems. V:
ICCCM 2011 : 2nd International Conference on Computational Contact Mechanics, 15 -
17 June 2011 Archland Building - Leibniz Unibersität Hannover, Hannover, Germany :
Program and Abstracts. Hannover: Leibniz Unibersität Hannover, 2011. Str. 25-26, ilustr. [COBISS.SI-ID
5955681]
119.
KORELC, Jože. Automation of computational modeling by automatic differentiation. V:
ECCM 2010. IV European Conference on Computational Mechanics [also] ECCM 2010, Palais des Congrès,
Paris, France, May 16-21, 2010. Paris: Computational Structural Mechanics Association,
2010, cop. 2008. Str. 1-2. [COBISS.SI-ID
5143649]
1.12 Objavljeni povzetek znanstvenega prispevka na konferenci
120.
ZUPAN, Nina, KORELC, Jože. Sensitivity Analysis Based Multi-Scale Optimisation. V:
OÑATE, Eugenio (ur.).
Computational Plasticity XV : XV International Conference on Computational Plasticity.
Fundamentals and Applications, 3 - 5 September 2019, Barcelona, Spain. XV International Conference on Computational Plasticity. Fundamentals and Applications,
3 - 5 September 2019, Barcelona, Spain. Barcelona: International Center for Numerical
Methods in Engineering (CIMNE), 2019. Str. 1, ilustr.
https://congress.cimne.com/complas2019/admin/files/fileabstract/a191.pdf. [COBISS.SI-ID
8899937]
121.
KORELC, Jože, ZUPAN, Nina. Sensitivity analysis based multi-scale methods of coupled
path-dependent problems. V: TERZE, Zdravko (ur.).
International ECCOMAS Thematic Conference on Computational Modeling of Complex Materials
across the Scales (CMCS 2019), 1-4 Oktober 2019, Glasgow : [Abstracts]. [Glasgow: University of Glasgow], 2018. Str. 63. [COBISS.SI-ID
150764035]
122.
KORELC, Jože, MELINK, Teja. Fast second order sensitivity analysis of large-scale
elasto-plastic models. V: MAROVIĆ, Pavao (ur.), KRSTULOVIĆ-OPARA, Lovre (ur.), GALIĆ,
Mirela (ur.).
Book of Abstracts. 9th International Congress of Croatian Society of Mechanics, Split, Croatia, September
18-22, 2018. Zagreb: Croatian Society of Mechanics, cop. 2018. Str. 60. Book of abstracts
(International Congress of Croatian Society of Mechanics). ISSN 2584-7716. [COBISS.SI-ID
8607329]
123.
MELINK, Teja, KORELC, Jože. Automation of stochastic finite element method. V:
ECCOMAS 2012 : Book of Abstracts : Proceedings of the 6th European Congress on Computational
Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012,
Vienna, Austria. Vienna: University of Technology, 2012. Str. 275. [COBISS.SI-ID
5970785]
124.
HIRSCHBERGER, Claudia Britta, CLASEN, Heiko, KORELC, Jože, WRIGGERS, Peter. Automation
of computational Homogenization: Consisted Macro Linearization for Dissipative Microstructures.
V:
TCCM 2011 : Trends & Challenges in Computational Mechanics, 12 - 14 September 2011,
Anula E, Palazzo del Bò, Universitià di Padova, Padua, Italy : A Conference in Honor
of Peter Wriggers' 60th Birthday : Program and Abstracts. Padova: Universitià di Padova, 2011. Str. 53-54, ilustr. ISBN 978-88-96477-22-9.
[COBISS.SI-ID
5956961]
125.
ŠOLINC, Urša, KORELC, Jože, WRIGGERS, Peter. An improved EAS brick element for finite
deformation. V:
ECCM 2010. IV European Conference on Computational Mechanics [also] ECCM 2010, Palais des Congrès,
Paris, France, May 16-21, 2010. Paris: Computational Structural Mechanics Association,
2010, cop. 2008. Str. 1. [COBISS.SI-ID
5143393]
126.
MELINK, Teja, KORELC, Jože. Stability of Stochastic Finite Elements. V:
ECCM 2010. IV European Conference on Computational Mechanics [also] ECCM 2010, Palais des Congrès,
Paris, France, May 16-21, 2010. Paris: Computational Structural Mechanics Association,
2010, cop. 2008. Str. 1-2, ilustr. [COBISS.SI-ID
5952097]
127.
KORELC, Jože. Automation of Stability Analysis Procedures. V: KHALILI, Naser (ur.).
Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific
Congress on Computational Mechanics : Abstracts : WCCM/APCOM 2010, 19.-23. July, Sydney,
Australia. Sydney: [S.n.], 2010. Str. 1-2. [COBISS.SI-ID
5100129]
128.
KORELC, Jože, MELINK, Teja, GAMS, Matija. Finite element engineering applications
based on FEMplayer Mathematica player pro : [abstract]. V:
International Mathematica Use Conference 2009 : October 22-24, Champaign, Illinois. S. l.: s. n., 2009. Str. 12. [COBISS.SI-ID
4798049]
129.
KORELC, Jože, MELINK, Teja. Automation of stochastic finite element method by symbolic-numeric
approach. V: SCHREFLER, Bernhard (ur.), PEREGO, Umberto (ur.).
8th World Congress on Computational Mechanics WCCM8 [and] 5th European Congress on
Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, Venice, Italy,
30 June-4 July 2008. Barcelona: CIMNE - International Center for Numerical Methods in Engineering, cop.
2008. Str. 1. [COBISS.SI-ID
4872801]
130.
KORELC, Jože, KRISTANIČ, Niko. Direct determination of initial imperfections : the
most unfavourable and most favourable initial shape. V: SCHREFLER, Bernhard (ur.),
PEREGO, Umberto (ur.).
8th World Congress on Computational Mechanics WCCM8 [and] 5th European Congress on
Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, Venice, Italy,
30 June-4 July 2008. Barcelona: CIMNE - International Center for Numerical Methods in Engineering, cop.
2008. Str. 1. [COBISS.SI-ID
4873057]
131.
KORELC, Jože. Large-scale finite element simulations withAceFEM : [abstract]. V:
International Mathematica User Conference 2008 : October 23-25, Champaign, Illinois. S. l.: s. n., 2008. Str. 23. [COBISS.SI-ID
4872545]
132.
KORELC, Jože. On-demand numerical code generation and finite element analysis with
Mathematica. V:
Berliner Mathematica-Tag : 16. November 2007. S.l.: s.n., 2007. Str. 1. [COBISS.SI-ID
4887393]
133.
KORELC, Jože. On-demand numerical code generation and finite element analysis. V:
USNCCM IX. 9th US National Congress on Computational Mechanics, San Francisco, July 22-26,
2007. [Berkeley: University of California], 2007. Str. 89. [COBISS.SI-ID
4874337]
134.
KORELC, Jože, KRISTANIČ, Niko. Efficient environment for gradient based shape optimisation
of structures. V:
WCCM VII. 7th World Congress on Computational Mechanics, Los Angeles, California, USA, July
16.-22., 2006. [S.l.]: International Association for Computational Mechanics, 2006.
Str. 1. [COBISS.SI-ID
3771489]
135.
KORELC, Jože. Volume and symmetry preserving finite strain plasticity formulation.
V:
WCCM VII. 7th World Congress on Computational Mechanics, Los Angeles, California, USA, July
16.-22., 2006. [S.l.]: International Association for Computational Mechanics, 2006.
Str. 1. [COBISS.SI-ID
3771745]
136.
LENGIEWITCZ, Jakub, STUPKIEWIZS, S..., KORELC, Jože, RODIČ, Tomaž. DDM-based sensitivity
analysis and optimization for smooth contact formulations. V:
Abstracts. 4th Contact Mechanics International Symposium, Hannover, July 4-6, 2005. Hannover
Universität: ICCES, International Center for Computational Engineering Sciences, 2005.
Str. 23. ECCOMAS Thematic Conference. [COBISS.SI-ID
2997089]
137.
KORELC, Jože, LENGIEWITCZ, Jakub, STUPKIEWIZS, S... A study of symbolic description,
numerical efficiency and accuracy of 2D and 3D contact formulations. V:
Abstracts. 4th Contact Mechanics International Symposium, Hannover, July 4-6, 2005. Hannover
Universität: ICCES, International Center for Computational Engineering Sciences, 2005.
Str. 57. ECCOMAS Thematic Conference. [COBISS.SI-ID
2996833]
138.
RODIČ, Tomaž, KORELC, Jože, STUPKIEWIZS, S..., LENGIEWITCZ, Jakub, DUTKO, M..., ŠUŠTAR,
Tomaž, GREŠOVNIK, Igor, PRISTOVŠEK, Anton, ŠUŠTARIČ, Primož, CUKJATI, Domen, HARTMAN,
Stanislav. Multi-scale and multi-physics analysis of material forming procrsses. V:
KUZMAN, Karl (ur.).
Conference proceedings. 5th International Conference on Industrial Tools, ICIT 2005, Velenje, April 12th
- 15th 2005. Celje: TECOS, Slovenian Tool and Die Development Centre, 2005. Str. 327-330.
ISBN 961-90401-9-8. [COBISS.SI-ID
559967]
139.
BRANK, Boštjan, KORELC, Jože, BOHINC, Uroš. Automatic generation of nonlinear 3D-shell
finite element code by symbolic manipulations. V: YAO, Zhenhan (ur.).
Computational mechanics. Abstracts : abstracts of the papers presented at the regular
sessions of the sixth world congress on computational mechanics in conjunction with
the second Asian-Pacific congress on computational mechanics, September 5-10, 2004,
Beijing, China. Sixth World congress on computational mechanics, September 5-10, 2004, Beijing.
Beijing: Tsinghua University Press; Berlin ... [etc.]: Springer, 2004. Str. 159. ISBN
7-302-09341-5, ISBN 7-302-09342-3. [COBISS.SI-ID
2465633]
140.
KORELC, Jože, SKUBER, Peter, BEG, Darko. Derivation of Finite Strain Damage Model
for Simulation of Low-Cycle Fatigue of Steel Structures. V: YAO, Zhenhan (ur.).
Computational mechanics. Abstracts : abstracts of the papers presented at the regular
sessions of the sixth world congress on computational mechanics in conjunction with
the second Asian-Pacific congress on computational mechanics, September 5-10, 2004,
Beijing, China. Sixth World congress on computational mechanics, September 5-10, 2004, Beijing.
Beijing: Tsinghua University Press; Berlin ... [etc.]: Springer, 2004. Str. 264. ISBN
7-302-09341-5, ISBN 7-302-09342-3. [COBISS.SI-ID
2653281]
141.
KORELC, Jože. Automatic derivation of complex material models. V:
CD-ROM Conference proceedings. 7th U.S. national congress on computational mechanics, July 27-July 31, 2003, Albuquerque,
New Mexico. [S.l.: U.S. Association for Computational Mechanics: = USACM], 2003. Str.
-575. ISBN 0-9743254-0-6. [COBISS.SI-ID
2150497]
142.
ŠUŠTAR, Tomaž, KORELC, Jože, RODIČ, Tomaž. Fully coupled electromagnetic, thermal
and mechanical analysis of dieless forming controlled by inductive heating. V:
Book of abstracts. Fifth World congress on computational mechanics, July 7-12, 2002, Vienna, Austria.
Vienna: University of Technology, 2002. Str. i-556. ISBN 3-9501554-1-4, ISBN 3-9501554-2-2.
[COBISS.SI-ID
1736801]
143.
STADLER, Michael, HOLZAPFEL, Gerhard A., KORELC, Jože. NURBS - based smooth surface
contact for the numerical simulation of balloon angioplasty. V:
Book of abstracts. Fifth World congress on computational mechanics, July 7-12, 2002, Vienna, Austria.
Vienna: University of Technology, 2002. Str. ii-626. ISBN 3-9501554-1-4, ISBN 3-9501554-2-2.
[COBISS.SI-ID
1737825]
144.
KORELC, Jože. Shape and parameter sensitivity analysis of stability points. V:
Book of abstracts. Fifth World congress on computational mechanics, July 7-12, 2002, Vienna, Austria.
Vienna: University of Technology, 2002. Str. ii-370. ISBN 3-9501554-1-4, ISBN 3-9501554-2-2.
[COBISS.SI-ID
1737057]
145.
BRANK, Boštjan, KORELC, Jože, IBRAHIMBEGOVIĆ, Adnan. Shell formulations with through-the-thickness
stretching. V:
Book of abstracts. Fifth World congress on computational mechanics, July 7-12, 2002, Vienna, Austria.
Vienna: University of Technology, 2002. Str. 222. ISBN 3-9501554-1-4, ISBN 3-9501554-2-2.
[COBISS.SI-ID
1679457]
146.
KORELC, Jože, SAJE, Miran. Direct computation of limit and bifurcation points based
on backward differentiation of Crout's elimination. V: HULBERT, Gregory M. (ur.).
Abstracts. 6th US National Congress on Computational Mechanics USACM VI, August 1-3, 2001,
Dearborn, Michigan. [S.l.: U.S. Association for Computational Mechanics], 2001. Str.
589. [COBISS.SI-ID
1375073]
147.
KORELC, Jože. Hybrid system for multi-language and multi-environment generation of
numerical codes. V: HULBERT, Gregory M. (ur.).
Abstracts. 6th US National Congress on Computational Mechanics USACM VI, August 1-3, 2001,
Dearborn, Michigan. [S.l.: U.S. Association for Computational Mechanics], 2001. Str.
123. [COBISS.SI-ID
1374561]
148.
ŠUŠTAR, Tomaž, KORELC, Jože, RODIČ, Tomaž. Solution of fully coupled magnetic-thermomechanical
problem. V: HULBERT, Gregory M. (ur.).
Abstracts. 6th US National Congress on Computational Mechanics USACM VI, August 1-3, 2001,
Dearborn, Michigan. [S.l.: U.S. Association for Computational Mechanics], 2001. Str.
526. [COBISS.SI-ID
1374817]
149.
KORELC, Jože. Multi-language approach in automatic generation of numerical procedures.
V: MEIER, Gerd E. A. (ur.), ECKELMANN, Helmut (ur.), KRESS, Reiner (ur.).
Book of abstracts of the Annual Scientific Conference GAMM 2000 at the University
of Göttingen, 2-7 April 2000. Göttingen: [GAMM2000, Sekretariat], 2000. Str. 77. [COBISS.SI-ID
1000801]
150.
KRSTULOVIĆ-OPARA, Lovre, WRIGGERS, Peter, KORELC, Jože. Rolling contact simulations
with frictional contact elements using Lagrangian description. V: MEIER, Gerd E. A.
(ur.), ECKELMANN, Helmut (ur.), KRESS, Reiner (ur.).
Book of abstracts of the Annual Scientific Conference GAMM 2000 at the University
of Göttingen, 2-7 April 2000. Göttingen: [GAMM2000, Sekretariat], 2000. Str. 80. [COBISS.SI-ID
1001057]
151.
STUPKIEWICZ, Stanislaw, RODIČ, Tomaž, GREŠOVNIK, Igor, DUTKO, Martin, KORELC, Jože,
WHELAN, Maurice. Optimisation and inverse problems involving frictional contact. V:
POTIER-FERRY, Michel (ur.), TOTH, Laszlo S. (ur.).
Book of abstracts. 4th EUROMECH Solid Mechanics Conference, Metz, France, June 26-30, 2000. Metz: Euromech,
2000. Str. 540. [COBISS.SI-ID
1064801]
152.
KUNC, Robert, KORELC, Jože, PREBIL, Ivan, TORKAR, Matjaž. Določevanje materialnih
parametrov za računanje nosilnosti velikih kotalnih ležajev z mehaniko poškodbe =
Determination of material properties for the calculation of large rolling bearing
carrying capacity using damage mechanics. V:
[Program in knjiga povzetkov] = [Program and book of abstracts]. 8. Konferenca o materialih in tehnologijah, 10.-12. oktober 2000, Portorož, Slovenija.
[Ljubljana: Inštitut za kovinske materiale in tehnologije, 2000]. Str. 135. [COBISS.SI-ID
4016411]
153.
KORELC, Jože. Automatic derivation of sensitivity terms for mixed Galerkin-collocation
problems. V:
Book of abstracts of the Annual Scientific Conference GAMM 99, Metz, 12 - 16 April
1999. Metz: Université, 1999. Str. 88. GAMM, suppl. ZAMM. ISSN 0946-8463. [COBISS.SI-ID
658529]
154.
GREŠOVNIK, Igor, KORELC, Jože, RODIČ, Tomaž, ŠUŠTAR, Tomaž. An approach to more efficient
development of computational systems for solution of inverse and optimisation problems
in material forming. V:
SciTools'98 : book of abstracts. International Workshop on Modern Software Tools for Scientific Computing, Oslo,
Norway, September 14-16, 1998. Oslo: SINTEF Applied Mathematics, 1998. Str. 31. [COBISS.SI-ID
98399]
155.
KORELC, Jože. A mathematica package for cooperative problem solving in computational
: abstract. V:
The 2nd IMACS conference on application of computer algebra : Castle Hagenberg (Austrija)
17 - 20 July, 1996 : abstract. [S. l.]: Research Insitute for Symbolic Computation, 1996. Str. 127. [COBISS.SI-ID
148321]
156.
KORELC, Jože. Automation generation of object oriented programs for solving nonlinear
mechanical problems. V:
Zusammenfassungen auf der wissenschaftlichen Jahrestagung an der Technischen Universität
Braunschweig vom 4.-8.April 1994 gehaltenen Vorträge = Abstracts of the lectures presented
at the Annual Scientific Conference at the Tecnical University of Braunschweig from
April 4th to April 8th 1994. Braunschweig: Gesellschaft für Angewandte Mathematik und Mechanik, 1994. Str. 171.
[COBISS.SI-ID
149857]
1.16 Samostojni znanstveni sestavek ali poglavje v monografski publikaciji
157.
MELINK, Teja, KORELC, Jože. Sensitivity analysis based automation of computational
problems. V: SCHRÖDER, Jörg (ur.), PIMENTA, Paulo de Mattos (ur.).
Novel Finite Element Technologies for Solids and Structures. Cham: Springer, 2020. Str. 41-67, ilustr. CISM International Centre for Mechanical
Sciences Ser., v. 597. ISBN 9783030335205, ISBN 3030335208, ISBN 9783030335212, ISBN
3030335216, ISBN 9783030335229, ISBN 3030335224. DOI:
10.1007/978-3-030-33520-5. [COBISS.SI-ID
25201155]
158.
WRIGGERS, Peter, HUDOBIVNIK, Blaž, KORELC, Jože. Efficient low order virtual elements
for anisotropic materials at finite strains. V: OÑATE, Eugenio (ur.).
Advances in computational plasticity : a book in honour of D. Roger J. Owen. Cham: Springer, 2018. Str. 417-434, ilustr. Computational methods in applied sciences,
46. ISBN 978-3-319-60885-3. ISSN 1871-3033.
https://link.springer.com/chapter/10.1007/978-3-319-60885-3_20, DOI:
10.1007/978-3-319-60885-3_20. [COBISS.SI-ID
147832067]
159.
ZUPAN, Nina, KORELC, Jože. Unified approach to sensitivity analysis based automation
of multiscale modelling. V: SORIĆ, Jurica (ur.), WRIGGERS, Peter (ur.), ALLIX, Olivier
(ur.).
Multiscale modeling of heterogeneous structures. Berlin: Springer International Publishing AG, cop. 2018. Str. 113-127, ilustr. Lecture
notes in applied and computational mechanics, Vol. 86. ISBN 978-3-319-65462-1, ISBN
978-3-319-65463-8. ISSN 1613-7736. [COBISS.SI-ID
8313185]
160.
KORELC, Jože. Automatic Differentiation Based Formulation of Computational Models.
V: MUELLER-HOEPPE, Dana (ur.), LOEHNERT, Stefan (ur.), REESE, Stefanie (ur.).
Recent developments and innovative applications in computational mechanics. Berlin [etc.]: Springer, 2011. Str. 79-86. ISBN 978-3-642-17483-4, ISBN 3-642-17483-3.
DOI:
10.1007/978-3-642-17484-1_10. [COBISS.SI-ID
5958241]
161.
KORELC, Jože. Automation of the finite element method. V: WRIGGERS, Peter.
Nonlinear finite element methods. Berlin [etc.]: Springer, 2008. Str. 483-508. ISBN 978-3-540-71000-4, ISBN 3-540-71000-0.
[COBISS.SI-ID
4294241]
162.
KORELC, Jože. Symbolic approach in computational mechanics of solids. V: FISCHINGER,
Matej (ur.).
Faculty of Civil and Geodetic Engineering on the doorstep of the millennium : on the
occasion of its 80th anniversary. Ljubljana: Faculty of Civil and Geodetic Engineering, 2000. Str. 1-16, graf. prikazi.
ISBN 961-6167-33-2. [COBISS.SI-ID
965473]
163.
RODIČ, Tomaž, GREŠOVNIK, Igor, KORELC, Jože. Symbolic computations applied to constitutive
modelling of direct and inverse forming problems. Project SI 1. V: RAPPAZ, Michel
(ur.), LOBOTKA, Peter (ur.).
Cost 512. Modelling in materials science and processing : final report. Brussels: European Commission, COST Secretariat, 1998. Str. 109-114. [COBISS.SI-ID
98911]
164.
KORELC, Jože, WRIGGERS, Peter. Efficient enhanced strain element formulation for 2D
and 3D problems. V: WIBERG, Nils - Erik (ur.).
Advances in finite element technology. Str. 22-46. Theory and engineering applications of computational methods, 2. ISBN
84-87867-63-4. [COBISS.SI-ID
146273]
1.22 Intervju
165.
KORELC, Jože (intervjuvanec). Intervju prof. dr. Jože Korelc.
Most : glasilo študentov Fakultete za gradbeništvo in geodezijo v Ljubljani. dec. 2010, str. 4-5, ilustr. ISSN 2630-2799. [COBISS.SI-ID
5968993]
1.25 Drugi sestavni deli
166.
KORELC, Jože. In memoriam prof. dr. Darko Beg, univ. dipl. inž. grad., 1954-2014.
Gradbeni vestnik : glasilo Zveze društev gradbenih inženirjev in tehnikov Slovenije. [Tiskana izd.]. mar. 2014, letn. 63, str. 50-51, portret. ISSN 0017-2774.
http://www.dlib.si/details/URN:NBN:SI:DOC-3L8SUBIM. [COBISS.SI-ID
6546273]
MONOGRAFIJE IN DRUGA ZAKLJUČENA DELA
2.01 Znanstvena monografija
2.05 Drugo učno gradivo
168.
KORELC, Jože.
Automation of Computational Modeling : with introduction to AceGen and AceFEM. Ljubljana: University of Ljubljana, Faculty of Civil and Geodetic Engineering, 2010.
459 str., ilustr. [COBISS.SI-ID
5008225]
169.
KORELC, Jože.
Stabilnost konstrukcij : skripta. Ljubljana: Fakulteta za gradbeništvo in geodezijo, 2010. 1 zv. (loč. pag.), ilustr.
[COBISS.SI-ID
5007969]
170.
KORELC, Jože.
Finite element library for education and research. Ljubljana: University of Ljubljana, Faculty of civil and geodetic engineering, 2002.
1 optični disk (1 CD-ROM). [COBISS.SI-ID
1744993]
2.08 Doktorska disertacija
171.
KORELC, Jože.
Symbolic approach in computational mechanics and its application to the enhanced strain
method. Darmstadt: [J. Korelc], 1996. 134 str., ilustr. [COBISS.SI-ID
65072128]
2.09 Magistrsko delo
172.
KORELC, Jože.
Nelinearna statična analiza ploskovnih konstrukcij z metodo končnih elementov : magistrska
naloga. Ljubljana: [J. Korelc], 1993. 78 f.,23 pril., graf. prikazi. [COBISS.SI-ID
145505]
2.11 Diplomsko delo
173.
KORELC, Jože.
PAKON - sistem za statično analizo konstrukcij : diplomska naloga. Ljubljana: [J. Korelc], 1990. 101 f., pril., graf. prikazi. [COBISS.SI-ID
2790497]
2.12 Končno poročilo o rezultatih raziskav
174.
BEG, Darko, BANOVEC, Jurij, KORELC, Jože, REMEC, Črtomir, MUR, Roman, HLADNIK, Leon.
Analiza potresne varnosti jeklenih konstrukcij v Sloveniji : letno poročilo o rezultatih
raziskovalnega projekta za leto 1999. Ljubljana: UL, Fakulteta za gradbeništvo in geodezijo, 2000. [4] str., pril. [COBISS.SI-ID
1187937]
175.
BEG, Darko, BANOVEC, Jurij, KRAJNC, Aleš, KORELC, Jože.
Integrirano optimiranje konstrukcijskih sistemov : letno poročilo o rezultatih raziskovalnega
projekta. Ljubljana: UL, Fakulteta za gradbeništvo in geodezijo, 2000. [4] str., pril. [COBISS.SI-ID
1187681]
176.
KORELC, Jože, WRIGGERS, Peter.
Improved enhanced strain four node element with Taylor expansion of shape functions. Darmstadt: Techische Hochschule, 1995. 23 f., graf. prikazi. [Report], 3/95. [COBISS.SI-ID
201057]
177.
GRABNAR, Bogdan, PETKOVIĆ, Ljubo, KORELC, Jože, MARTINEC, Niko, VOLČIČ, Janez, LIVK,
Zvone.
Nosilni izolacijski sendvič elementi sestavljeni iz kovinskih oblog in mineralne volne. Ljubljana: ZRMK, 1991. 94 str., ilustr. [COBISS.SI-ID
348007]
2.21 Programska oprema
IZVEDENA DELA (DOGODKI)
3.14 Predavanje na tuji univerzi
182.
KORELC, Jože.
Automation of computational modeling : serija predavanj na Institute fur Kontinuumsmechanik,
Leibniz Universität Hannover, Germany, 21. - 22. 06. 2018. [COBISS.SI-ID
148030211]
183.
KORELC, Jože.
Short course on automation of computational modelling : serija predavanj na Institute
für Kontinuumsmechanik, Leibniz Universität Hannover, Germany, 9-10.2.2023. [COBISS.SI-ID
152700931]
184.
KORELC, Jože.
Automation of computational modeling : predavanje na Institute for Mechanical Systems,
ETH Zurich, Švica, 4. 12. 2022. [COBISS.SI-ID
148026115]
projekt: P2-0158 Gradbene konstrukcije in gradbena fizika; financer: ARRS
185.
KORELC, Jože.
Automation of computational modeling : predavanje na "Short course on automation of
computational modelling" - Università degli studi di Pavia, Italija, 23. 5. 2019. [COBISS.SI-ID
17402371]
186.
KORELC, Jože.
Short course on automation of computational modeling : predavanje na "Graduate school
MUSIC" - Leibniz Universität Hannover, Germany, 21. - 22. 6. 2018. [COBISS.SI-ID
17404419]
187.
KORELC, Jože.
Advanced topics in automation of numerical modelling : predavanje na Graduate School
MUSIC, Leibniz Universität Hannover, Germany, 16.6.2016. [COBISS.SI-ID
8001889]
188.
KORELC, Jože, STUPKIEWICZ, Stanisław.
Constitutive modelling of frictional materials : predavanje, 2.-6.2.2015, University
of Trento, Italy. Trento, 2015. [COBISS.SI-ID
7315297]
189.
KORELC, Jože.
Short Course on Automation of Computational Modeling : predavanje, 12.-13. November
2015, 19-20 November 2015, Leibniz Universität Hannover, Germany. Hannover, 2015. [COBISS.SI-ID
7314529]
190.
KORELC, Jože.
Theory and automation of numerical modeling in mechanics of solids : predavanje, 4.10.-16.10.2015,
Vilnius Gediminas Technical University,. Vilnius, 2015. [COBISS.SI-ID
7283297]
191.
KORELC, Jože.
With Automation Towards the Certified Numerics : predavanje, 16.11.2015, Technische
Universität Braunschweig. Braunschweig, 2015. [COBISS.SI-ID
7315041]
192.
KORELC, Jože.
With Automation Towards the Certified Numerics : predavanje, 25.11.2015, Universität
Duisburg-Essen, Germany. Duisburg-Essen, 2015. [COBISS.SI-ID
7314785]
193.
KORELC, Jože.
Short Course on Automation of Computational Modeling : predavanje, 6.-7.12.2012, Leibniz
Universität Hannover, Germany. Hannover, 2012. [COBISS.SI-ID
6193249]
194.
KORELC, Jože.
Automation of Computational Modeling : predavanje na Università degli Studi di Pavia,
Pavia, Italia, 23.11.2011. Pavia, 2011. [COBISS.SI-ID
5972321]
195.
KORELC, Jože.
Automation of Computational Modeling by Automatic Differentiation : predavanje, 25.1.2011,
Department of Mathematics, Humboldt-Universität zu Berlin, Germany. 2010, Berlin. [COBISS.SI-ID
5320289]
196.
KORELC, Jože.
Hands-on AceGen - AceFEM: a short course : predavanje na Università degli Studi di
Pavia, Pavia, Italia, 24.11.2011. Pavia, 2011. [COBISS.SI-ID
5972577]
197.
KORELC, Jože.
On direct computation of critical points : predavanje na Institute of Fundamental
Technological Research Polish Academy of Sciences, Warsaw, Poland, 8.11.2011. Warsaw, 2011. [COBISS.SI-ID
5972833]
198.
KORELC, Jože.
Stability and imperfection analysis procedures : predavanje, 17.2.2011, Institut für
Mechanik, Karlsruher Institut für Technologie, Germany. 2011, Karlsruhe. [COBISS.SI-ID
5320545]
199.
KORELC, Jože.
Automation of Computational Modeling : predavanje, 11.11.2010, Gotfried Wilhelm Leibniz
Universität Hannover, Germany. 2010, Hannover. [COBISS.SI-ID
5319777]
200.
KORELC, Jože.
Automation of Computational Modeling by Automatic Differentiation : predavanje, Karlsruhe,
Institute of Technology, Germany, 22.6.2010. 2010, Karlsruhe. [COBISS.SI-ID
5074273]
201.
KORELC, Jože.
Short Course on Automation of Computational Modeling : predavanje, 22.-30.11.2010,
Gotfried Wilhelm Leibniz Universität Hannover, Germany. 2010, Hannover. [COBISS.SI-ID
5320033]
202.
KORELC, Jože.
Automation of the finite element method using AceGen/AceFEM : predavanje, Institute
of Fundamental Technological Research, Polish Academy of Sciences, 20.11.2008. [S.l.]: [J. Korelc], 2008. [COBISS.SI-ID
4867937]
203.
KORELC, Jože.
The role of automatic differentiation in computational mechanics : predavanje, Leibniz
Universität Hannover, 13. November 2007. Hannover: Leibniz Universität, 2007. [COBISS.SI-ID
4255585]
204.
KORELC, Jože.
Developing Computational Models on Demand : predavanje, Institute of Fundamental Technological
Research, Polish Academy of Sciences, 11.01.2006. [S.l.]: [J. Korelc], 2006. [COBISS.SI-ID
4256353]
205.
KORELC, Jože.
Advanced problem solving with AceGen : vabljeno predavanje, Institute of Mechanics
and Computational Mechanics, University of Hannover, 29.08.2002. Hannover, 2002. [COBISS.SI-ID
1738081]
206.
KORELC, Jože.
Advanced Techniques in Formulation and Solution of Mechanical problems : predavanja
gostujočega profesorja na Institute of Fundamental Technological Research, Polish
Academy of Sciences, Poljska, 26.10-07.12.2002 : v okviru rednega podiplomskega študija
pri Polish Academy of Sciences v obsegu 16 ur. [S.l.], 2002. [COBISS.SI-ID
2148449]
207.
KORELC, Jože.
Automatic generation of numerical codes in computational mechanics : vabljeno predavanje,
Institut for Structural Analysis, Computational Biomechanics, Graz University of Technology,
Graz, 18-19.9.2001. Graz, 2001. [COBISS.SI-ID
1388129]
208.
KORELC, Jože.
Short seminar on symbolic methods in computational mechanics : [vabljeno predavanje],
Royal Institute of Technology, Dept. Structural Engineering, Stockholm, 2.-3.10. 1998. Stockholm, 1998. [COBISS.SI-ID
658785]
209.
KORELC, Jože.
General formulation of mechanical problems : [vabljeno predavanje], Department of
Civil Engineering, University of Swansea, UK, 22.7.1997. 1997. [COBISS.SI-ID
661089]
210.
KORELC, Jože.
Symbolic formulation of solid finite elements : [predavanje], Institute of Mechanics,
Darmstadt University of Technology, ZRN, 16.1.1995. Darmstadt, 1995. [COBISS.SI-ID
660833]
3.15 Prispevek na konferenci brez natisa
211.
HUDOBIVNIK, Blaž, BÖHM, Christoph, MARINO, Michele, KORELC, Jože, WRIGGERS, Peter.
The Two-scale Methods FE-VE and VE2 Based on the Virtual Element Method for Large
Deformations : predavanje na: 92nd Annual Meeting of the International Association
of Applied Mathematics and Mechanics, 18 August 2022, Aachen, Germany. [COBISS.SI-ID
150771715]
212.
ZUPAN, Nina, KORELC, Jože.
Gradient-based multi-scale optimisation : predavanje na International Workshop-Conference
on Research Challenges in Mechanics: Novel Methods and Applications for Automated
Computational Modeling, 20. 3. 2019, Hannover, Germany. [COBISS.SI-ID
8756321]
213.
ZUPAN, Nina, KORELC, Jože.
Unified approach to sensitivity analysis based automation of multiscale modelling
: posterska predstavitev na International workshop-conference on Research challenges
in mechanics, Applications of automated computational modeling, 1.-3. March 2017,
Hannover, Germany. [COBISS.SI-ID
8007521]
214.
MOK, J. M., WRIGGERS, Peter, KORELC, Jože.
FE2 multi-scale approach for coupled thermo-chemo-mechanical problems : predavanje
na MUMO 2016 "Multiscale Modeling of Heterogeneous Structures", Dubrovnik, 31.9.2016. [COBISS.SI-ID
8005473]
215.
ZUPAN, Nina, KORELC, Jože.
Unified approach to sensitivity analysis based automation of multiscale modelling
: predavanje na MUMO 2016 "Multiscale Modeling of Heterogeneous Structures", Dubrovnik,
22.9.2016. [COBISS.SI-ID
8005217]
216.
MARUCCIO, Claudio, DE LORENZIS, Laura, KORELC, Jože.
Two-scale computational homogenization of piezoelectric textiles : predavanje na XXII
Conference - The Italian Association of Theoretical and Applied Mechanics, Genoa,
14th - 17th September 2015. [COBISS.SI-ID
7489377]
217.
KORELC, Jože.
AceFEM: Studying Large-Scale Finite-Element Problems : predavanje na European Wolfram
Technology Conference, 27.-28. 5. 2014 , Frankfurt. [COBISS.SI-ID
7481697]
218.
KORELC, Jože, WRIGGERS, Peter.
Automation of FE2 Multi - Scale Method : predavanje, 28.07.2011 na USNCCM-11: 11th
U. S. National congress on computational mechanics, Minapolis, Minnesota. 2011, Minnepolis. [COBISS.SI-ID
5971553]
219.
KORELC, Jože.
Formulation of enhanced elements with Taylor expansion of shape functions : [predavanje
na 5. seminarju] Finite elements in snow, Kleinwalsertal, 17.- 20. 1. 1996. Kleinwalsertal, 1996. [COBISS.SI-ID
198753]
220.
KORELC, Jože.
A new formulation of enhanced elements for linear and nonlinear problems : [predavanje
na kongresu] Third U. S. national congress of computational mechanics, Dallas, 12.
- 14. 06. 1995. Dallas, 1995. [COBISS.SI-ID
200033]
3.25 Druga izvedena dela
221.
ŠKERGET, Leopold, ALUJEVIČ, Andro, BAJSIČ, Ivan, BEDENIK, Branko, BOLTEŽAR, Miha,
BRANK, Boštjan, CIZELJ, Leon, DOBOVIŠEK, Borut, EMRI, Igor, FAJFAR, Peter, FLAŠKER,
Jože, GOTLIH, Karl, HOUŠKA, Mladen, KORELC, Jože, KOSEL, Franc, KRALJ, Alojz, KUHELJ,
Anton, KUZMAN, Karl, OBLAK, Maks, RAJAR, Rudolf, POREDOŠ, Alojz, POTRČ, Iztok, RODIČ,
Tomaž, SAJE, Miran, STANIČ, Uroš, ŠIROK, Brane, ŠTOK, Boris, TRAUNER, Ludvik, UMEK,
Andrej, ŽUMER, Slobodan, ŽUN, Iztok,
Člani programskega odbora.
Kuhljevi dnevi 2001. Portorož, 27.-28. september 2001. [COBISS.SI-ID
6967574]
222.
ŠKERGET, Leopold, ALUJEVIČ, Andro, BAJSIČ, Ivan, BEDENIK, Branko, BOLTEŽAR, Miha,
BRANK, Boštjan, CIZELJ, Leon, ČUDINA, Mirko, DOBOVIŠEK, Borut, EMRI, Igor, FAJFAR,
Peter, FLAŠKER, Jože, HOUŠKA, Mladen, KORELC, Jože, KOSEL, Franc, KRALJ, Alojz, KUHELJ,
Anton, KUZMAN, Karl, OBLAK, Maks, RAJAR, Rudolf, POREDOŠ, Alojz, POTRČ, Iztok, RODIČ,
Tomaž, SAJE, Miran, STANIČ, Uroš, ŠIROK, Brane, ŠTOK, Boris, TRAUNER, Ludvik, UMEK,
Andrej, ŽUMER, Slobodan, ŽUN, Iztok,
Člani programskega odbora.
Kuhljevi dnevi 2000. Maribor, 21.-22. september 2000. [COBISS.SI-ID
6968086]
SEKUNDARNO AVTORSTVO
Urednik
224.
MAROVIĆ, Pavao (urednik), KRSTULOVIĆ-OPARA, Lovre (urednik), GALIĆ, Mirela (urednik),
9th International Congress of Croatian Society of Mechanics, Split, Croatia, September
18-22, 2018.
Book of Abstracts. Zagreb: Croatian Society of Mechanics, cop. 2018. XV, 111 str., ilustr. Book of
abstracts (International Congress of Croatian Society of Mechanics). ISSN 2584-7716.
[COBISS.SI-ID
21784598]
225.
GERVÁSIO, Helena, SANTOS, Paulo, SIMÕES DA SILVA, Luís, VASSART, Olivier, HETTINGER,
Anne-Laure, HUET, Valérie, MOŽE, Primož (urednik, prevajalec, tehnični urednik), SINUR,
Franc (urednik), KORELC, Jože (urednik).
Trajnostno vrednotenje jeklenih konstrukcij. Ljubljana: Fakulteta za gradbeništvo in geodezijo, 2014. III, 143 str., ilustr.
ISBN 978-961-6884-24-2.
http://drugg.fgg.uni-lj.si/5026/,
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=69302. [COBISS.SI-ID
276763392]
226.
IV European Conference on Computational Mechanics [also] ECCM 2010, Palais des Congrès,
Paris, France, May 16-21, 2010.
ECCM 2010. Paris: Computational Structural Mechanics Association, 2010, cop. 2008. 1 CD-ROM.
[COBISS.SI-ID
14148374]
227.
GAMS, Matjaž (glavni urednik, član uredniškega odbora).
Računalniški slovarček. 3. razširjena izd. Ljubljana: Institut Jožef Stefan, Odsek za inteligentne sisteme,
2010.
http://dis-slovarcek.ijs.si/about. [COBISS.SI-ID
24181799]
228.
ŠUBIC KOVAČ, Maruška (urednik), KORELC, Jože (urednik), MAJES, Bojan (urednik).
Gradbeništvo : magistrski študijski program druge stopnje. Ljubljana: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo, 2009. 1
zv. (loč. pag.), ilustr. [COBISS.SI-ID
4548193]
229.
ŠUBIC KOVAČ, Maruška (urednik), KORELC, Jože (urednik).
Gradbeništvo : magistrski študijski program druge stopnje. Ljubljana: Univerza v Ljubljani, Fakulteta za gradbeništvo in geodezijo, 2008. 1
zv. (loč. pag.), ilustr. [COBISS.SI-ID
5358689]
230.
KORELC, Jože (urednik), ZUPAN, Dejan (urednik).
SDM - Slovensko društvo za mehaniko. [Ljubljana]: Slovensko društvo za mehaniko, [2007]. 1 optični disk (CD-ROM). [COBISS.SI-ID
236704512]
232.
KORELC, Jože (urednik, recenzent), ZUPAN, Dejan (urednik, recenzent),
Kuhljevi dnevi 2006, Lipica, 21.-22. september 2006.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2006. VI, 302 str., ilustr. ISBN 961-91659-1-8,
ISBN 978-961-91659-1-1.
http://www.km.fgg.uni-lj.si/sdm/zbornik/ZbornikKD06net.pdf. [COBISS.SI-ID
228623104]
234.
KORELC, Jože (urednik), ZUPAN, Dejan (urednik),
Kuhljevi dnevi 2004, Otočec, 30. september - 1. oktober 2004.
Program srečanja. Ljubljana: Slovensko društvo za mehaniko, 2004. 19 str., ilustr., graf. prikazi.
[COBISS.SI-ID
7922715]
235.
KORELC, Jože (urednik), ZUPAN, Dejan (urednik),
Kuhljevi dnevi 2004, Otočec, 30. september - 1. oktober 2004.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2004. VI, 382 str., ilustr., tabele. ISBN
961-90000-9-9.
http://www.km.fgg.uni-lj.si/sdm/zbornik/ZbornikKD2004.pdf. [COBISS.SI-ID
215625728]
Mentor pri doktorskih disertacijah
Mentor pri doktorskih disertacijah (bolonjski študij)
Mentor pri magistrskih delih (bolonjski študij)
Mentor pri diplomskih delih
260.
ČAMPA, Aleš.
Sistem točkovno vpete zasteklitve : diplomska naloga. Ljubljana: [A. Čampa], 2004. Vi, 81, 27 str., pril., ilustr. [COBISS.SI-ID
2606177]
261.
POVHE, Igor.
Tridimenzionalna občutljivostna analiza in optimizacija konstrukcij : diplomska naloga. Ljubljana: [I. Povhe], 2002. 94 f., graf. prikazi. [COBISS.SI-ID
1667169]
Mentor pri diplomskih delih (bolonjski študij 1. stopnje)
Mentor - drugo
274.
ŠOLINC, Urša.
Razvoj stabilnih končnih elementov za velike deformacije : delo je pripravljeno v
skladu s Pravilnikom o podeljevanju Prešernovih nagrad študentom pod mentorstvom izr.
prof. dr. Jožeta Korelca. Ljubljana: [U. Šolinc], 2009. VII, 104 str., ilustr. [COBISS.SI-ID
4886369]
nagrada: Prejemnica fakultetne Prešernove nagrade za štud. leto 2008/2009
Somentor pri doktorskih disertacijah
276.
JEROMEL, Gregor.
Konstitutivni model večkrat porušene krovnine pri podzemnem odkopavanju premoga :
doktorska disertacija. Ljubljana: [G. Jeromel], 2010. XXII, 168 f., ilustr. [COBISS.SI-ID
1029471]
277.
SKUBER, Peter.
Analiza nizkocikličnega utrujanja jeklenih konstrukcij na osnovi mehanskih poškodb
: doktorska disertacija. Ljubljana: [P. Skuber], 2003. 132 str., ilustr. [COBISS.SI-ID
2123105]
278.
ŠUŠTAR, Tomaž.
A solution approach to non-linear multi-field problems : PhD-thesis. Swansea: [T. Šuštar], 2002. 159 f., graf. prikazi. [COBISS.SI-ID
1932129]
Recenzent
279.
LOPATIČ, Jože (urednik, recenzent), MOŽE, Primož (urednik), MARKELJ, Viktor (urednik).
Zbornik. Ljubljana: Slovensko društvo gradbenih konstruktorjev, 2019. IV, 318 str., ilustr.
ISBN 978-961-93926-4-5. [COBISS.SI-ID
302298624]
280.
IBRAHIMBEGOVIĆ, Adnan (urednik, recenzent), BRANK, Boštjan (urednik, član uredniškega
odbora), KOŽAR, Ivica (urednik, recenzent).
3rd International Conference on Multiscale Computational Methods for Solids and Fluids,
September 20-22, 2017, Ljubljana, Slovenia. Ljubljana: Faculty of Civil and Geodetic Engineering, 2017. ISBN 978-961-6884-49-5.
https://repozitorij.uni-lj.si/Dokument.php?id=103267,
http://www.dlib.si/details/URN:NBN:SI:doc-JVBM0KRX,
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=94462. [COBISS.SI-ID
291064064]
281.
LOPATIČ, Jože (urednik, recenzent), MOŽE, Primož (urednik, recenzent), MARKELJ, Viktor
(urednik, recenzent).
Zbornik. Ljubljana: Slovensko društvo gradbenih konstruktorjev, 2017. 256 str., ilustr. ISBN
978-961-93926-2-1. [COBISS.SI-ID
292726272]
282.
HRIBERŠEK, Matjaž (urednik, recenzent), RAVNIK, Jure (urednik, recenzent),
Kuhljevi dnevi 2014, Maribor, 24.-25. september, 2014.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2014. VI, 248 str., ilustr. ISBN 978-961-91659-9-7.
http://www.drustvozamehaniko.si/zbornik/ZbornikKD2014.pdf. [COBISS.SI-ID
274966016]
283.
HRIBERŠEK, Matjaž (urednik, recenzent), RAVNIK, Jure (urednik, recenzent),
Kuhljevi dnevi 2013, Rogaška Slatina, 25.-26. september, 2013.
Zbornik del. Ljubljana: SDM - Slovensko društvo za mehaniko, 2013. V, 242 str., ilustr. ISBN
978-961-91659-8-0.
http://www.drustvozamehaniko.si/zbornik/ZbornikKD2013.pdf. [COBISS.SI-ID
268070144]
284.
6th European Congress on Computational Methods in Applied Sciences and Engineering
(ECCOMAS 2012), September 10-14, 2012, Vienna, Austria.
ECCOMAS 2012 CD-ROM Proceedings : Proceedings of the 6th European Congress on Computational
Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012,
Vienna, Austria. Vienna: University of Technology, 2012. 1 optični disk (CD-ROM). ISBN 978-3-9502481-9-7.
[COBISS.SI-ID
5948513]
285.
HRIBERŠEK, Matjaž (urednik, recenzent), RAVNIK, Jure (urednik, recenzent),
Kuhljevi dnevi 2012, Rogaška Slatina, 26.-27. september, 2012.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2012. VI, 300 str., ilustr. ISBN 978-961-91659-7-3.
http://www.drustvozamehaniko.si/zbornik/ZbornikKD2012.pdf. [COBISS.SI-ID
262291712]
286.
TCCM 2011 : Trends & Challenges in Computational Mechanics, 12 - 14 September 2011,
Anula E, Palazzo del Bò, Universitià di Padova, Padua, Italy : A Conference in Honor
of Peter Wriggers' 60th Birthday : Program and Abstracts. Padova: Universitià di Padova, 2011. 154 str., ilustr. ISBN 978-88-96477-22-9. [COBISS.SI-ID
5956449]
287.
TAMMA, Kumar K. (urednik).
USNCCM-11 : 11th U. S. National congress on computational mechanics, Minapolis, Minnesota,
july 25-28, 2011 : conference program. Minnepolis: US Association for Computational Mechanics, 2011. 122 str. [COBISS.SI-ID
5971297]
289.
IV European Conference on Computational Mechanics [also] ECCM 2010, Palais des Congrès,
Paris, France, May 16-21, 2010.
ECCM 2010. Paris: Computational Structural Mechanics Association, 2010, cop. 2008. 1 CD-ROM.
[COBISS.SI-ID
14148374]
290.
ŠIROK, Brane (urednik, recenzent), EBERLINC, Matjaž (urednik),
Kuhljevi dnevi, 23. september 2010, Ljubljana.
Zbornik del. Ljubljana: SDM - Slovensko društvo za mehaniko, 2010. V, 290 str., ilustr. ISBN
978-961-91659-5-9.
http://193.2.78.22/lvts/sdm/zbornik/ZbornikKD2010.pdf. [COBISS.SI-ID
252555520]
292.
Proceedings of the 6th International Congress of Croatian Society of Mechanics Dubrovnik,
Croatia, September 30 - October 2, 2009. Zagreb: Croatian Society of Mechanics, cop. 2009. Besedilni podatki. ISBN 978-953-7539-11-5.
[COBISS.SI-ID
1242107]
293.
BOLTEŽAR, Miha (urednik, recenzent), SLAVIČ, Janko (urednik, recenzent),
Kuhljevi dnevi, 24. September 2009, Cerklje na Gorenjskem.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2009. IV, 202 str., ilustr., tabele. ISBN
978-961-91659-4-2.
http://www.drustvozamehaniko.si/kd2009/ZbornikKD2009.pdf. [COBISS.SI-ID
247278080]
294.
KORELC, Jože (urednik, recenzent), ZUPAN, Dejan (urednik, recenzent),
Kuhljevi dnevi 2006, Lipica, 21.-22. september 2006.
Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2006. VI, 302 str., ilustr. ISBN 961-91659-1-8,
ISBN 978-961-91659-1-1.
http://www.km.fgg.uni-lj.si/sdm/zbornik/ZbornikKD06net.pdf. [COBISS.SI-ID
228623104]
Član komisije za zagovor
296.
GOMBOŠI, Jana.
Vpliv zaostalih napetosti na obnašanje ojačanih ukrivljenih pločevin : delo je pripravljeno
v skladu s Pravilnikom o podeljevanju Prešernovih nagrad študentom, pod mentorstvom
doc. dr. Primoža Možeta in somentorstvom asist. Sare Piculin. Ljubljana: [J. Gomboši], 2019. X, 70 str., 2 pril., ilustr. [COBISS.SI-ID
9028449]
nagrada: Prejemnica fakultetne Prešernove nagrade za štud. leto 2018/2019
297.
GOMBOŠI, Jana.
Vpliv zaostalih napetosti na obnašanje ojačanih ukrivljenih pločevin : magistrsko
delo = Influence of Residual Stresses on the Behaviour of Stiffened Curved Panels
: master thesis. Ljubljana: [J. Gomboši], 2018. XIV, 72 str., 15 pril., ilustr.
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=105292. [COBISS.SI-ID
8619105]
310.
MLAKER, Pavel.
Načrtovanje avtocestnih vozlišč s presojo variant z vidika prometne uspešnosti in
varnosti - primer preureditve priključka Ljubljana Rudnik : diplomska naloga = Motorway
junction design with emphasis on traffic performance and safety assesment - case study
junction Ljubljana Rudnik : graduation thesis. Ljubljana: [P. Mlaker], 2013. XVIII, 76 str., 22 pril., ilustr.
http://drugg.fgg.uni-lj.si/4193/,
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=2491. [COBISS.SI-ID
6244961]
Izbrani format bibliografske enote: ISO 690
Razvrščanje bibliografskih enot: tipologija, leto - padajoče, naslov
Vir bibliografskih zapisov: vzajemna baza podatkov COBISS.SI/COBIB.SI, 16. 4. 2024